Experimental study on loss factor for corrugated plates by bandwidth method

The material loss factor for technically orthotropic plates was measured by half-power bandwidth method. Rectangular and trapezoidal corrugated plates of steel were considered. A simple isotropic steel plate was also considered for comparison of the results. The concept of single degree of freedom system was adopted. The tests were undertaken at very low frequency range (0–100) Hz. The plate models were suspended freely with two wires to minimize or prevent excessive extraneous energy dissipation. Out of plane point force, random in nature was applied to the top middle of the plates and the responses were measured from the middle point of the plates by FFT analyzer using miniature small mass accelerometer as sensor. The aim of these tests is to investigate the effects of bending rigidity and mode orders over material loss factor. The values of estimated modal damping loss factors are compared and tabulated for the plates models considered. Natural frequencies of some of the initial modes of the plates are also presented.It is observed that the higher the value of bending rigidity of the plates, the larger the values of loss factor of it. There was a significant increase in value of loss factor in corrugated plates to that of the isotropic plate.     

Regimes and the history of the major fisheries off Canada's west coast

The major fisheries on the Pacific coast of Canada can be grouped into 12 species that have consistently represented about 80–90% of the total catch from the past to the present. A review of population dynamics of these species indicates that climate and the ocean environment have a major impact on their productivity. We review the history of Canada's Pacific coast fishery to show that trends in catch were similar to trends in the climate and ocean environment. Decadal scale patterns in climate and the ocean are termed regimes and we show that it is the regime scale of climate variability that most influences the long-term trends in the catches in these major fisheries. Ignoring the impacts of regime shifts on the abundance trends in the future could result in collapses of major fisheries. The difficulty of knowing when a regime shift will occur may be overcome as we discover more about the mechanisms that affect the decadal-scale trends in the rotational velocity of the solid earth which is measured as the length of day (LOD).     

Mechanisms of mud extrusion on the Mediterranean Ridge Accretionary Complex

 Drilling two mud domes on the Mediterranean Ridge during ODP Leg 160 has demonstrated that the eruption of mud breccia began at least 1.5 Ma ago. An evolution through extrusive building of a cone, followed by successive eruptions of clast-bearing mud debris flows and subsequent subsidence can be deduced for both domes. Results from permeability and shear strength tests, grain size analyses, sedimentary textures, and clast provenance provide clues concerning the mechanism of mud volcanism. The collision of Africa with Eurasia resulted in backthrusting of the evaporite-dominated accretionary wedge against a rigid backstop. This allowed egress of overpressured fluid-rich mud of presumed Messinian age from the décollement, although many of the clasts may have originated from the overlying accretionary wedge.     

Late Quaternary Seismic Stratigraphy of the Eastern Bengal Shelf

An ultra-high-resolution seismic study of the eastern Bengal Shelf with the parametric narrow-beam echosounder Parasound allows the interpretation of late Quaternary depositional patterns in terms of seismic stratigraphy. Accommodation space was still present on the outer shelf during the last lowstand, where a prograding delta developed in the western survey area. Oolitic beach ridges were later formed on top of this lowstand delta. Farther east, large parts of the shelf were exposed to subaerial erosion and a river system extended seaward across the area. A subaqueous highstand delta prograded southwards following the maximum transgression about 7,000 years ago. Its foreset beds exhibit acoustic voids very likely generated by sediment liquefaction, possibly caused by episodic energetic events such as major cyclones and/or earthquakes. Bottomset sediments extend seaward close to the shelf break in the west, whereas no Holocene sediments cover the outer shelf in the east.     

Tectonic setting of the Azores Plateau deduced from a OBS survey

The studies of Azores seismicity generally show shocks with either normal faulting or right-lateral strike-slip along the ESE direction, compatible with a eastward relative motion of the Eurasian (EU) relative to the African (AF) plate. However, the 1 January 1980 earthquake was interpreted as a clear left-lateral strike-slip shock along the N150E direction. This pattern is difficult to explain in terms of the relative motion between the EU, AF and North American (NA) plates: all available models for the present day movement of this triple junction fail to explain the regional variability in the stress conditions of the area. Here we present data from a 34-day long Ocean Bottom Seismograph array deployment. We show that the seismicity is distributed along a band aligned with the island chain itself, and is concentrated along several faults with an approximate N150E strike, cutting the Azores plateau in all the area covered by the OBS network. The combination of these new results with other geophysical data permits us to conclude that the tectonic setting of the Azores plateau is characterised by the existence of two sets of faults, in the N120E and N150E directions, defining several crustal blocks, whose relative motion accommodates the interaction of the three megaplates. The deformation of these tectonic blocks is probably driven by the shear between the EU and AF plates. This model explains well the spatial variability of the stress conditions in the Azores domain, the combination of dextral and sinistral strike slip mechanisms and the observed seismotectonics of the Azores islands.     

Optimal Processing of Marine High-Resolution Seismic Reflection (Chirp) Data

Chirp frequency-modulated (FM) systems offer deterministic, repeatable source-signatures for high-resolution, normal incidence marine seismic reflection data acquisition. An optimal processing sequence for uncorrelated Chirp data is presented to demonstrate the applicability of some conventional seismic reflection algorithms to high-resolution data sets, and to emphasise the importance of a known source-signature. An improvement of greater than 60dB in the signal- to-noise ratio is realised from correlating the FM reflection data with the transmitted pulse. Interpretability of ringy deconvolved data is enhanced by the calculation of instantaneous amplitudes. The signal-to-noise ratio and lateral reflector continuity are both improved by the application of predictive filters whose effectiveness are aided by the repeatability of the Chirp source.     

Ecological and Life History Characteristics of Botryllus schlosseri Tunicata Populations Inhabiting Undersurface Shallow-Water Stones

Abstract. Populations of Botryllus schlosseri PALLAS 1772. a cosmopolitan colonial ascidian. were examined on the undersurface of stones for the first time in three adjoining localities along the Israeli Mediterranean coast. A two-year study of 1589 stones which were inhabited by 1345 colonies, revealed that colony coverage was < 1.5 % of the total available substrate area; values were highest in spring, lowest in winter. The two years differed significantly in the number of colonies · m ², and these numbers were correlated with mean seawater temperatures. Most of the stones contained 1–5 Botryllus colonies year-round; no significant correlation was found between number and stone size. The brown morph was dominant 80 % at all three localities. The distribution of other colour morphs differed between localities. Reproductive colonies were either hermaphroditic or contained male gonads only. Peak reproduction was in the spring, but did not correlate with seawater temperatures. While colony size ranged between I and 1I55zooids, sexually mature colonies consisted of 171–273 zooids on the average, compared with 37–90 zooids for sterile colonies. The three populations differed significantly in several ecological and life history characteristics. This further confirmed past studies indicating that Botryllus populations are characteristically divided into local subpopulations exhibiting microgeographic differences in life history patterns. The results are compared with the accumulated data on other world-wide Botryllus populations residing in other habitats.     

Direct displacement measurements of submerged objects

The direct measurement of displacement time histories, obtained by tracking illuminated targets located on the exterior surface of submerged objects, has significant advantages for large-scale model tests. Many problems of interest require the simultaneous measurement of three-dimensional motions at several elevations on the same body or on several bodies in close proximity. Thus, optical tracking of targets in air or water or some combination of the two required the development of a general analytical formulation capable of converting local data measured from multiple camera locations to a global coordinate system for further analysis. The formulation presented is quite general and allows one to study the displacement behavior of single or multiple targets located on the same object or on different moving objects. As part of the analysis, calibration issues, possible sources of error and the optimal choice of camera location are discussed in detail. Data obtained from a large-scale model test of deepwater platform TLP tendons subjected to random design seas is used to illustrate the methodology. In the example, four different cameras were used to record the tendon displacements. To illustrate the methodology, five different camera combinations were used to compute the target location. The results indicate that the formulation is quite robust and that, although only a two-camera system is required to resolve the three-dimensional global coordinates of a single target, the use of a third camera can enhance the accuracy of the results. Guidelines for using cameras to track target motion were developed and are presented.