A reconfigurable real-time interpolation beamformer

This paper describes an architecture for a compact real-time time-delay sonar beamformer. The design is based on a time-domain interpolation concept, and includes shading, interpolation, and time-delay functions for up to 64 sensor data inputs. A one card per beam configuration has been achieved. The digital interpolation technique used improves the effective sampling rate by a factor of 128. The beamformer design features 16-bit arithmetic precision, up to approximately a 5-kHz sampling rate for each of the 64 sensor input channels, and adaptability to any type of array, e.g., linear, circular, or arrays with nonequal interelement spacings. A 31-beam beamformer system, performing more than 620-million arithmetic operations a second, is discussed.     

Influence of the resonance in a gravity-gradient stabilized satellite

Using Hamiltonian formalism the translational-rotational motion of a satellite is studied near a resonance considering the orbital and rotational motions. A first order perturbation theory is derived by Hori's transformation in order to eliminate short and long periodic terms, preserving in the new Hamiltonian secular and resonant terms. This theory is again applied to study the resonant system whose analysis lead us to a system of equations equivalent to the equations of a simple pendulum which is integrable in terms of elliptical integrals.     

Aquifer development planning to supply a seaside resort: a case study in Goa,India

Using the hydrogeological and socio-economic data derived from a European Commission research project on the measurement, monitoring and sustainability of the coastal environment, two optimization models have been applied to satisfy the future water resources needs of the coastal zone of Bardez in Goa, India. The number of tourists visiting Goa since the 1970s has risen considerably, and roughly a third of them go to Bardez taluka, prompting growth in the tourist-related infrastructure in the region. The optimization models are non-linear mixed integer models that have been solved using GAMS/DICOPT++ commercial software. Optimization models were used, firstly, to indicate the most suitable zones for building seaside resorts and wells to supply the tourist industry with an adequate amount of water, and secondly, to indicate the best location for wells to adequately supply pre-existing hotels. The models presented will help to define the optimal locations for the wells and the hydraulic infrastructures needed to satisfy demand at minimum cost, taking into account environmental constraints such as the risk of saline intrusion.

---

Résumé A l’aide de données hydrogéologiques et socio-économiques, dérivées d’un projet de recherche de la Commission Européenne sur l’étude, la surveillance et la durabilité de l’environnement c?tier, deux modèles d’optimisation ont été appliqués en vue de satisfaire les besoins futurs en ressources en eau de la zone c?tière de Bardez au Goa en Inde. Le nombre de touristes qui visitent le Goa depuis les années 70 a considérablement augmenté et environ un tiers d’entre eux se rend à Bardez taluka, ce qui encourage la croissance des infrastructures liées au tourisme dans la région. Les modèles d’optimisation sont des modèles non linéaires mixtes en nombres entiers qui ont été résolus en utilisant le logiciel commercial GAMS/DICOPT++. Les modèles d’optimisation ont été utilisés pour indiquer premièrement les zones les plus appropriées pour construire des stations balnéaires et des puits pour approvisionner en quantité d’eau suffisante l’industrie touristique, et deuxièmement pour indiquer la meilleure localisation de puits pour l’alimentation des h?tels préexistants. Les modèles présentés aideront à définir les localisations optimales des puits et des infrastructures hydrauliques nécessaires à la satisfaction de la demande à un co?t minimum, tout en prenant en compte les contraintes environnementales, tel que le risque d’intrusion saline.

---

Resumen Se han aplicado dos modelos de optimización en base a datos socio-económicos e hidrogeológicos derivados de un proyecto de investigación de la Comisión Europea sobre medición, monitoreo y sostenibilidad del ambiente costero para satisfacer las necesidades futuras de recursos hídricos de la zona costera de Bardez en Goa, India. El número de turistas que visita Goa desde la década de 1970′s ha subido considerablemente y cerca de un tercio de ellos van a Bardez taluka impulsando el crecimiento en la infraestructura turística de la región. Los modelos de optimización son modelos de números enteros mixtos no-lineales que se han resuelto usando el programa comercial GAMS/DICOPT++. Los modelos de optimización se usaron, primero para indicar las zonas más adecuadas para la construcción de centros de diversión en las márgenes del océano y pozos para abastecer la industria turística con una adecuada cantidad de agua, y segundo, para indicar la mejor localización de pozos para el abastecimiento de hoteles pre-existentes. Los modelos que se presentan ayudarán a definir las localizaciones óptimas para los pozos y las infraestructuras hidráulicas necesarias para satisfacer la demanda al mínimo costo, tomando en consideración restricciones ambientales tal como el riesgo de intrusión salina.

     

Limpets as prey: Lipophrys pholis choice for size

Patellid limpets are key species on rocky shores, structuring intertidal assemblages through their grazing. Their role as prey for fish is, however, often overlooked in studies of intertidal ecosystem functioning. The shanny Lipophrys pholis is a common predator of limpets on rocky shores in Northern Europe and, in this study, we examined the characteristics of its predation on limpets based on prey size. The limpet size range that adult L. pholis (10–12.5 cm) can eat was examined in the laboratory using Patella depressa in 0.2 cm classes, varying between 0.5 cm and 3.0 cm in maximum shell length. There was a limpet size refuge above 1.8 cm, while all smaller sizes were readily consumed by the shanny. The predator attacking behaviour was also examined and found to vary with prey size. Limpets up to 0.8 cm were crushed by the jaw‐constricting force and eaten whole, whereas larger prey were prised from the substratum and the body subsequently separated from the shell. To examine whether there was a L. pholis preference for P. depressa size, a two‐stage laboratory experiment was done using two size classes defined as small (0.7–0.8 cm maximum shell length) and large (1.5–1.6 cm maximum shell length). In the first stage, the predator was given each limpet size class separately. In the second stage, the fish was given a choice between the two classes. Lipophrys pholis was shown to have a preference for the large size class (1.5–1.6 cm). The average number of limpets consumed by the shanny was examined for the duration of one high‐tide typical of the central region of Portugal (≈ 4 h). On average, approximately five limpets (up to an eight limpet maximum) were consumed. The present study shows that L. pholis has a feeding preference based on limpet size, which suggests that the limpet population structure and intra‐ and inter‐specific interactions may be influenced by the shanny predation.     

Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

基于主成分分析和分形模型的ASTER蚀变异常信息提取

遥感蚀变异常信息在一定程度上可以反映出围岩蚀变情况.为了利用遥感数据提取围岩蚀变异常信息,通过分析蚀变矿物的波谱曲线,首先得出其在ASTER各波段的吸收、反射特征;然后选择特征明显的波段做主成分分析,并依据其光谱特征与特征向量的对应关系,确定出主要包含围岩蚀变信息的主分量;最后对该分量用分形模型计算其异常灰度的阚值,来...     

树轮纤维素中氧同位素温度意义

树轮作为自然档案中的一种, 其同位素研究是较为新颖的领域文章比较系统地从树轮纤维素的提取、氧的来源、植物体内氧的分馏、与温度变化的关系等４ 个方面评述了树轮纤维素氧同位素组成的气候学意义已有的研究结果表明, 树轮纤维素氧同位素组成的变化是温度变化的良好载体, 但在定量恢复古温度变化时遇到了不少限制, 有待于进一步完善分馏模型     

Overview of integrative tools and methods in assessing ecological integrity in estuarine and coastal systems worldwide

In recent years, several sets of legislation worldwide (Oceans Act in USA, Australia or Canada; Water Framework Directive or Marine Strategy in Europe, National Water Act in South Africa, etc.) have been developed in order to address ecological quality or integrity, within estuarine and coastal systems. Most such legislation seeks to define quality in an integrative way, by using several biological elements, together with physico-chemical and pollution elements. Such an approach allows assessment of ecological status at the ecosystem level ('ecosystem approach' or 'holistic approach' methodologies), rather than at species level (e.g. mussel biomonitoring or Mussel Watch) or just at chemical level (i.e. quality objectives) alone. Increasing attention has been paid to the development of tools for different physico-chemical or biological (phytoplankton, zooplankton, benthos, algae, phanerogams, fishes) elements of the ecosystems. However, few methodologies integrate all the elements into a single evaluation of a water body. The need for such integrative tools to assess ecosystem quality is very important, both from a scientific and stakeholder point of view. Politicians and managers need information from simple and pragmatic, but scientifically sound methodologies, in order to show to society the evolution of a zone (estuary, coastal area, etc.), taking into account human pressures or recovery processes. These approaches include: (i) multidisciplinarity, inherent in the teams involved in their implementation; (ii) integration of biotic and abiotic factors; (iii) accurate and validated methods in determining ecological integrity; and (iv) adequate indicators to follow the evolution of the monitored ecosystems. While some countries increasingly use the establishment of marine parks to conserve marine biodiversity and ecological integrity, there is awareness (e.g. in Australia) that conservation and management of marine ecosystems cannot be restricted to Marine Protected Areas but must include areas outside such reserves. This contribution reviews the current situation of integrative ecological assessment worldwide, by presenting several examples from each of the continents: Africa, Asia, Australia, Europe and North America.     

Moisture transport and intraseasonal variability in the South America monsoon system

This paper examines moisture transport on intraseasonal timescales over the continent and over the South Atlantic convergence zone (SACZ) during the South America (SA) summer monsoon. Combined Empirical Orthogonal Function analysis (EOFc) of Global Precipitation Climatology Project pentad precipitation, specific humidity, air temperature, zonal and meridional winds at 850?hPa (NCEP/NCAR reanalysis) are performed to identify the large-scale variability of the South America monsoon system and the SACZ. The first EOFc was used as a large-scale index for the South American monsoon (LISAM), whereas the second EOFc characterized the SACZ. LISAM (SACZ) index showed spectral variance on 30?C90 (15?C20) days and were both band filtered (10?C100?days). Intraseasonal wet anomalies were defined when LISAM and SACZ anomalies were above the 75th percentile of their respective distribution. LISAM and SACZ wet events were examined independently of each other and when they occur simultaneously. LISAM wet events were observed with the amplification of wave activity in the Northern Hemisphere and the enhancement of northwesterly cross-equatorial moisture transport over tropical continental SA. Enhanced SACZ was observed with moisture transport from the extratropics of the Southern Hemisphere. Simultaneous LISAM and SACZ wet events are associated with cross-equatorial moisture transport along with moisture transport from Subtropical Southwestern Atlantic.     

山地丘陵地区物探爆破孔钻机及配套机具的研究与开发

为满足我国山地丘陵地区物探爆破孔施工技术的要求，研究适合土层、岩层钻进用的钻机及工具，对钻机的配套设备进行了开发研究。分析了国内山地丘陵地区物探爆破孔施工技术现状，并着重介绍了研制设计内容及生产试验情况。