CO2 dilution in the lower atmosphere from temperature and wind speed profiles

Temperature and wind speed profiles obtained from 3?years of radio acoustic sounding system sodar measurements at a rural site in the northern Spanish plateau were fitted to polynomial functions. Depending on the extrema of these fits, several groups of profiles were considered. Daily evolution of temperature profiles corresponded to the lower boundary layer evolution. However, wind speed profiles revealed a frequent low-level jet during the whole day. CO₂ surface concentrations were analysed, and surface CO₂ dilution was also considered by selection of thin canopies with variable depth, resulting in dilution rates of 7 and 18?ppm when the layer increased 100?m for the 95th percentile and temperature and wind speed profiles, respectively.     

Fluoride Biomonitoring around a Large Aluminium Smelter Using Foliage from Different Tree Species

In order to study the pollution gradient in the vicinity of a large aluminium production facility in Patagonia (Argentina), a passive biomonitoring was performed employing foliage from three tree species. Primary scope was to identify pollution gradients and to select suitable tree species which can be used as biomonitor plants in the study area. Therefore, leaves of Eucalyptus rostrata, Populus hybridus and different needle ages of Pinus radiata were collected at different distances from the industry and the fluoride concentration was analysed in washed and unwashed samples in order to determine the amount of external fluoride. Washing reduced the F‐concentrations by 24, 39 and 51% on average in E. rostrata, P. hybridus and P. radiata, respectively, indicating that species‐specific characteristics determine the accumulation and wash‐off of dust‐associated fluorine. F‐concentrations varied from 6 to 3652 ppm F in unwashed samples indicating a steep pollution gradient in the study area. The influence of F‐emissions was discernible in all samples up to a distance of 3500 m from the smelter. E. rostrata accumulated more fluorine than the other species at equal distance from the emission source. The present study confirms that aluminium smelting results in high F deposition in the study area. Establishing a biomonitor network around large emitters is suitable and feasible to evaluate the efficiency of air control measures.     

Seismic risk mitigation technique for art objects: experimental evaluation and numerical modelling of double concave curved surface sliders

The opportunity and the advantages of applying base isolation technologies developed for civil structures to small objects are investigated and some considerations related to the scale effects are discussed. A series of experimental tests carried out at SRMD facility in San Diego are presented with the aim to investigate the dynamic response of a system designed to simulate a sculpture isolated by means of Double Concave Curved Surface Sliders. Such devices are specifically re-designed to fit the peculiar situation of light weight objects. In particular the samples used in the experimentation are designed with geometric and inertia characteristics fit for representing the Michelangelo’s sculptures exposed at the “Galleria dell’Accademia” in Florence, Italy. Finally, the main aspects concerning the numerical simulation of the seismic response of the proposed isolated system are discussed, also to investigate the efficiency of the existing numerical models, which are developed for traditional devices, when they are applied on such small and particular objects. The results of the experimental/numerical campaign show a general efficiency of the isolation system in terms of limiting the transferred action. Further study is needed to understand more clearly some local unexpected phenomena emerged from the experimental tests.     

Seismostratigraphic analysis with centennial to decadal time resolution of the sediment sink in the Ganges-Brahmaputra subaqueous delta

The deltas of large rivers have become the focus of many research studies due to their vulnerability in times of expected sea level rise. One major delta in peril is the Ganges-Brahmaputra Delta (Bangladesh) due to its low elevation and high subsidence rate. In this study, high-resolution seismic and sediment echosounder data of the subaqueous part of the delta are analyzed by an integrated seismo-acoustic stratigraphic approach.Transparent Units (TUs) are the most prominent, continuously traceable architectural elements within the sigmoidal clinoform. TUs consist of homogenized sediments and are interpreted to be formed by liquefaction flows generated by subduction-related earthquakes of the nearby plate-boundary. The uppermost TUs are related to the historical well known major earthquakes which occurred in 1762, 1897 and 1950. Using the TUs as time marks the mean annual storage rates for the intervals could be assessed. A direct comparison of echosounder data gathered in 1994, 1997 and 2006 is used as another method to estimate the last decade mean annual storage rate.In general, the averaged decadal to centennial mean annual storage rates in the foreset beds have significantly decreased within the last ∼300 years from 22% to 18% and down to 13.8% of the present total annual fluviatile suspension supply to the delta (10⁹ t a⁻¹). This decrease, however, is not evenly distributed along the foreset beds. In the western clinoform mean annual storage rates slightly decreased during the last ∼300 years, whereas in the eastern clinoform the mean annual storage rate of the last decade is one-third of the initial value in the late eighteenth century.The variation of clinoform slope angles generally coincides with the local accumulation rates but a variable degree of asymmetry gives some new insights in the future trend of the subaqueous delta development. The sink of sediment in the western clinoform depocentre landward of the inflection point, where shape changes from convex to concave, is producing an increase in concavity.The decline in monsoon precipitation over the last centuries is assumed to have significantly contributed to the decreased mean annual storage rate in the eastern clinoform where the convexity of the clinoform increases seaward of the inflection point. It is very likely that the whole depocentre of the fluvial sediment load is shifting toward the western subaqueous delta and to the Swatch of No Ground Canyon and, thereby, increasing the export to the deep-sea fan.     

Mineralogical and geochemical spatial analyses of a waste-rock dump at the Libiola Fe–Cu sulphide mine (Eastern Liguria,Italy)

In this work, we investigated a 3 ha sulphide-bearing waste-rock dump (Libiola Mine, Italy) using mineralogical, geochemical, and geostatistical analyses. The dumped materials were highly heterogeneous in grain size and lithology and varied both laterally and vertically. Other than the host rock of the ore, basalts and serpentinites, the dumped materials contained high amounts of low-grade chalcopyrite- and pyrite-rich mineralisations. Due to these characteristics and to the absence of minerals able to neutralise acidity, this waste-rock dump can be classified as an acid mine drainage (AMD) producer. The study confirms that AMD is still active and, in the best scenario, can persist for up to 6.17 × 10³ years. The consequences of this process are of serious environmental concern as it involves strong acidification of the circulating waters, the release of potentially toxic metals into the soil, streams and rivers and the precipitation of huge quantities of secondary Fe-oxides and Fe-oxyhydroxides.     

Study of an unexpected convective storm

The occurrence of a severe storm in the Argentine littoral has been analyzed. Although general atmospheric conditions were not favorable to the development of deep convection, this storm produced strong winds and hail of considerable intensity. Its occurrence was associated with the entrance of a pulse of humid air at low levels and could be related to the development of two vorticity centers in the region. Atmospheric conditions existing above a low-level inversion are used to simulate two possible clouds, with base altitudes at 2200 and 3000 m and updraft speeds reaching maximum values of 27 and 29 m s⁻¹ respectively. It is noted that the base temperature of about 13°C, found for the first cloud, can be correlated with the prevalence of frozen drop embryos, observed in an analyzed hailstone sample. Hailstone vertical trajectories are simulated in both modeled clouds, assuming spheroidal and spherical particles and assigning different values to the drag coefficient C_d.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

Relict sand dredging for beach nourishment in the central Tyrrhenian Sea (Italy): effects on benthic assemblages

The aim of this study is to analyse the effects in space and time of relict sand-dredging activities on macrobenthic assemblages, in an area situated offshore Montalto di Castro (central Tyrrhenian Sea, Italy), and to analyse the recolonisation processes of macrobenthos in the dredged areas. The area in question is characterised by relict sand deposits (Holocenic paleo-beaches), used for beach nourishment along the Latium coast. The effects of sand extraction on benthic assemblages were investigated before, during and after three dredging operations. The sites analysed are located within the dredged areas (inside stations) and in neighbouring, not dredged, areas (outside stations). The results showed that the impact of sand extraction was confined to the dredged stations and to the areas in proximity to the dredged areas. During dredging activities, the structure of benthic assemblages within the impacted stations was characterised by low species richness and diversity. Both the direct removal of sediment and the re-suspension and consequent deposition of fine sediment affected benthic assemblages of the impacted stations. A few months after the dredgings, a recolonisation process was still observed at all the impacted stations. A gradual recolonisation process was observed at those stations affected by only one dredging, whereas a different recolonisation was observed at those stations affected by two dredgings over time. This study suggests that differences of re-colonisation processes of benthic assemblages are related to the intensity of dredging operations in terms of dredging frequency.