Coastal vulnerability assessment based on video wave run-up observations at a mesotidal,steep-sloped beach

Coastal imagery obtained from a coastal video monitoring station installed at Faro Beach, S. Portugal, was combined with topographic data from 40 surveys to generate a total of 456 timestack images. The timestack images were processed in an open-access, freely available graphical user interface (GUI) software, developed to extract and process time series of the cross-shore position of the swash extrema. The generated dataset of 2% wave run-up exceedence values R ₂ was used to form empirical formulas, using as input typical hydrodynamic and coastal morphological parameters, generating a best-fit case RMS error of 0.39 m. The R ₂ prediction capacity was improved when the shore-normal wind speed component and/or the tidal elevation η _tide were included in the parameterizations, further reducing the RMS errors to 0.364 m. Introducing the tidal level appeared to allow a more accurate representation of the increased wave energy dissipation during low tides, while the negative trend between R ₂ and the shore-normal wind speed component is probably related to the wind effect on wave breaking. The ratio of the infragravity-to-incident frequency energy contributions to the total swash spectra was in general lower than the ones reported in the literature E _infra/E _inci > 0.8, since low-frequency contributions at the steep, reflective Faro Beach become more significant mainly during storm conditions. An additional parameterization for the total run-up elevation was derived considering only 222 measurements for which η _total,2 exceeded 2 m above MSL and the best-fit case resulted in RMS error of 0.41 m. The equation was applied to predict overwash along Faro Beach for four extreme storm scenarios and the predicted overwash beach sections, corresponded to a percentage of the total length ranging from 36% to 75%.     

Environmental factors influencing aggregation of manta rays (Manta birostris) off the northeastern coast of the Yucatan Peninsula

Manta rays inhabit tropical, subtropical and temperate waters. Aggregation sites of manta rays have been recognized worldwide, but the reasons for this behavior are still poorly understood. This study describes environmental factors influencing aggregation sites of the giant manta ray (Manta birostris) off the northeastern coast of the Yucatan Peninsula. Observations of manta rays were obtained from scientific surveys conducted during 2006–2011. Environmental data were obtained from satellite imagery. The maximum entropy (Maxent) method for habitat modeling was used to determine the effects of environmental conditions on the species and predict suitable habitat for manta rays in this region. Primary productivity and distance to the coast were the most influential variables, suggesting that aggregation occurs in highly productive coastal waters. The distribution of manta rays predicted by the Maxent model showed that the most suitable habitat within the study area is located off the northeastern coast of the Yucatán Peninsula, more precisely, northeast of Isla Holbox and northwest of Isla Contoy. Seasonal patterns of distribution suggest that the most suitable conditions are present from July through September.     

Detailed <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of geologic events associated with the Mantos Blancos copper deposit,northern Chile

The ⁴⁰Ar/³⁹Ar geochronological method was applied to date magmatic and hydrothermal alteration events in the Mantos Blancos mining district in the Coastal Cordillera of northern Chile, allowing the distinction of two separate mineralization events. The Late Jurassic Mantos Blancos orebody, hosted in Jurassic volcanic rocks, is a magmatic-hydrothermal breccia-style Cu deposit. Two superimposed mineralization events have been recently proposed. The first event is accompanied by a phyllic hydrothermal alteration affecting a rhyolitic dome. The second mineralization event is related to the intrusion of bimodal stocks and sills inside the deposit. Because of the superposition of several magmatic and hydrothermal events, the obtained ⁴⁰Ar/³⁹Ar age data are complex; however, with a careful interpretation of the age spectra, it is possible to detect complex histories of successive emplacement, alteration, mineralization, and thermal resetting. The extrusion of Jurassic basic to intermediate volcanic rocks of the La Negra Formation is dated at 156.3 ± 1.4 Ma (2σ) using plagioclase from an andesitic lava flow. The first mineralization event and associated phyllic alteration affecting the rhyolitic dome occurred around 155–156 Ma. A younger bimodal intrusive event, supposed to be equivalent to the bimodal stock and sill system inside the deposit, is probably responsible for the second mineralization event dated at ca. 142 Ma. Other low-temperature alteration events have been dated on sericitized plagioclase at ca. 145–146, 125, and 101 Ma. This is the first time that two distinct mineralization events have been documented from radiometric data for a copper deposit in the metallogenic belt of the Coastal Cordillera of northern Chile. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A contribution to regional stratigraphic correlations of the Afro-Brazilian depression – The Dom João Stage (Brotas Group and equivalent units – Late Jurassic) in Northeastern Brazilian sedimentary basins

The Dom João Stage comprises an interval with variable thickness between 100 and 1200 m, composed of fluvial, eolian and lacustrine deposits of Late Jurassic age, based mainly on the lacustrine ostracod fauna (although the top deposits may extend into the Early Cretaceous). These deposits comprise the so-called Afro-Brazilian Depression, initially characterized as containing the Brotas Group of the Recôncavo Basin (which includes the Aliança and the Sergi Formations) and subsequently extended into the Tucano, Jatobá, Camamu, Almada, Sergipe, Alagoas and Araripe Basins in northeastern Brazil, encompassing the study area of this paper. The large occurrence area of the Dom João Stage gives rise to discussions about the depositional connectivity between the basins, and the real extension of sedimentation. In the first studies of this stratigraphic interval, the Dom João Stage was strictly associated with the rift phase, as an initial stage (decades of 1960–70), but subsequent analyses considered the Dom João as an intracratonic basin or pre-rift phase – without any relation to the active mechanics of a tectonic syn-rift phase (decades of 1980–2000). The present work developed an evolutionary stratigraphic and tectonic model, based on the characterization of depositional sequences, internal flooding surfaces, depositional systems arrangement and paleoflow directions. Several outcrops on the onshore basins were used to build composite sections of each basin, comprising facies, architectural elements, depositional systems, stratigraphic and lithostratigraphic frameworks, and paleocurrents. In addition to that, over a hundred onshore and offshore exploration wells were used (only 21 of which are showed) to map the depositional sequences and generate correlation sections. These show the characteristics and relations of the Dom João Stage in each studied basin, and they were also extended to the Gabon Basin. The results indicate that there were two main phases during the Dom João Stage, in which distinctive sedimentary environments were developed, reflecting depositional system arrangements, paleoflow directions were diverse, and continuous or compartmented basins were developed.     

Towards a comprehensive approach to parameter estimation in land surface parameterization schemes

In climate models, the land–atmosphere interactions are described numerically by land surface parameterization (LSP) schemes. The continuing improvement in realism in these schemes comes at the expense of the need to specify a large number of parameters that are either directly measured or estimated. Also, an emerging problem is whether the relationships used in LSPs are universal and globally applicable. One plausible approach to evaluate this is to first minimize uncertainty in model parameters by calibration. In this paper, we conduct a comprehensive analysis of some model diagnostics using a slightly modified version of the Simple Biosphere 3 model for a variety of biomes located mainly in the Amazon. First, the degree of influence of each individual parameter in simulating surface fluxes is identified. Next, we estimate parameters using a multi‐operator genetic algorithm applied in a multi‐objective context and evaluate simulations of energy and carbon fluxes against observations. Compared with the default parameter sets, these parameter estimates improve the partitioning of energy fluxes in forest and cropland sites and provide better simulations of daytime increases in assimilation of net carbon during the dry season at forest sites. Finally, a detailed assessment of the parameter estimation problem was performed by accounting for the decomposition of the mean squared error to the total model uncertainty. Analysis of the total prediction uncertainty reveals that the parameter adjustments significantly improve reproduction of the mean and variability of the flux time series at all sites and generally remove seasonality of the errors but do not improve dynamical properties. Our results demonstrate that error decomposition provides a meaningful and intuitive way to understand differences in model performance. To make further advancements in the knowledge of these models, we encourage the LSP community to adopt similar approaches in the future. Copyright © 2012 John Wiley & Sons, Ltd.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

Mid-infrared, spatially resolved spectroscopy of the nucleus of the Circinus galaxy

High spatial resolution spectroscopy at 8–13 μm with T-ReCS on Gemini-S has revealed striking variations in the mid-infrared emission and absorption in the nucleus of the Circinus galaxy (hereafter Circinus) on subarcsecond scales. The core of Circinus is compact and obscured by a substantial column of cool silicate dust. Weak extended emission to the east and west coincides with the coronal line region and arises from featureless dust grains which are probably heated by line emission in the coronal emission zone. The extended emission on the east side of the nucleus displays a much deeper silicate absorption than that on the west, indicating significant columns of cool material along the line of sight and corresponding to an additional extinction of   A_V ∼ 25 mag  . Emission bands from aromatic hydrocarbons are not subject to this additional extinction, are relatively weak in the core and in the coronal line region, and are much more spatially extended than the continuum dust emission; they presumably arise in the circumnuclear star-forming regions. These data are interpreted in terms of an inclined disc-like structure around the nucleus extending over tens of parsecs and possibly related to the inner disc found from observations of water masers by Greenhill et al..     

Geochemical evidence (C,N and Pb isotopes) of recent anthropogenic impact in south‐central Chile from two environmentally distinct lake sediment records

In this paper, we compare the elemental and isotopic (C, N, Pb) geochemistry of lake sediments from two contrasted environments in south‐central Chile. The first lake, Laguna Chica de San Pedro (LCSP), is situated in the urbanised area of the Biobio Region (36°S). The second lake, Lago Puyehue (40° S), is located 400 km to the southeast of LCSP and within an Andean national park. Our aim is to identify environmental impacts associated with increasing industrial activities and land degradation during the last 150 a. In LCSP, shifts in C/N atomic ratios, δ¹³C and δ¹⁵N from 1915–1937 to the late 1980s are attributed to successive land degradation episodes in the lake watershed. Based on a Pb isotopic mixing model, we estimate that up to 20% of lead in LCSP sediments is supplied from urban atmospheric pollution. By contrast, human impact in the watershed of Lago Puyehue is very limited. We observe no change in organic geochemistry during the last 150 a and lead contamination remains lower than 5%, even during the last decades. Although contamination levels are much higher in LCSP than in Lago Puyehue, a peak in anthropogenic Pb is recorded during the same period (1974–1976) at both sites. This maximum contamination level is consistent with increased industrial activity in the vicinity of Concepción. Copyright © 2010 John Wiley & Sons, Ltd.     

shinyNORRRM: A Cross-Platform Software to Calculate the CIPW Norm

In this paper, a novelty-free software to assess an efficient CIPW Norm (± 0.006 wt.% in differences between input and output data) is presented. The package is available in the official repository for user-contributed R packages (CRAN: Comprehensive R Archive Network). The software is able to handle big data sets and considers minor and trace element compositions. The algorithm can calculate odd minerals in igneous rocks, such as cancrinite and calcite, adjust the Fe⁺³/Fe⁺² ratio in different standard approaches, and recalculate the compositions of the rocks in an anhydrous basis (100 ± 0.003 wt.% volatile-free adjusted). Furthermore, the package calculates several petrological parameters, and the graphical outputs are displayed following IUGS scheme standards. The prime aspect of shinyNORRRM is the symbiosis of native R functions with the R package’s shiny (Web Application Framework for R) to run the norm in a user-friendly interface. shinyNORRRM can be executed in any operating system and requires no previous programming knowledge, thus promising to be the universal computational program in this matter. The output data are printed in the standard comma-separated values (*.csv) format, which is highly compatible with general spreadsheet editors. In this work, the algorithm of our program is validated using already compiled whole-rock geochemical databases.

     

Verification of two hydrological models for real-time flood forecasting in the Hindu Kush Himalaya (HKH) region

Natural Hazards - The Hindu Kush Himalayan region is extremely susceptible to periodic monsoon floods. Early warning systems with the ability to predict floods in advance can benefit tens of...