Using ocean ambient noise for array self-localization and self-synchronization

Estimates of the travel times between the elements of a bottom hydrophone array can be extracted from the time-averaged ambient noise cross-correlation function (NCF). This is confirmed using 11-min-long data blocks of ambient noise recordings that were collected in May 1995 near the southern California coast at an average depth of 21 m in the 150-700 Hz frequency range. Coherent horizontal wavefronts emerging from the time derivative of the NCF are obtained across the array's aperture and are related to the direct arrival time of the time-domain Green's function (TDGF). These coherent wavefronts are used for array element self-localization (AESL) and array element self-synchronization (AESS). The estimated array element locations are used to beamform on a towed source.     

Multi-bioindicator study of a small estuary in Vendée (France)

Surficial sediment (about 5 mm) was scraped off in 15 stations selected in the Vie Estuary, a small estuary on the French Atlantic coast. The samples, prepared using the suitable methods, were used for comparing the behaviour of periphytic algae, sporopollinic and other palynologic material, ostracoda and foraminifera for proposing a synthetic evaluation of the information provided by each of them. Dinoflagellate cysts, which are found in an almost monospecific assemblage in low-salinity water, are dispersed by tidal currents, but the location of tintinnids in only the lower reaches shows a limited inward transport. Sporopollinic material is clearly related to the adjacent vegetation, indicating a local origin, and then little influence of transport on the microbenthos, even if fragments of freshwater crustaceans and of Pediastrum alga are found down to the mouth in the sporopollinic deposits. This limited transport of microbenthos allows the use of periphytic algae, benthic ostracoda and benthic foraminifera as indicators of local environmental conditions. It was then possible to determine the extent of marine influence in the estuary, to discriminate between the main channel and adjacent basins, and between different stages of evolution of the basins, from a recently dug basin to a eutrophicated one.     

Heated diver decompression shelter: The “womb concept”

A hybrid thermal protection method using waste heat from a surface-mounted outboard motor is shown to create a warm “micro-climate” environment for divers. The effects of surface heater capacities, water flow rates, shelter volume and shelter insulation on micro-climate temperatures are characterized. During long, cold-water decompression stops this method offers a reliable, low-cost alternative to surface-supplied hot water suits or diver-carried heating systems. An added bonus for divers using closed-circuit breathing apparatus is prolonged durations of their carbon dioxide scrubbers when surrounded by the warm water “micro-climate”. Closed-circuit and open-circuit options of this diver decompression shelter concept are evaluated.     

The bottom currents in the area of abyssal hills in the north-east tropical Pacific Ocean

The results of simultaneous measurements of the bottom (6.25 and 35 m above the bottom) currents, deep currents, and surface currents made at three points in the north-east tropical Pacific Ocean are given. The bottom intensification of the current velocity is revealed in a layer of 35–25 m above the bottom. The estimation of the thickness of the bottom boundary layer (BBL) indicates that the velocity intensification is observed over the boundary layer upper border. A 10-day long benthic storm with a maximum measured velocity of 13 cm/s was revealed 6 m above the bottom. As was found, the origin of the benthic storm is associated with the penetration of an anticyclonic eddy down to the bottom.Translated by Mikhail M. Trufanov.     

Numerical calculation for the flow of submerged bodies under a free surface

The flow field generated by a Rankine body moving under a free surface in afinite-depth water is calculated by potential theory. Velocity field generated by a source located at the origin is calculated first by using highly efficient and adaptive quadratures of the QUADPACK library. This solution is used for generating the flow around a Rankine body by locating a source and an equal strength sink along the body axis. Results agree well with the existing literature.     

Implications from a field study regarding the relationship between polycyclic aromatic hydrocarbons and glutathione S-transferase activity in mussels

An aluminium smelter on the west coast of Scotland discharges an aqueous effluent containing polycyclic aromatic hydrocarbons (PAHs) at the head of Loch Leven. The loch also supports two mussel (Mytilus edulis) farms. Data are presented on burdens of PAHs in the soft tissues of mussels and the effect of these contaminants on glutathione S-transferase (GST) activity in mussel hepatopancreas. GST activity is shown to be correlated with total PAH burden and also with the concentrations of certain individual PAHs. These field data show that high molecular weight PAHs are closely correlated to GST activity, whereas low molecular weight PAHs are not. This suggests that 5- and 6-ring PAHs have a more pronounced role than 2- to 4-ring compounds in inducing GST activity in mussels from Loch Leven. It is proposed that it may be more appropriate to link GST activity with 5- and 6-ring compounds only, rather than with the total PAH burden.     

Sensitivity to stress of the estuarine bivalve Macoma balthica from areas between the Netherlands and its southern limits (Gironde)

Variation in the sensitivity to stress of Macoma balthica was measured in several French and Dutch estuaries. For adult and juvenile Macoma balthica exposed to copper under conditions of starvation, differences in mortality rate, condition, glycogen, burrowing rate and copper content were assessed. No significant differences were observed between adults and juveniles; the influence of treatment and origin was always evident. Animals from the most southern estuaries, Loire and Gironde, near to the species's southern limit of distribution, showed, in the field, the strongest deviations for the ecophysiological traits measured, and were in the experiments the most sensitive to stress.     

Measurement of the redox speciation of iron in seawater by catalytic cathodic stripping voltammetry

Catalytic cathodic stripping voltammetry (CSV) preceded by adsorptive collection of complexes of 1-nitroso-2-napthol (NN) can be used to determine iron in seawater. It is shown here that iron(II) is effectively masked in the presence of 2,2-dipyridyl (Dp) so that iron(III) is measured selectively. The concentration of iron(II) is then calculated as the difference between the concentrations of reactive iron (Fe_R) in the absence and presence of 2 μM Dp, Fe_R being defined as that which was complexed by 20 μM NN at pH 6.9 in the presence of 1.8 mM H₂O₂ and 5 ppm sodium dodecyl sulphate. A 30 min reaction time was allowed for Dp to react with iron(II) in seawater prior to the determination of reactive iron(III) using the same conditions as used for Fe_R. Detection limits of 0.08 nM, 0.077 nM and 0.12 nM were obtained for Fe_R, iron(III) and iron(II), respectively, using a 60 s deposition time.The method was utilised to determine the redox speciation of iron in the northern North Sea. Concentrations of Fe_R ranged between 0.8 and 3.5 nM with nutrient-like depth profiles. Iron(II) was found to be present at concentrations up to 1.2 nM, the highest concentrations occurring in the upper 20 m of the water column.     

Risk of dike failure due to flow slides

Flow slides may affect the stability of dikes. A flow slide is an instability of a submerged slope caused by liquefaction of loose, (medium) fine sand. Whether a flow slide will occur depends on the properties of the sand, which are a function of its density, and the geometry of the slope, as determined by wave and current induced scour and sedimentation. The influence of sand properties and the geometry parameters on the risk of flow slides are discussed. The application of a flow slide prediction method to an example and a risk analysis is briefly discussed.     

A comparative study of some directional sea models

Current specification of the ocean wave environment for the design of offshore platforms does not adequately describe the directional nature of a real seaway. The strong wave frequency dependent nature of the directional behavior of observed seas is often over-simplified for design. A general formulation encompassing a wide range of directional sea models is presented. Parameter values used in some of the more popular directional sea models are examined. Approximate expressions for the two frequency dependent parameters in a modified Longuet-Higgins cosine wave spreading model are presented. A general procedure which allows an engineer to estimate parameters for alternate wave spreading models is discussed. To illustrate this procedure an empirically based modified cosine spreading model is used as the basis to estimate frequency dependent parameters for circular normal and wrapped Gaussian wave spreading models. A comparison of the contours of the various directional sea models and the prediction of the root-mean-square velocity distribution is presented.