Relationships among volcanic and hydrothermal activity and faults from the Shunnan 3-D well zone in the Tadong Area (Tarim Basin,China)

Tarim Basin distributed widely two stages of Permian volcanic rocks. However, the location and timing of these rocks pinching out and the relationship between Ordovician carbonate hydrothermal reservoirs and fault activity remain unclear. The Shunnan (Shunnan here in after referred to as SN) 1 3-D well zone in the eastern Tarim Basin contains volcanic rocks, and the Ordovician layer contains a hydrothermal reservoir. This paper describes the lithology, stage, volcanic rock distribution, crater position and deposition pinch-out line of volcanic rocks based on drilling and 3-D seismic data. The Permian strata in the well zone contain only one stage of Kupkuciman Formation basalt and tuff, the Kaipeleicike Formation contains terrigenous clastic rock and the adjacent volcanic rocks of wells SN2 and GL (Gulong here in after referred to as GL) 2 exhibit an absence of deposition. Although the craters are distributed on both sides of the NNW faults that cross well SN4, their positions are also controlled by the intersection of earlier NEE and NW faults and later NNE faults. Furthermore, the Ordovician strata in the SN1 well zone developed abundant tubular high-amplitude anomalies and tabular high-amplitude anomalies via hydrothermal corrosion, and the anomaly distributions are similar to the positions of the craters, which are controlled by the intersection of multi-group faults and the density of the faults.     

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。     

Effects of Wave–Current Interaction on Salt Intrusion During a Typhoon Event in a Highly Stratified Estuary

Wave–current interaction (WCI) is important in modulating hydrodynamics and water mixing in estuaries, and thereby the transport of water-borne materials. However, the effects of WCI on salt transport and salt intrusion in estuaries during storm events have been rarely examined. In the present study, we use a coupled atmosphere–ocean–wave–sediment transport (COAWST) modeling system to investigate the effects of WCI on salt intrusion in the highly stratified Modaomen Estuary during Typhoon Hagupit (2008). The model is validated by the measured wave, water elevation, and surface salinity data, and several diagnostic model experiments are conducted. WCI increases the storm surge by 0.8 m at the peak surge (25% of the total surge height). The wave-breaking-induced momentum flux and the Stokes drift increase the magnitude of the landward flow by 0.3 m s^?1 (30% of the total landward flow). In addition, the waves increase water mixing by 2–4 times compared with that without waves. Hence, WCI significantly increases the landward advective salt transport and decreases the steady shear transport. The net effect of the WCI is a significant increase of salt import and salt intrusion during the typhoon event. However, in the aftermath of the storm, the imported salt water is rapidly flushed out by the increased river discharge, and the estuary regains its stratification within one day.     

Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches

In mountainous areas, channelized rock avalanches swarm downslope leading to large impact forces on building structures in residential areas. Arrays of rock avalanche baffles are usually installed in front of rigid barriers to attenuate the flow energy of rock avalanches. However, previous studies have not sufficiently addressed the mechanisms of interaction between the rock avalanches and baffles. In addition, empirical design approaches such as debris flow (Tang et al., Quat Int 250:63–73, 2012), rockfall (Spang and Rautenstrauch, 1237–1243, 1988), snow avalanches (Favier et al., 14:3–15, 2012), and rock avalanches (Manzella and Labiouse, Landslides 10:23–36, 2013), which are applied in natural geo-disasters mitigation cannot met construction requirements. This study presents details of numerical modeling using the discrete element method (DEM) to investigate the effect of the configuration of baffles (number and spacing of baffle columns and rows) on the impact force that rock avalanches exert on baffles. The numerical modeling is firstly conducted to provide insights into the flow interaction between rock avalanches and an array of baffles. Then, a modeling analysis is made to investigate the change pattern of the impact force with respect to baffle configurations. The results demonstrate that three crucial influencing factors (baffle row numbers, baffle column spacing, and baffle row spacing) have close relationship with energy dissipation of baffles. Interestingly, it is found that capacity of energy dissipation of baffles increases with increasing baffle row numbers and baffle row spacing, while it decreases with increasing baffle column spacing. The results obtained from this study are useful for facilitating design of baffles against rock avalanches.     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.     

Ion chemistry of groundwater and the possible controls within Lhasa River Basin,SW Tibetan Plateau

In order to study the major ion chemistry and controls of groundwater, 65 groundwater samples were collected and their major ions measured from wells within Lhasa River Basin. Groundwater has the characteristics of slightly alkaline and moderate total dissolved solid (TDS). TDS concentration ranged from 122.0 to 489.9 mg/L with a median value of 271.2 mg/L. Almost all the groundwater samples suited for drinking and irrigation. The major cations of groundwater are Ca²⁺ and Mg²⁺, accounting for 59.6 and 31.3% of the cations, respectively. Meanwhile, HCO₃^? and SO₄^2? constituted about 56.7 and 36.9% of the anions, respectively, in Lhasa River Basin. The hydrochemical type of groundwater is HCO₃-SO₄-Ca-Mg. The chemical composition of groundwater samples located in the middle of Gibbs model, which indicates that the major chemical process of groundwater is controlled by rock weathering. Carbonate weathering was the dominant hydro-geochemical process controlling the concentration of major ions in groundwater within Lhasa River Basin, but silicate weathering also plays an important role.     

铀矿勘查中MT数据提取极化信息可行性研究

铀矿勘查中大地电磁测深法(以下简称MT法)的应用十分广泛,而频率域电磁勘探中激电效应切实存在。激电参数作为反映岩、矿石电化学性质的参数,在地质解译过程中常常被认为是金属硫化物的局部富集。为了充分利用铀矿床MT数据辅助地质解译,需要从中提取具有多属性特征的激电参数,能否成功提取该参数一直以来备受关注。文章从激电异常识别和二维反演试算两方面来论述成功提取的可行性。结果表明,仪器能够采集到含矿岩体所产生的激电异常,反演试算结果能够还原理论模型的地下空间展布情况。从而论证了从铀矿床MT数据中提取极化率是可行的。