Sedimentology of Quaternary perched springline and paludal tufas: criteria for recognition, with examples from Guadalajara Province, Spain

Outcrop‐scale geometries and bed relationships of ambient temperature freshwater carbonates are poorly understood because many described tufas have been dismantled by erosion and present only part of a particular depositional model. At the field scale, four end‐member models encompass the tufa continuum: (1) perched springline; (2) paludal; (3) fluvial; and (4) lacustrine tufas. Individual bed types can occur with variable dominance within several of these models, but one or more beds are characteristically dominant only within a single tufa model, so it can be differentiated from relatively isolated outcrop fragments. Two models (perched springline tufas and paludal tufas) are known in outline only in the literature despite being present within the Quaternary deposits of most karstic regions. Perched springline tufas generally form lobate, fan‐shaped mound morphologies on hillslopes and develop from single or multiple spring resurgences. Mature deposits show a subhorizontal top and a steep face on the downflow side. The steep outer zones of tufa mounds may be developed into cascades with moss curtains or can be dominated by shallow rimstone pools according to face angle. Tufa deposits lying downslope of the mounds are usually detrital in nature, especially if some dismantling of the mound has occurred. The relatively thin subhorizontal lobe‐top deposits commonly contain organic‐rich deposits. Paludal tufas develop predominantly in waterlogged valley bottom situations, where line‐sourced waters emerge from valley side and bottom aquifers. Lime mud precipitation predominates in these sites. Mud is deposited as subhorizontal laminites that thin towards the valley axis and downstream of resurgences. Tufa spring‐mounds may form where lesser volumes of water are involved. Individual tussocks (phytoherm cushions) of grasses and rushes are the most diagnostic feature of the model, but sapropels and peats may be intercalated. Diagenesis in both models is rapid. Lithification of individual beds is virtually instantaneous and always occurs before the decay of the associated living vegetation. The resulting highly porous and permeable fabrics remain fresh in Holocene tufas, but aggrading neomorphism and partial spar infill of vegetation moulds is common in older deposits. Dissolution in many perched springline tufas is small scale. Many large cavities are primary, but with later coatings of speleothems. Early removal of organics from paludal tufas is responsible for autobrecciation and differential compaction.     

Geothermometry, geochronology, and mass transfer associated with hydrothermal alteration of a rhyolitic hyaloclastite from Ponza Island, Italy

A rhyolitic hyaloclastite from Ponza Island, Italy, was hydrothermally altered, producing four distinct alteration zones based on X-ray diffraction mineralogy and field textures: (1) nonpervasive argillic zone; (2) propylitic zone; (3) silicic zone; and (4) sericitic zone. The unaltered hyaloclastite is volcanic breccia with clasts of vesiculated obsidian in a matrix of predominantly pumice lapilli. Incomplete alteration of the hyaloclastite resulted in the nonpervasive argillic zone, characterized by smectite and disordered opal-CT. The other three zones exhibit more complete alteration of the hyaloclastite. The propylitic zone is characterized by mixed-layer illite-smectite (I-S) with 10 to 85% I, mordenite, opal-C, and authigenic K-feldspar (akspar). The silicic zone is characterized by I-S with ≥90% I, pure illite, quartz, akspar, and occasional albite. The sericitic zone consists primarily of I-S with ≥66% I, pure illite, quartz, and minor akspar and pyrite. K/Ar dates of I-S indicate hydrothermal alteration occurred at 3.38 ± 0.08 Ma.Oxygen isotope compositions of I-S systematically decrease from zones 1 to 4. In the argillic zone, smectite has δ¹⁸O values of 21.7 to 22.0‰ and I-S from the propylitic, silicic, and sericitic zones ranges from 14.5 to 16.3‰, 12.5 to 14.0‰, and 8.6 to 11.9‰, respectively. δ¹⁸O values for quartz from the silicic and sericitic zones range from 12.6 to 15.9‰. By use of isotope fractionation equations and data from authigenic quartz-hosted primary fluid inclusions, alteration temperatures ranged from 50 to 65°C for the argillic zone, 85 to 125°C for the propylitic zone, 110 to 210°C for the silicic zone, and 145 to 225°C for the sericitic zone. Fluid inclusion data and calculated δ¹⁸O_water values indicate that hydrothermal fluids were seawater dominated.Mass-transfer calculations indicate that hydrothermal alteration proceeded in a relatively open chemical system and alteration in the sericitic zone involved the most extensive loss of chemical species, especially Si. Systematic gains in Mg occur in all alteration zones as a result of I-S clay mineral formation, and systematic losses of Na, Ca, and K occur in most zones. With the exception of Ca, calculations of mass transfer associated with hydrothermal alteration on Ponza agree with chemical fluxes observed in laboratory experiments involving hydrothermal reactions of rhyolite and seawater. The anomalous Ca loss at Ponza may be due to hydrothermal formation of anhydrite and later low-temperature dissolution. On the basis of Mg enrichments derived from circulating seawater, we estimate the following minimum water/rock ratios: 9, 3, 6, and 9 for the argillic, propylitic, silicic, and sericitic zones, respectively. Hydrothermal fluid pH for the propylitic and silicic zones was neutral to slightly basic and relatively acidic for the sericitic zone as a result of condensation of carbonic and perhaps other acids.     

Environmental influences on the demersal fish assemblages in the Sepetiba Bay, Brazil

The structure of the demersal fish assemblage in Sepetiba Bay, southeast Brazil (22°54′–23°04′S, 43°34′–44°10′W) was described and related to environmental variables. A 3-yr long trawl survey (from July 1993 to June 1996) was conducted using a stratified random sampling strategy at 158 stations. One hundred and seven species of fishes in 80 genera and 44 families were identified. Gerreidae and Ariidae made up 30.5% and 28.6%, and 19.8% and 28.1% of the total number and weight, respectively. Sciaenidae, Engraulididae, Sparidae, and Carangidae were other prominent families. Three assemblages existed in the bay: one inhabited shallow, less saline and less transparent water in the inner zone (depth <5 m, transparency <2 m, salinity <30 psu, and slightly higher temperature); another in the outer zone with the opposite situation (depth >10 m, transparency >3 m, salinity >30 psu, and slightly lower temperature); and a third assemblage in the middle zone likely to prefer average values or show no clear preferences. Most species decreased in abundance over the 3-yr period of study. No seasonal change was detected in the assemblage structure, but many species were rare, indicating high spatial and temporal patchiness. Canonical correlation analyses were used to describe and compare the fish assemblages in the three different habitats. The outer zone had the greatest number of species recorded, lowest abundance, highest diversity and evenness, and was comprised mainly byCynossion leiarchus, Prionotus punctatus, Anchoa tricolor, Haemulon steindachneri, Diplectrum radiale, Etropus crossotus, andSphoeroides greeleyi; the inner zone had the lowest number of species recorded but the greatest number of species per sample, highest abundance, lowest diversity and evenness, being comprised mainly byDiapterus rhombeus, Genidens genidens, Cathrops spixii, Chloroschombrus chrysurus, Sciadeichthyes luniscutis, Cetengraulis edentulus, andArchorsargus rhomboidalis; while the third group had the lowest number of species per sample, being comprised by species widely distributed asGerres aprion, G. genidens, Gerres gula, andMicropogonias furnieri. Depth, followed by transparency and salinity, were the primary factors influencing assemblage distribution.     

Electrical and Thermal Anomalies in the Central Andean Subduction Zone

—An enhancement of the electrical conductivity in the upper layers in the subduction zones of southern Peru and northern Argentina is found by analyzing the solar quiet geomagnetic variations. This feature appears in a zone associated with large subduction angles. In this region high values of heat flow have been measured, therefore a one-dimensional thermal model is proposed using regional characteristic parameters to reproduce these values. It is found that thermal convection necessarily plays a contributing role. This effect may be produced by the ascending magma and fluids, which can explain the enhancement of the electrical conductivity.     

Small-scale spatial variation of macrobenthic community structure

Examination of small-scale spatial variation in essential to understanding the relationships between environmental factors and benthic community structure in estuaries. A sampling experiment was performed in October 1993 to measure infauna association with sediment composition and salinity gradients in Nueces Bay, Texas, USA. The bay was partitioned into four salinity zones and three sediment types. Higher densities of macrofaua, were found in sediments with greater sand content and in areas with higher salinity. High diversity was also associated with high homogeneous salinity (31–33‰) and greater sand content. Macrofauna biomass and diversity were positively correlated with bottom salinity, porewater salinity, and bottom dissolved inorganic nitrogen (DIN). Furthermore, species dominance shifted along the estuarine gradient.Streblospio benedicti dominated at lower salinity, but,Mediomatsus ambiseta andMulinia lateralis were the dominant species at higher salinity. Statistical analyses revealed significant correlations for sediment characteristics (i.e., increased fine sediments, water content, and total organic carbon) with decreased total abundance and diversity. Increased salinity and DIN were correlated with increased total biomass, diversity, and macrofauma community structure. These physico-chemical variables are regulated by freshwater inflow, so inflow is an important factor influencing macrofauna community structure by indirectly influencing the physico-chemical environment.     

Use of sequential extraction procedure for assessing the environmental impact at regional scale of the São Domingos Mine (Iberian Pyrite Belt)

São Domingos is one of the most emblematic Portuguese mining districts in the Iberian Pyrite Belt (IPB). The beginning of mining exploitation in the area has been dated back to pre-Roman times, remaining in activity until 1966 when it was definitely halted. The intense mining labours are reflected in the presence of a huge amount of sulphide-mining wastes and downstream production of acid mine drainage (AMD). The mining wastes in the area are highly heterogeneous, and numerous different types may be recognized, including slags, iron oxides, smelting ashes, brittle and blocks of pyrite, leaching tank refuses, industrial landfill and other residues coming from ore extraction (gossan wastes and country rocks). The chemical speciation of potentially toxic elements (As, Cd, Cr, Cu, Fe, Mn, Pb, S, Sb and Zn) in all mine wastes from São Domingos was determined by modified BCR-sequential extraction procedure (European Community Bureau of Reference) and combined with the mass/volume proportions of each waste to quantify the potential risk of this mining district at regional scale. Analytical recoveries by sequential extraction, with respect to a pseudo-total metal content digestion, were generally acceptable (100 ± 17%). The oxidizable fraction corresponds with metals bound to sulphides and released easily under oxidizing conditions in AMD production processes. This is the most polluting fraction for the environment in this type of residues. Part of this fraction is retained by precipitation of soluble secondary minerals in warm periods, moving to the bio-available fraction that is dissolved in rainy periods. Just considering the bio-available fraction, all mine wastes from São Domingos may leach up to 172514 ton of Fe, 10564 ton of S, 6644 ton of Pb, 2610 ton of Zn, 1126 ton of Mn, 1032 ton of Cu, 183 ton of Cr, 109 ton of As, 34 ton of Sb and 0.9 ton of Cd. The process of precipitation and re-dissolution of efflorescent salts formed directly by oxidation of the oxidizable fraction is seasonally repeated, which causes an annual self-feeding and releasing of the bio-available fraction. Thus, the present study shows the pollutant potential of this IPB mining district and explains the spoiled state of the fluvial courses in the region.     

Genetic and metamorphic conditions constrained by fluid inclusions from Paleoproterozoic (c. 1.8 Ga) magnesite ore deposits, NE Brazil

Precambrian magnesite occurrences hosted by metadolomites from the Orós belt, Ceará, Brazil, are part of a greenschist–amphibolite, metavolcano-sedimentary terrain, dated at 1.8 Ga, cut by Meso- to Neoproterozoic Brasiliano granites and Neoproterozoic basic sills. These rocks were affected by a shear zone between 580 and 500 Ma. The magnesite-bearing marbles can be grouped as medium-grained (1–9 mm) at the Riacho Fundo ore deposit or sparry magnesite (1–15 cm) at the Cabeça de Negro ore deposit. The sparry magnesite shows textural characteristics related to original sedimentary structures. Both types of magnesite-bearing marbles contain aqueous and aqueous-carbonic fluid inclusions that yield homogenization temperatures between 170 and 370 °C. Applying a pressure correction, these temperatures are compatible with the evolution from greenschist to amphibolite facies metamorphic conditions, as described in previous work on the Orós region. It also agrees with data in specialized literature on the metamorphism of carbonate rocks. Fluid inclusion distribution, composition, and physical-chemical characteristics suggest temperature increase, probably related to metamorphism on these rocks. The medium-grained magnesite records partial contamination of CO₂-rich inclusions by relict carbonaceous material (bitumen, hydrocarbons?) that favors, but does not confirm, a syngenetic sedimentary origin and could have caused the lowering of CO₂ melting point in these inclusions. Therefore, though textural evidence points to a sedimentary-diagenetic model, fluid inclusions record conditions of a metamorphic event.     

A detailed pyrolysis-GC/MS analysis of a black carbon-rich acidic colluvial soil (Atlantic ranker) from NW Spain

Despite the potentially large contribution of black carbon (BC) to the recalcitrant soil organic matter pool, the molecular-level composition of aged BC has hardly been investigated. Pyrolysis-GC/MS, which provides structural information on complex mixtures of organic matter, was applied to the NaOH-extractable organic matter of an acidic colluvial soil (Atlantic ranker) sampled with high resolution (5 cm) that harbours a fire record of at least 8.5 ka. Additionally, 5 charcoal samples from selected soil layers were characterised using pyrolysis-GC/MS for comparison. Pyrolysis-GC/MS allowed distinguishing between BC and non-charred organic matter. It is argued that a large proportion of the polycyclic aromatic hydrocarbons (PAHs), benzenes and benzonitrile in the pyrolysates of the extractable organic matter, together accounting for 21–54% of total identified peak area, derived from BC. In charcoal samples, these compounds accounted for 60–98% of the pyrolysis products. The large quantity of BC in almost all samples suggested a key role of fire in Holocene soil evolution. The high C content of the soil (up to 136 g C kg⁻¹ soil) may be attributed to the presence of recalcitrant organic C as BC, in addition to the sorptive preservation processes traditionally held responsible for long-term C storage in acid soils. Interactions between reactive Al hydroxides and BC could explain the longevity of BC in the soil. This work is the first thorough pyrolysis-GC/MS based study on ancient fire-affected organic matter.     

Geomorphology and landslide susceptibility assessment using GIS and bivariate statistics: a case study in southern Italy

In this article, the results of a study aimed to assess the landslide susceptibility in the Calaggio Torrent basin (Campanian Apennines, southern Italy) are presented. The landslide susceptibility has been assessed using two bivariate-statistics-based methods in a GIS environment. In the first method, widely used in the existing literature, weighting values (Wi) have been calculated for each class of the selected causal factors (lithology, land-use, slope angle and aspect) taking into account the landslide density (detachment zones + landslide body) within each class. In the second method, which is a modification of the first method, only the landslide detachment zone (LDZ) density has been taken into account to calculate the weighting values. This latter method is probably characterized by a major geomorphological coherence. In fact, differently from the landslide bodies, LDZ must necessarily occur in geoenvironmental classes prone to failure. Thus, the calculated Wi seem to be more reliable in estimating the propensity of a given class to generate failure. The thematic maps have been reclassified on the basis of the calculated Wi and then overlaid, with the purpose to produce landslide susceptibility maps. The used methods converge both in indicating that most part of the study area is characterized by a high–very high landslide susceptibility and in the location and extent of the low-susceptible areas. However, an increase of both the high–very high and moderate–high susceptible areas occurs in using the second method. Both the produced susceptibility maps have been compared with the geomorphological map, highlighting an excellent coherence which is higher using method-2. In both methods, the percentage of each susceptibility class affected by landslides increases with the degree of susceptibility, as expected. However, the percentage at issue in the lowest susceptibility class obtained using method-2, even if low, is higher than that obtained using method-1. This suggests that method-2, notwithstanding its major geomorphological coherence, probably still needs further refinements.