Green water overtopping analyzed with a SPH model

Wave overtopping on the decks of offshore platforms and ships can cause severe damage due to the high forces generated by the water. This phenomenon is analyzed within the framework of the Smoothed Particle Hydrodynamics (SPH) method. The presence of a fixed horizontal deck above the mean water level modifies strongly the wave kinematics. In particular, the flow in the wave crest is split into two, showing a different behavior above and below the deck. Numerical results generated by the SPH method are compared to laboratory experiments. The formation of a jet in the rear of the deck after overtopping is observed under extreme conditions.     

Upper temperature tolerances of exotic brackish-water mussel, Mytilopsis leucophaeata (Conrad): an experimental study

The dark false mussel, Mytilopsis leucophaeata is an important mussel colonising the brackish-water systems of temperate and subtropical regions. Of late it has earned notoriety as a biofouling species in industrial cooling water systems. However, there are no published data on the temperature tolerance of this species. This paper presents data on the upper temperature tolerance of this mussel from the view point of biofouling control using thermal methods. In addition to mortality, response of physiological activities such as oxygen consumption, filtration rate, foot activity and byssus thread production were also studied at temperatures varying from 5 to 35 degrees C. Experiments were also carried out to understand the effect of mussel size, breeding condition, nutritional status and acclimation conditions (temperature and salinity) on the mortality pattern. The physiological activities were significantly reduced at temperatures beyond 27.5 degrees C and ceased at 35 degrees C. In 20 mm size group mussels exposed to 37 degrees C, 50% mortality was observed after 85 min and 100% mortality after 113 min. The effect of mussel size on mortality at different temperatures was significant, with the larger size group mussels showing greater resistance. M. leucophaeata collected during the non-breeding season (December-April) were more tolerant to temperature than those collected during the breeding season (June-October). Nutritional status of the mussel had no significant influence on the thermal tolerance of the mussel: fed and starved (non-fed) mussels succumbed to temperature at comparable rates. The effect of acclimation temperature and acclimation salinity on M. leucophaeata mortality at different temperatures was significant. Survival time increased with increasing acclimation temperature and decreased with increasing salinity. In comparison with other co-occurring species such as Mytilus edulis and Dreissena polymorpha, M. leucophaeata appears to be more tolerant to high temperature stress.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.     

Seasonal Variations in the Grain Size Distribution and Mineral Composition of Suspended Particulate Matter of the Northern Dvina River

Oceanology - The paper presents the first results of a study of seasonal variations in the grain size distribution and mineral compositions of suspended particulate matter (SPM) of the Northern...     

Radiation-Geochemical Stability of Bottom Sediments in the Ob and Yenisei Estuaries and Adjacent Shoal Area of the Kara Sea

Oceanology - This paper reports the results of investigations on the radioecological state of bottom sediments of the Ob–Yenisei shoal area and Ob and Yenisei estuaries. Materials were...     

Automatic Profiling System for Underice Measurements

The article is devoted to the development of an autonomous profiling system for measuring the aquatic environment under ice. The system moves up and down in the water column along a cable with a load at the lower end, which is lowered into a lane in the ice. The system carrier is designed for transporting an acoustic Doppler current profiler and a salinity, temperature, and pressure probe. The system will be useful for long-term measurements of vertical profiles of the current speed and marine environment parameters, as well as ice draft. The article describes in detail the structure and operation of the system. The hydraulic scheme of the carrier buoyancy system is presented.

     

Method of Spherical Phase Screens for Modeling the Propagation of Diverging Beams in Inhomogeneous Media

Izvestiya, Atmospheric and Oceanic Physics - The phase-screen (split-step) method is widely used for modeling wave propagation in inhomogeneous media. The method of plane phase screens is best...     

Traces of Seismic Activity in Architectural Monuments in Derbent,Dagestan

Izvestiya, Atmospheric and Oceanic Physics - As a result of studies conducted in the city of Derbent, it is established that its monumental fortification structures erected at the end of the 560s...     

Algorithm for the Atmospheric Correction of Shortwave Channels of the MSU-MR Radiometer of the Meteor-M No. 2 Satellite

Izvestiya, Atmospheric and Oceanic Physics - The problem of atmospheric correction for shortwave channels of a multispectral low-resolution scanning radiometer onboard the Meteor-M No. 2 satellite...     

Instrument calibration of ocean bottom seismographs

To increase the accuracy of measuring sea floor motion with ocean bottom seismometers, we calibrate the seismometer system on the ocean floor. Data from the sea floor calibration, augmented with electronic and land calibration data, enables us to find the OBS transfer function to an accuracy of 0.5% in the frequency range of 0.1 to 32 Hz. We are able to distinguish between temperature, instrument and OBS ground coupling effects, all of which alter the transfer function. This paper reviews our method of calibration and discusses the effects of temperature and some of the instrument design features on the vertical seismometer transfer function.