The determination of deep temperatures by means of the CO-CO2-H2-H2O geothermometer: an example using fumaroles in the Campi Flegrei,Italy. A comment

Three points raised in the paper by Tedesco and Sabroux (1987) are dealt with. (1) The inconsistency between the water partial pressure calculated by Tedesco and Sabroux (1987) and saturation pressure is due to the improper use of the water-gas-shift reaction as a geothermometer. In fact Tedesco and Sabroux (1987) do not take into account the distribution of gas species between the coexisting vapour and liquid phases. (2) The depth of the “steam reservoir” is evaluated by Tedesco and Sabroux (1987) in too simplistic a way. This matter should be treated with greater care owing to the high social impact of any consideration on the Phlegraean Fields system. (3) The reliability of carbon monoxide determination at the concentration level encountered at Solfatara depends on the collection method rather than on the gas-chromatographic technique.     

Prediction of the thermodynamic properties of metal–arsenate and metal–arsenite aqueous complexes to high temperatures and pressures and some geological consequences

The standard thermodynamic properties at 25°C, 1 bar (ΔG _f^o, ΔH _f^o, S ^o, C _P^o, V ^o, ω) and the coefficients of the revised Helgeson–Kirkham–Flowers equations of state were evaluated for several aqueous complexes formed by dissolved metals and either arsenate or arsenite ions. The guidelines of Shock and Helgeson (Geochim Cosmochim Acta 52:2009–2036, 1988) and Sverjensky et al. (Geochim Cosmochim Acta 61:1359–1412, 1997) were followed and corroborated with alternative approaches, whenever possible. The SUPCRT92 computer code was used to generate the log K of the destruction reactions of these metal–arsenate and metal–arsenite aqueous complexes at pressures and temperatures required by the EQ3/6 software package, version 7.2b. Apart from the AlAsO₄^o and FeAsO₄^o complexes, our log K at 25°C, 1 bar are in fair agreement with those of Whiting (MS Thesis, Colorado School of Mines, Golden, CO, 1992). Moreover, the equilibrium constants evaluated in this study are in good to fair agreement with those determined experimentally for the Ca–dihydroarsenate and Ca–hydroarsenate complexes at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) and for Fe(III)–hydroarsenate complex at 25°C (Raposo et al., J Sol Chem 35:79–94, 2006), whereas the disagreement with the log K measured for the Ca–arsenate complex at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) might be due to uncertainties in this measured value. The implications of aqueous complexing between dissolved metals and arsenate/arsenite ions were investigated for seawater, high-temperature geothermal liquids and acid mine drainage and aqueous solutions deriving from mixing of acid mine waters and surface waters. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Extensive impact melting on the H-chondrite parent asteroid during the cataclysmic bombardment of the early solar system: Evidence from the achondritic meteorite Dar al Gani 896

DaG 896 is an olivine-rich microporphyritic rock of komatiitic composition. Both the olivine composition (Fa_17.5±2.1, [Mn/Mg] = 0.0061) and the bulk oxygen isotopic composition (δ17O = +2.55, δ18O = +3.50) indicate that DaG 896 is a sample of the H-chondrite parent body. The bulk chemistry shows an H-chondritic distribution of lithophile elements, whereas chalcophile and siderophile elements are strongly depleted, indicating formation through whole-rock melting (or nearly so) of H-chondrite material, nearly complete loss of the metal plus sulfide component, and crystallization without significant igneous fractionation. Superheated, severely shocked chondritic relics (∼10 vol%), typically in the form of corroded lithic fragments <100 μm in size intimately distributed within the igneous lithology, indicate that melting was triggered by a highly energetic impact, which possibly induced shock pressures of ∼80-100 GPa. The relatively young 3.704 ± 0.035 Ga 40Ar-39Ar crystallization age is consistent with the impact melting origin, as magmatism in the asteroid belt was active only in the first hundred million years of solar system history.Based on textural data and thermodynamic crystallization modelling, we infer that DaG 896 crystallized from a liquidus temperature of ∼1630°C under relatively slow cooling rates (∼10°C h⁻¹) to ∼1300°C, before quenching. The two-stage cooling history indicates that a reasonable formation environment might be a dike intruding cooler basement below a crater floor. Metal-silicate fractionation may have been accomplished, at least at the centimeter-scale of the studied meteorite sample, through differential acceleration of immiscible liquids of different density during the intense flow regimes associated with the excavation and modification stages of the cratering mechanism. Alternatively, DaG 896 may represent a surface sample of a differentiated melt body at the floor of an impact crater, as gravitational settling appears to be an effective process at the surface of a chondritic parent asteroid: for metal particles 1 to 10 mm in size, typically observed in partially differentiated impact melt rocks, Stokes’ Law indicates a settling velocity >1 m h ⁻¹ during the first few hours of crystallization on asteroidal bodies of >25 km radius.The ∼3.7 Ga age of DaG 896 nearly overlaps with the slightly older resetting ages of H-chondrites (all impact melts) available from the literature, indicating that the H-chondrite parent asteroid underwent extensive impact melting at the enduring of the cataclysmic bombardment of the early solar system. Such an age overlap may also indicate early disruption of the initial H-chondrite parent asteroid.The close similarity between the bulk composition and degassing age of DaG 896 and silicate inclusions in IIE iron meteorites is further evidence in support of a common origin by impact melting and metal-silicate segregation on the H-chondrite parent asteroid. Our new high-precision oxygen isotopic measurements of H-chondrites (Δ17O = 0.77 ± 0.04) should be extended to IIEs to verify this possible petrogenetic link.     

Modelling Dust in Galactic SEDs: Application to Semi-Analytical Galaxy Formation Models

We present the basic features and preliminary results of the interface between our spectrophotometric model GRASIL (which calculates galactic SEDs from the UV to the submm with a detailed computation of dust extinction and thermal reemission) with the semi-analytical galaxy formation model GALFORM (which computes galaxy formation and evolution in the hierarchical scenario, providing the star formation history as an input to our model). With these two models we are able to synthesize simulated samples of a few thousand galaxies for statistical studies of galaxy properties to investigate galaxy formation and evolution. There is good agreement with the available SED and luminosity function data. This revised version was published online in July 2006 with corrections to the Cover Date.     

Microscopic impactor debris in the soil around Kamil crater (Egypt): Inventory,distribution, total mass,and implications for the impact scenario

We report on the microscopic impactor debris around Kamil crater (45 m in diameter, Egypt) collected during our 2010 geophysical expedition. The hypervelocity impact of Gebel Kamil (Ni‐rich ataxite) on a sandstone target produced a downrange ejecta curtain of microscopic impactor debris due SE–SW of the crater (extending ~300,000 m², up to ~400 m from the crater), in agreement with previous determination of the impactor trajectory. The microscopic impactor debris include vesicular masses, spherules, and coatings of dark impact melt glass which is a mixture of impactor and target materials (Si‐, Fe‐, and Al‐rich glass), plus Fe‐Ni oxide spherules and mini shrapnel, documenting that these products can be found in craters as small as few tens of meters in diameter. The estimated mass of the microscopic impactor debris (<290 kg) derived from Ni concentrations in the soil is a small fraction of the total impactor mass (~10 t) in the form of macroscopic shrapnel. That Kamil crater was generated by a relatively small impactor is consistent with literature estimates of its pre‐atmospheric mass (>20 t, likely 50–60 t).     

Millimetric properties of IRAS galaxies – III. Luminosity functions, sub-mm counts and contributions to the sky background

We exploit observations at 1.25 mm with the ESO–SEST telescope of a southern galaxy sample, selected from the IRAS PSC and complete to S ₆₀=2 Jy, to derive the FIR and mm luminosity functions and the conditional probability distributions of FIR and mm luminosity of galaxies. The reliability of these estimates is ensured by the good observed correlation of the far-infrared and mm emissions. This detailed knowledge of the millimetric properties of galaxies is used to simulate the extragalactic sub-mm sky (background intensity, small-scale anisotropy signals and discrete source statistics), which is the target of a variety of ground-based and space observatories. We find, in particular, that a recent tentative detection of a sub-mm background would require, if confirmed, strong evolution with cosmic time of the galaxy long-wavelength emissivity. We finally discuss ways to test such evolution with present and forthcoming facilities: while emphasizing the difficulty of achieving this with large mm telescopes on the ground (because of the poor atmospheric conditions of current sub-mm sites), we mention an interesting opportunity with the long-wavelength camera on ISO . Preliminary results of deep surveys, both from space and from the ground, seem indeed to require excess emission in the past by dusty galaxies with respect to no-evolution predictions.     

Spatial and temporal intercomparison of four global burned area products

We characterize the agreement and disagreement of four publically available burned products (Fire CCI, Copernicus Burnt Area, MODIS MCD45A1, and MODIS MCD64A1) at a finer spatial and temporal scale than previous assessments using a grid of three-dimensional cells defined both in space and in time. Our analysis, conducted using seven years of data (2005–2011), shows that estimates of burned area vary greatly between products in terms of total area burned, the location of burning, and the timing of the burning. We use regional and monthly units for analysis to provide insight into the variation between products that can be lost when considering products yearly and/or globally. Comparison with independent, contemporaneous MODIS active fire observations provides one indication of which products most reasonably capture the burning regime. Our results have implications for the use of global burned area products in fire ecology, management and emissions applications.     

Silicate liquid immiscibility in impact melts

We have investigated silicate emulsions in impact glasses and impact melt rocks from the Wabar (Saudi Arabia), Kamil (Egypt), Barringer (USA), and Tenoumer (Mauritania) impact structures, and in experimentally generated impact glasses and laser-generated glasses (MEMIN research unit) by scanning electron microscopy, electron microprobe analysis, and transmission electron microscopy. Textural evidence of silicate liquid immiscibility includes droplets of one glass disseminated in a chemically distinct glassy matrix; sharp phase boundaries (menisci) between the two glasses; deformation and coalescence of droplets; and occurrence of secondary, nanometer-sized quench droplets in Si-rich glasses. The compositions of the conjugate immiscible liquids (Si-rich and Fe-rich) are consistent with phase separation in two-liquid fields in the general system Fe₂SiO₄–KAlSi₃O₈–SiO₂–CaO–MgO–TiO₂–P₂O₅. Major-element partition coefficients are well correlated with the degree of polymerization (NBO/T) of the Si-rich melt: Fe, Ca, Mg, and Ti are concentrated in the poorly polymerized, Fe-rich melt, whereas K, Na, and Si prefer the highly polymerized, Si-rich melt. Partitioning of Al is less pronounced and depends on bulk melt composition. Thus, major element partitioning between the conjugate liquids closely follows trends known from tholeiitic basalts, lunar basalts, and experimental analogs. The characteristics of impact melt inhomogeneity produced by melt unmixing in a miscibility gap are then compared to impact melt inhomogeneity caused by incomplete homogenization of different (miscible or immiscible) impact melts that result from shock melting of different target lithologies from the crater's melt zone, which do not fully homogenize and equilibrate due to rapid quenching. By taking previous reports on silicate emulsions in impact glasses into account, it follows that silicate impact melts of variable composition, cooling rate, and crystallization history might readily unmix during cooling, thereby rendering silicate liquid immiscibility a much more common process in the evolution of impact melts than previously recognized.     

Characteristics of quadrant and octant advection schemes in wave models

We point out one problem of the grid advection schemes when used in wave models in coastal areas. The deficiency of the schemes is investigated by means of the ‘third' generation WAM wave model, in which the wave energy is advected by a first order upwind scheme. Two similar, alternative modifications of this scheme are analyzed, the second of which is shown to solve most of the problems encountered with advection along the co-ordinate axes.     

Sequence stratigraphy based on high-resolution seismic profiles in the late Pleistocene and Holocene deposits of the Venice area

The sequence-stratigraphic investigation by Very High-Resolution (VHR) seismic profiles allowed recognition of the detailed architecture of the late Pleistocene and Holocene succession of the Venice area. In this way deposits previously known by the analyses of scattered cores, mainly taken along the lagoon margin and the littoral strips, have been correlated at regional scale including the near offshore sector and the result has pointed out the lateral variability of the stratal architecture. Late Pleistocene deposits consist of an aggrading floodplain and fluvial channel fills accumulated during decreasing eustatic sea level, and they are coeval with offlapping forced regressive marine wedges in the Central Adriatic basin. The Holocene sequence is composed of three main seismic units separated by major stratal surfaces. Unit 1 (up to 9 m thick) is formed by channelized deposits separated by areas showing sub-horizontal and hummocky reflectors, and is bounded at the base by a surface that records prolonged conditions of subaerial exposure and at the top by a flatter surface resulting from erosion by marine processes. Deposits of Unit 1 are interpreted as estuarine and distributary channel fills, and back-barrier strata. Unit 2 is well distinguishable from Unit 1 only in the offshore area and at the barrier island bounding the Venice Lagoon, and is composed of a prograding marine wedge (up to 10 m thick) that interacts laterally with ebb tidal deltas. Unit 3 consists of a tidal channel complex and inlet deposits, which testify the evolution of the lagoon area. Tidal channels are entrenched in the lagoon mud flat (coeval with Units 1–2) and cut the Pleistocene–Holocene boundary in several places.Following current sequence-stratigraphic concepts, the Holocene sequence is composed of a paralic transgressive systems tract (TST) (Unit 1) overlying a sequence boundary (the Pleistocene–Holocene boundary) and overlain by a marine highstand systems tract (HST) (Unit 2) in seaward locations and by highstand lagoonal deposits landwards. TST and HST are separated by a downlap surface that is amalgamated with a wave ravinement surface in several places. Unit 3 is coeval with the upper part of Unit 2, and its development has been favoured by human interventions, which led to a transgression limited to the lagoon area.Local factors during the deposition, i.e. subsidence, sediment supply, physiography, and current/wave regimes, led to a significant lateral variability in the architecture of the Holocene sequence, as evidenced by the extreme thickness variation of the TST along both depositional strike and dip. The HST, instead, shows less pronounced strike variations in the stratal architecture. Also, present data clearly evidence that the human impact has a great relevance in influencing the late Holocene sedimentation.