Winter severity in Europe: The fourteenth century

The fourteenth century is known to include a period of winter cooling in Central and Western Europe, but its timing and magnitude are not clearly established. An attempt to obtain a coherent picture from verified documentary evidence yielded 2133 records from a region covering Central Europe and Northern Italy, mostly originating from the Monumenta Germaniae Historica. Temperatures were assessed using semi-quantitative indices on the basis of proxy information on snow-cover, ice and untimely activity of vegetation. Results: A run of cold winters from 1303 to 1328 was followed by a run of average winters up to 1354. Then winter temperatures were extremely variable up to 1375. For the rest of the century they fluctuated somewhat below the average of the twentieth century. The pattern in the first five decades is compared to that in the Late Maunder Minimum (1675–1715). The possible role of forcing factors (variations in solar output, North Atlantic Deep Water formation) is briefly discussed.     

Assessment of Nitrate—Nitrogen Distribution in Kansas Groundwater, 1990–1998

Nitrate-nitrogen (nitrate-N) in groundwater is a potential problem in many parts of Kansas.From 1990 to 1998, 747 water samples were collected from domestic, irrigation, monitoring,and public water supply wells primarily from the western two-thirds of the state, and analyzedfor nitrate-N by the Kansas Geological Survey. Nitrate-N concentrations of the 747 samplesanalyzed range from 29% with less than or equal to 3 mg/L, 51% between 3 and 10 mg/L,and 20% greater than or equal to 10 mg/L. Factors that show a statistically significantrelationship with the occurrence of nitrate-N in Kansas groundwater in this assessment includegeographic area of the state, depth of well, and age of well. Nitrate-N levels of wells screenedin the High Plains aquifer in south-central Kansas showed a statistically higher concentrationthan samples collected from the High Plains aquifer in the western portion of the state.Comparison of nitrate-N with depth of well indicated that shallower wells throughout the stategenerally have higher nitrate-N values than deeper wells. Irrigation wells older than 1975showed statistically higher nitrate-N concentration than wells installed during and since 1975,possibly related to changes in well-construction practices and regulations that occurred in 1975.     

Contemporary 14C radiocarbon levels of oxygenated polybrominated diphenyl ethers (O-PBDEs) isolated in sponge-cyanobacteria associations

Considerable debate surrounds the sources of oxygenated polybrominated diphenyl ethers (O-PBDEs) in wildlife as to whether they are naturally produced or result from anthropogenic industrial activities. Natural radiocarbon (¹⁴C) abundance has proven to be a powerful tool to address this problem as recently biosynthesized compounds contain contemporary (i.e. modern) amounts of atmospheric radiocarbon; whereas industrial chemicals, mostly produced from fossil fuels, contain no detectable ¹⁴C. However, few compounds isolated from organisms have been analyzed for their radiocarbon content. To provide a baseline, we analyzed the ¹⁴C content of four O-PBDEs. These compounds, 6-OH-BDE47, 2′-OH-BDE68, 2′,6-diOH-BDE159, and a recently identified compound, 2′-MeO-6-OH-BDE120, were isolated from the tropical marine sponges Dysidea granulosa and Lendenfeldia dendyi. The modern radiocarbon content of their chemical structures (i.e. diphenyl ethers, C₁₂H₂₂O) indicates that they are naturally produced. This adds to a growing baseline on, at least, the sources of these unusual compounds.     

Using low-density discrete Airborne Laser Scanning data to assess the potential carbon dioxide emission in case of a fire event in a Mediterranean pine forest

The aim of study is to map the carbon dioxide (CO₂) emission of the aboveground tree biomass (AGB) in case of a fire event. The suitability of low point density, discrete, multiple-return, Airborne Laser Scanning (ALS) data and the influence of several characteristics of these data and the study area on the results obtained have been evaluated. A sample of 45 circular plots representative of Pinus halepensis Miller stands were used to fit and validate the model of AGB. The ALS point clouds were processed to obtain the independent variables and a multivariate linear regression analysis between field data and ALS-derived variables allowed estimation of AGB. Then, the influence of several characteristics on the residuals of the model was analyzed. Finally, conversion factors were applied to obtain the CO₂ values. The AGB model presented a R² value of 0.84 with a relative root-mean-square error of 27.35%. This model included ALS variables related to vegetation height variability and to canopy density. Terrain slope, aspect, canopy cover, scan angle and the number of laser returns did not influence AGB estimations at plot level.     

Variation of mineral composition,fabric and oxygen fugacity from massive to foliated eclogites during exhumation of subducted ocean crust in the North Qilian suture zone,NW China

Eclogites from the North Qilian suture zone are high‐pressure low‐temperature metamorphic rocks of ocean crust protolith, and occur in both massive and foliated varieties as individual blocks of tens to hundreds of metres in size. The massive type is weakly deformed and shows granoblastic texture characterized by a coarse‐grained peak mineral assemblage of Grt¹ + Omp¹ + Ph + Rt ± Lws (or retrograde Cz). In contrast, the foliated type is strongly deformed and shows a fine‐grained retrograde mineral assemblage of Grt² + Omp² + Cz + Gln + Ph. Both total FeO and aegirine contents in omphacite, as well as X_Fe[=Fe³⁺/(Fe³⁺ + Al^VI)] in clinozoisite/epidote, increase significantly from massive to foliated eclogites. Lattice preferred orientation (LPO) of omphacite, determined by electron back‐scatter diffraction analysis, is characterized by weak and strong SL‐type fabrics for massive and foliated eclogites, respectively. Clinozoisite/epidote also developed SL‐type fabric, but different from the LPOs of omphacite in <010> and <001> axes, owing to their opposite crystallographic long and short axis definitions. The transition of deformation mechanism from dislocation creep to diffusive mass transfer (DMT) creep in omphacite and the concomitant retrograde metamorphism both are efficiently facilitated when the original coarse‐grained Omp¹ + Grt¹ + Lws assemblage is dynamically recrystallized and retrogressed into the fine‐grained Fe³⁺‐rich assemblage of Omp² + Grt² + Cz + Gln. The DMT process with concomitant anisotropic growth assisted by fluids is considered to be an important deformation mechanism for most minerals in the foliated eclogite. P–T estimates yielded 2.3–2.6 GPa and 485?510 °C for the massive eclogite and 1.8–2.2 GPa and 450?480 °C for the foliated eclogite. The significant increase in total Fe and Fe³⁺ contents in omphacite and clinozoisite/epidote from massive to foliated eclogite suggests changes in mineral compositions accompanied by an increase in oxygen fugacity during ductile deformation associated with exhumation. The LPO transition of omphacite, clinozoisite and rutile from weak SL‐type in massive eclogites to strong SL‐type in foliated eclogites is interpreted to represent the increment of shear strain during exhumation along the ‘subduction channel’.     

High-resolution profiles of iron, manganese, cobalt, cadmium, copper and zinc in the pore water of estuarine sediment

The remobilization of iron, manganese, cobalt, cadmium, copper and zinc in the pore water of estuarine sediment cores at Yingkou was assessed using diffusive equilibrium in thin films and diffusive gradients in thin films techniques. A relatively anoxic system (+33.7 to ?224.1 mV) in the sediment cores might cause the reductive release of iron, manganese and cobalt into pore water from the estuarine sediment. High-average concentrations of iron (47.85 μg ml^?1) and manganese (3.81 μg ml^?1) were observed using diffusive equilibrium in thin films on the sediment core, but the concentration of cobalt (18.02 ng ml^?1) was relatively low. A strong correlation between iron and cobalt was observed based on the vertical profiles of the metals. Manganese and iron were more readily released from the solid phase to the solution. The peak cobalt, copper and zinc concentrations were observed in the upper layer (2–4 cm) measured using diffusive gradients in thin films. However, the peak iron, manganese and cobalt concentrations were located in the deeper layer (≥7 cm). In addition, the concentration profiles measured using diffusive gradients in thin films of cobalt, copper and zinc were independent of the iron, manganese and cobalt distribution with respect to depth.     

Seasonal variation in the biogeochemical cycling of seston in Grand Traverse Bay, Lake Michigan

This study describes the biogeochemical cycling of seston in Grand Traverse Bay, Lake Michigan. Seston was characterized by carbon and nitrogen elemental and isotopic abundances. Fluorescence, temperature, light transmittance, and concentrations of dissolved inorganic nitrogen were also determined. PCBs were analyzed from surface (10 m) seston and ΣPCB was calculated by summing all of the congeners quantified in each sample. The vertical and seasonal trends in the δ¹³C values of seston exhibited a broad range from −30.7 to −23.9‰. Low δ¹³C values that occur concurrently with a peak in fluorescence below the thermocline reflect uptake of ¹³C depleted respiratory CO₂ and/or the accumulation of ¹³C depleted lipids by phytoplankton. High δ¹³C values late in the season likely result from a reduction in photosynthetic fractionation associated with a decrease in the CO₂ pool. Seasonal δ¹⁵N values of seston were high in the spring and declined through August. The δ¹⁵N values of seston reflect a balance between fractionation during assimilation of NH₄⁺ or NO₃⁻ and degradative processes. The seston ΣPCB and fluorescence were both high in the spring and subsequently declined, suggesting that the concentrations of PCBs in seston were associated with labile material derived from primary productivity. The strong seasonal trends in the organic geochemical characteristics of seston and concentrations of PCBs emphasize the complex nature of particle cycling in aquatic environments.     

Holocene reef growth in Torres Strait

The platform and fringing reefs of Torres Strait are morphologically similar to reefs of the northern Great Barrier Reef to the south, except that several are elongated in the direction of the strong tidal currents between the Coral Sea and the Gulf of Carpentaria. Surface and subsurface investigations and radiocarbon dating on Yam, Warraber and Hammond Islands reveal that the initiation and mode of Holocene reef growth reflect antecedent topography and sea-level history. On the granitic Yam Island, fringing reefs have established in some places over a Pleistocene limestone at about 6 m depth around 7000 years BP. Emergent Holocene microatolls of Porites sp. indicate that the reefs have prograded seawards while sea level has fallen gradually from at least 0.8 m above present about 5800 years BP. On the Warraber Island reef platform drilling near the centre indicated a Pleistocene limestone foundation at a depth of about 6 m over which reefs established around 6700 years BP. Reef growth lagged behind that on Yam Island. Microatolls on the mature reef flat indicate that the reef reached sea level around 5300 years BP when the sea was around 0.8–1.0 m above present. On the reef flat on the western side of Hammond Island bedrock was encountered at 7–8 m depth, overlain by terrigenous mud. A progradational reef sequence of only 1–2 m thickness has built seaward over these muds, as sea level has fallen over the past 5800 years. Reef-flat progradation on these reefs is interpreted to have occurred by a series of stepwise buildouts marked by lines of microatolls parallel to the reef crest, marking individual coalescing coral heads. Detrital infill has occurred between these. This pattern of reef progradation is consistent with the radiocarbon dating results from these reefs, and with seismic investigations on the Torres Reefs.     

Evaluation of MM5 mesoscale model at local scale for air quality applications over the Swedish west coast: Influence of PBL and LSM parameterizations

Summary The performance of MM5 mesoscale model (Version 3.6.3) using different planetary boundary layer (PBL) and land surface model (LSM) parameterizations is evaluated and compared using high temporal and spatial resolution G?TE2001 campaign data at local scale (a few kilometers) over the Greater G?teborg area along the Swedish west coast during 7–20 May 2001. The focus is on impact of PBL and LSM parameterizations on simulated meteorological variables important for air quality applications such as global radiation, diurnal cycle of near-surface air temperature and wind, diurnal cycle intensity, near-surface vertical temperature gradient, nocturnal temperature inversion, boundary layer height, and low-level jet (LLJ). The model performance for daytime and nighttime and under different weather conditions is also discussed. The purpose is to examine the performance of the model using different PBL and LSM parameterizations at local scale in this area for its potential applications in air quality modeling. The results indicate that the influence of PBL and LSM parameterizations on simulated global radiation, diurnal cycle of near-surface air temperature and wind speed, diurnal cycle intensity, vertical temperature gradient, nocturnal temperature inversion and PBL heights, which are critical parameters for air quality applications, is evident. Moreover, the intensity and location of LLJ are simulated well by all schemes, but there also exist some differences between simulated results by using different PBL and LSM schemes. Therefore, the choice of PBL and LSM parameterizations is important for MM5 applications to air quality studies. Correspondence: Junfeng Miao, Department of Earth Sciences, G?teborg University, P.O. Box 460, 405 30 G?teborg, Sweden     

Sea/land breeze climatological characteristics along the northern Croatian Adriatic coast

Summary Climatological characteristics along the northern Croatian Adriatic coast have been examined for nine meteorological stations for the summertime sea/land breeze circulation. The stations considered are Pula-airport, Opatija, Rijeka, Senj, Malinska, Rijeka-airport, Mali Lošinj, Rab and Zadar. The hourly surface measurements at each station from June to September for the period 1991–2004 as well as the radiosoundings in Zadar (from 2002 to 2004) were used for the analysis. A dataset with the sea/land breeze days was formed according to the several criteria. The mean daily maxima of both air and sea surface temperatures were more influenced by the large scale disturbances toward north (e.g. in Rijeka or Opatija) compared to the values for e.g. Zadar. Furthermore, the influence of the large scale disturbances diminished toward the south concerning the sea–land temperature difference only at the stations placed at Rijeka Bay and Velebit channel. The strongest sea breeze was found at Pula-airport and the most frequent ones at Opatija and Zadar. At Senj the rarest, the weakest and the shortest sea breeze was observed. The climatological records of wind speed and air-sea temperature difference (ΔT) showed for Opatija, Malinska and Zadar that the maximum measured wind speed is around 4.5 °C confirming the nonlinear relationship between the sea breeze speeds and the ΔT during the day. At most stations, the clockwise rotation of the hodographs prevails which is typical for the Northern hemisphere due to Coriolis force, with the exception at Senj and Malinska. While the hodographs for Pula, Rijeka-airport and Mali Lošinj display a later onset of the prevailing sea breeze because of the interaction among several sea breeze circulations, the results for Opatija, Zadar and Senj show considerably distorted hodographs because of the nearby channeling of the air flow.