The geology of the 2nd century A.D. Amphitheater Area of Catania,Italy: Historical Eruptions Affecting the Urban District

The amphitheater of Catania is one of the main architectural structures built during Roman domination of the town. It was constructed in two successive phases between the 1st and 2nd centuries A.D. and fell into disuse from the second half of the 4th century. Detailed geological and petrographic investigations allow better geomorphological reconstruction of the area where the monument was built. In particular, the western and eastern portions of the amphitheater are built on prehistoric lava flows, named Barriera del Bosco and Larmisi, respectively. We infer that the choice of site to build the monument was highly influenced by the morphological setting of the area. In fact, the location at the contact between two lava flow fields facilitated excavation and removal of rocks due to the incoherence of the scoriaceous lateral border of the lava flows. Integrating both archaeological and geological data has revealed that a large number of Neolithic, Greek, and Roman sites are located in the lava fields of Barriera del Bosco and Larmisi within the present urban district of Catania, indicating that during its long history the city was directly impacted by only one lava flow, namely in A.D. 1669.     

Linking Palaeozoic palaeogeography of the Betic Cordillera to the Variscan Iberian Massif: new insight through the first conodonts of the Nevado-Filábride Complex

International Journal of Earth Sciences - Graphite-rich metamorphic limestones included within low-grade black schists of the lowest Nevado-Filábride tectonic unit in the Sierra de Baza...     

Radiological characterization of granitoid outcrops and dimension stones of the Variscan Corsica-Sardinia Batholith

This study focuses on the radiological characterization of granitoid outcrops and dimension stones using in situ gamma-ray spectrometry. Extensive measurements were performed on 210 granitoid outcrops of the Corsica-Sardinia Batholith. The large statistical sample allowed us to improve the analysis by considering a log-normal distribution of radioelements and propagating the uncertainties using Monte Carlo method. The activity concentrations of ⁴⁰K, ²²⁶Ra (²³⁸U) and ²³²Th in C-SB area were 1,177 _?304 ⁺⁴⁰⁸ , 60 _?23 ⁺³⁶ and 69 _?25 ⁺³⁸  Bq/kg (at 1σ uncertainty). The median abundance of K, U and Th on the Variscan C-SB was higher than the average values of the upper continental crust and was comparable with Variscan belt. This corresponds to an outdoor absorbed dose rate of 124 _?26 ⁺³³  nGy/h at 1σ uncertainty which is 3σ higher than the population-weighted average absorbed dose rate (60 nGy/h). Seven commercial granites (Rosa Beta, Ghiandone, Giallo San Giacomo, Rosa Cinzia, Grigio Malaga, Bianco Sardo and Grigio Perla) were investigated to characterize their radiological hazard through 147 measurements taken in 73 extractive quarries. All of the commercial granites were categorized as A2 material based on their activity concentration indices, excluding (at the 3σ level) any restriction on their utilization as superficial materials. Rosa Beta, Grigio Malaga, Grigio Perla and Bianco Sardo can also be used as bulk materials as they can be included in the A1 category. In the case of Ghiandone, Giallo San Giacomo and Rosa Cinzia, we are confident of an A1 classification only at the 1σ level.     

Thermal Conductivity of Argillaceous Rocks: Determination Methodology Using In Situ Heating Tests

This study focuses on the characterisation of thermal conductivity for three potential host rocks for radioactive waste disposal. First, the heat conduction process is reviewed on the basis of an analytical solution and key aspects related to anisotropic conduction are discussed. Then the existing information on the three rocks is summarised and a broad uncertainty range of thermal conductivity is estimated based on the mineralogical composition. Procedures to backanalyse the thermal conductivity on the basis of in situ heating tests are assessed and a methodology is put forward. Finally, this methodology is used to estimate the impact of experimental uncertainties and applied to the four in situ heating tests. In the three potential host rocks, a clear influence of the bedding planes was identified and anisotropic heat conduction was shown to be necessary to interpret the observed temperature field. Experimental uncertainties were also shown to induce a larger uncertainty on the anisotropy ratio than on the equivalent thermal conductivity defined as the geometric mean of the thermal conductivity in the three principal directions.     

The effect of deformation on the TitaniQ geothermobarometer: an experimental study

We performed high strain (up to 47 %) axial compression experiments on natural quartz single crystals with added rutile powder (TiO₂) and ~0.2 wt% H₂O to investigate the effects of deformation on the titanium-in-quartz (TitaniQ) geothermobarometer. One of the objectives was to study the relationships between different deformation mechanisms and incorporation of Ti into recrystallized quartz grains. Experiments were performed in a Griggs-type solid-medium deformation apparatus at confining pressures of 1.0–1.5 GPa and temperatures of 800–1,000 °C, at constant strain rates of 1 × 10^?6 or 1 × 10^?7 s^?1. Mobility of Ti in the fluid phase and saturation of rutile at grain boundaries during the deformation experiments are indicated by precipitation of secondary rutile in cracks and along the grain boundaries of newly recrystallized quartz grains. Microstructural analysis by light and scanning electron microscopy (the latter including electron backscatter diffraction mapping of grain misorientations) shows that the strongly deformed quartz single crystals contain a wide variety of deformation microstructures and shows evidence for subgrain rotation (SGR) and grain boundary migration recrystallization (GBMR). In addition, substantial grain growth occurred in annealing experiments after deformation. The GBMR and grain growth are evidence of moving grain boundaries, a microstructure favored by high temperatures. Electron microprobe analysis shows no significant increase in Ti content in recrystallized quartz grains formed by SGR or by GBMR, nor in grains grown by annealing. This result indicates that neither SGR nor moving grain boundaries during GBMR and grain growth are adequate processes to facilitate re-equilibration of the Ti content in experimentally deformed quartz crystals at the investigated conditions. More generally, our results suggest that exchange of Ti in quartz at low H₂O contents (which may be realistic for natural deformation conditions) is still not fully understood. Thus, the application of the TitaniQ geothermobarometer to deformed metamorphic rocks at low fluid contents may not be as straightforward as previously thought and requires further research.     

Halogen-dominant mineralization at Mt. Calvario dome (Mt. Etna) as a response of volatile flushing into the magma plumbing system

The exceptional occurrence of fluorine-rich mineral phases in the benmoreitic lava dome of Mt. Calvario (south-western flank of Mt. Etna) has given the opportunity to understand the genetic process allowing their crystallization. Both primary and secondary mineral associations were found, namely: plagioclase, clinopyroxene, olivine, fluorapatite and iron oxides as primary assemblage, whereas fluoro-edenite and fluorophlogopite, ferroan-enstatite, hematite, pseudobrookite and tridymite as secondary mineralization. In addition to some major and trace elements (e.g., Fe, Ti, Na, K, P, Ba, Rb, Sm, Zr), particularly fluorine and chlorine concentrations of the whole rock are significantly higher than other Etnean prehistoric benmoreites, and cannot be accounted for common differentiation processes in the feeding system. The selective enrichment in some elements has been here attributed to volatile flushing occurring in the plumbing system, with fluid/melt ratio of ~0.65:1. The resulting high amount of fluorine, coupled with its high solubility even at low pressure for benmoreitic melts, finally led to nucleation and growth of F-rich mineral phases during syn- and post-eruptive conditions.     

Thermal re-emission effects on GPS satellites

Highly precise satellite-derived coordinates depend on accurate orbit predictions, which cannot be achieved with purely empirical models. Global positioning system (GPS) satellites undergo several periodic perturbing forces that have to be modeled and understood. In this scenario, small non-gravitational forces can no longer be neglected when the purpose of the orbital analysis is to obtain accurate results (Vilhena de Moraes 1994). Together with solar radiation pressure, thermal re-emission effects due to solar heating and Earth albedo are the two most important non-gravitational effects. While solar radiation pressure is widely understood, our knowledge about thermal re-emission effects on GPS satellites is in its infancy. Few models have been proposed in recent years and despite the interest of the scientific community, there is a lack of detailed results concerning the magnitude and the behavior of such forces. The aim of this work is to provide a thermal re-emission force model for GPS satellites, simple enough to minimize the problem of modeling a satellite of complex shape with several components on its surface, but accurate enough to provide an estimate of the magnitude and the behavior of these forces, as well as to provide some input to the present knowledge about photon thrust on GPS satellites. Some results of this work point to the fact that thermal re-emission effects are good candidates to partially explain the Y-bias for GPS satellites.     

Combined effects of groundwater and aeolian processes in the formation of the northernmost closed saline depressions of Europe: north-east Spain

A genetic and evolutionary model is established for saline depressions in continental areas. These depressions are located in arid or subarid areas, and are developed on low permeability geological mediums (K<10 mm/day) with a lack of streams reaching the small lakes. The phenomenon of evaporation is fundamental, since it is the basic requirement for the presence or absence of a free water surface in the lake, and also for depression of the phreatic surface, which causes inflow of groundwater towards the lake. With these conditions, the proposed model includes the following stages: (i) initiation of the close depression; (ii) deepening of the depression; (iii) formation of the lake basin and the end of the deepening; and (iv) levelling and lateral extension of the lake basin. The combined effects of groundwater flows and aeolian action offer a coherent explanation for the origin and evolution both of the closed depressions found in the Ebro Valley, and of the salt lakes that subsequently form. The processes described form morphologies of oval shape with the main axis parallel to the direction of the wind, flat floors and evaporitic sedimentation, although they act on geological materials with different lithologies. © 1998 John Wiley & Sons, Ltd.     

Taxonomic distinctness in Mediterranean marine nematodes and its relevance for environmental impact assessment

Taxonomic distinctness has been applied successfully for the exploration of biodiversity patterns, yet its relevance in environmental impact assessment is far from being unquestioned. In this study, we assessed the potential of taxonomic distinctness to discern perturbed and unperturbed sites by analysing Mediterranean nematode assemblages. Geographic and habitat-related effects on the performance of the index were also explored. Above all, our findings do not corroborate the conjecture that taxonomic distinctness could be largely unaffected by natural variability, habitat features, and biogeographic context, casting doubts on potential generalization concerning its application as an indicator of environmental stress. Taxonomic distinctness represents an excellent metric to identifying taxonomic properties of ecological systems but, as for other ecological indices, it should be viewed as a complementary tool in environmental impact assessment, due to its sensitiveness to specific environmental features of systems being investigated.