An approach to the radiometric aerotriangulation of photogrammetric images

Harnessing the radiometric information provided by photogrammetric flights could be useful in increasing the thematic applications of aerial images. The aim of this paper is to improve relative and absolute homogenization in aerial images by applying atmospheric correction and treatment of bidirectional effects. We propose combining remote sensing methodologies based on radiative transfer models and photogrammetry models, taking into account the three-dimensional geometry of the images (external orientation and Digital Elevation Model). The photogrammetric flight was done with a Z/I Digital Mapping Camera (DMC) with a Ground Sample Distance (GSD) of 45 cm. Spectral field data were acquired by defining radiometric control points in order to apply atmospheric correction models, obtaining calibration parameters from the camera and surface reflectance images. Kernel-driven models were applied to correct the anisotropy caused by the bidirectional reflectance distribution function (BRDF) of surfaces viewed under large observation angles with constant illumination, using the overlapping area between images and the establishment of radiometric tie points. Two case studies were used: 8-bit images with applied Lookup Tables (LUTs) resulting from the conventional photogrammetric workflow for BRDF studies and original 12-bit images (Low Resolution Color, LRC) for the correction of atmospheric and bidirectional effects. The proposed methodology shows promising results in the different phases of the process. The geometric kernel that shows the best performance is the Lidense kernel. The homogenization factor in 8-bit images ranged from 6% to 25% relative to the range of digital numbers (0–255), and from 18% to 35% relative to levels of reflectance (0–100) in the 12-bit images, representing a relative improvement of approximately 1–30%, depending on the band analyzed.     

A κ Model for Mainland France

An important parameter for the characterization of strong ground motion at high-frequencies (>1 Hz) is kappa, κ, which models a linear decay of the acceleration spectrum, a(f), in log-linear space (i.e. a(f) = A ₀ exp(? π κ f) for f > f _E where f is frequency, f _E is a low frequency limit and A ₀ controls the amplitude of the spectrum). κ is a key input parameter in the stochastic method for the simulation of strong ground motion, which is particularly useful for areas with insufficient strong-motion data to enable the derivation of robust empirical ground motion prediction equations, such as mainland France. Numerous studies using strong-motion data from western North America (WNA) (an active tectonic region where surface rock is predominantly soft) and eastern North America (ENA) (a stable continental region where surface rock is predominantly very hard) have demonstrated that κ varies with region and surface geology, with WNA rock sites having a κ of about 0.04 s and ENA rock sites having a κ of about 0.006 s. Lower κs are one reason why high-frequency strong ground motions in stable regions are generally higher than in active regions for the same magnitude and distance. Few, if any, estimates of κs for French sites have been published. Therefore, the purpose of this study is to estimate κ using data recorded by the French national strong-motion network (RAP) for various sites in different regions of mainland France. For each record, a value of κ is estimated by following the procedure developed by Anderson and Hough (Bull Seismol Soc Am 74:1969–1993, 1984): this method is based on the analysis of the S-wave spectrum, which has to be performed manually, thus leading to some uncertainties. For the three French regions where most records are available (the Pyrenees, the Alps and the Côtes-d’Azur), a regional κ model is developed using weighted regression on the local geology (soil or rock) and source-to-site distance. It is found that the studied regions have a mean κ between the values found for WNA and ENA. For example, for the Alps region a κ value of 0.0254 s is found for rock sites, an estimate reasonably consistent with previous studies.     

Chemical residues in lime‐plastered archaeological floors

In addition to research carried out on soils and sediments, there is a parallel field of research applying the same analytical techniques to the study of chemical residues in stuccoes. The most common material used to build floors in Mesoamerica after the Classic period was lime plaster. The study of residues in stuccoes becomes, therefore, a very promising study area. In last 25 years the Archaeological Prospection Laboratory at Mexico's National Autonomous University has developed a research strategy to study human activities based on ethnoarchaeological studies to interpret the distribution of chemical residues in archaeological floors. The most successful applications have been in lime‐plastered surfaces; this article presents a brief review of these works. © 2007 Wiley Periodicals, Inc.     

250 years of sardine and anchovy scale deposition record in Mejillones Bay, northern Chile

Marine oxygen-deficient environments with high sedimentation rates and high primary productivity can provide relevant information regarding variations of ocean–climatic conditions in the past. In the Humboldt current ecosystem, which now hosts huge populations of pelagic fishes (mainly anchovy and sardine), fish scale abundance in the sedimentary record may be useful indicators of environmental change. Here we assess such a proxy record in a 42 cm-long sedimentary core collected from 80 m in Mejillones Bay (23°S, northern Chile). We also analyse fish remains in surface sediment sampled along a bathymetric transect (from 10 to 110 m water depth) in the same bay. In the core-top record, the fluctuations of sardine and anchovy scale deposition rates (SDR) agreed with those of industrial catches for these two species in northern Chile, tending to validate the SDR as a proxy of local fish biomass when bottom anoxic conditions prevail. However, apparent SDR for records prior to 1820 have probably been influenced by dissolution processes linked to the oxygenation of the bottom environment of Mejillones Bay, as suggested by other proxy records. After 1820, the fluctuations in the relative abundance of sardine and anchovy scales point to alternating warm and cold conditions during about 30 years and then a progressively cooler period. Since ca. 1870, marked fluctuations of SDR of both species are observed, probably as a consequence of the onset of a different oceanographic regime characterized by intensified upwelling, stronger subsurface oxygen deficiency, higher primary productivity, and enhanced “ENSO-like” interdecadal variability. While anchovy SDR fluctuated in periods of 25–40 years, only two peak periods of sardine SDR occurred (late 19th century and late 20th century), suggesting that sardine abundance depends on other ocean–climatic factors.     

Kinematics and Stellar Populations of Seyfert Galaxies

We have analyzed high signal-to-noise spectra of 10 active galaxies in order to investigate the stellar populations of these objects and the kinematics of the gas and stars in their nuclei. This revised version was published online in July 2006 with corrections to the Cover Date.     

Morphological and speleothemic development in Brujas Cave (Southern Andean Range, Argentine): palaeoenvironmental significance

Brujas Cave, in the Southern Andean Range, is a well-known endokarstic site in Argentina. However, the origin and evolution of this cave system are poorly known. Based on morphological cave features as well as characteristics of cave deposits, we propose a meteogene drawdown cave genesis, including a change from phreatic to vadose conditions related to the high rate of fluvial downcutting in the area. During the vadose period, various cave-related deposits, including authogenic calcite and gypsum speleothems, allogenic volcanic ash and external tufas were deposited. Gypsum crusts are the oldest cave deposits identified (90.2–64.3 ky BP). Their origin, deduced from isotopic characteristics (∂³⁴S=9.6‰), is related to the oxidation of pyrite contained in the Jurassic limestone bedrock as well as the dissolution of overlying Jurassic–Triassic evaporite formations. Gypsum crust deposition is associated with evaporation of water flowing and seeping into the cave during arid environmental conditions. Calcite deposits precipitated from flowing water under equilibrium conditions represent the main speleothem growth period (67.6–34 ky BP in age). Their stable isotope values (∂¹³C=−3‰ to −5‰ and ∂¹⁸O=−9‰ to −11‰) may indicate slightly humid and warm conditions related to the regional Minchin lacustrine phase and global oxygen isotope stage 3. Following this stage, a seismic event is evidenced by accumulations of broken stalactites. Seepage calcite speleothems covering cave walls were deposited under disequilibrium conditions by evaporation, probably during Holocene time. Finally, another more recent gypsum deposition period represented by gypsum balls has been differentiated. Micromorphological as well as isotopic (∂³⁴S=5.6‰) data indicate that these gypsum forms are related to cyclic processes (solution–deposition) from water seeping into the cave under arid conditions. In addition, intense volcanic activity in the area during Holocene time is deduced from allogenic volcanic ash and lapilli located mainly at the entrance cave. At present, limited hydrological activity is observed in the cave and small tufa deposits at karstic discharge points are evidenced. We conclude that the geomorphological evolution of Brujas Cave was controlled by climatic changes (wet and dry stages) under semiarid environmental conditions in a very active tectonic and volcanic setting during Late Quaternary time.     

Land use changes due to energy policy as a determining factor for morphological processes in fluvial systems in São Paulo State,Brazil

The number of hydroelectric dams used for energy production and the cultivation of sugar cane crops for ethanol production have increased significantly in the southeastern region of Brazil. These land use/land cover changes (LULCC) associated with energy policy can affect landscape changes over a range of temporal and spatial scales. This article focuses on how human–landscape interactions have influenced geomorphological dynamics in the lower course of the Piracicaba River for two different scenarios that represent pre‐dam and post‐dam conditions in 1962 and 2007, respectively, and the expansion of sugar cane crops after 1975. This assessment was performed by mapping land use and geomorphological changes in the study area in the 1962 and 2007 scenarios, in addition to quantifying the sedimentation rates upstream from the Barra Bonita Reservoir using ²¹⁰Pb. The main land uses identified for the 1962 scenario were pastures, meadows, annual crops and forests. However, the main land use change was the expansion of sugar cane cropland from 4 to 39%. In the 1962 scenario, the lower course of the Piracicaba River had a predominantly meandering pattern, and there were pronounced alluvial plains in the region. In the 2007 scenario, oxbow lakes were not mapped, and the river terraces were reduced in area due to construction of the Barra Bonita Reservoir. The changes in the sedimentation rates indicate an association between the construction of the Barra Bonita Reservoir and the expansion of sugar cane crops. It was therefore not possible to assess the specific influences of each anthropogenic change on the sedimentation processes, reinforcing that the human–landscape systems in São Paulo State associated with energy policy are complex. Copyright © 2017 John Wiley & Sons, Ltd.