Large Earthquakes at the Ibero-Maghrebian Region: Basis for an EEWS

Large earthquakes (M_w > 6, I_max > VIII) occur at the Ibero-Maghrebian region, extending from a point (12ºW) southwest of Cape St. Vincent to Tunisia, with different characteristics depending on their location, which cause considerable damage and casualties. Seismic activity at this region is associated with the boundary between the lithospheric plates of Eurasia and Africa, which extends from the Azores Islands to Tunisia. The boundary at Cape St. Vincent, which has a clear oceanic nature in the westernmost part, experiences a transition from an oceanic to a continental boundary, with the interaction of the southern border of the Iberian Peninsula, the northern border of Africa, and the Alboran basin between them, corresponding to a wide area of deformation. Further to the east, the plate boundary recovers its oceanic nature following the northern coast of Algeria and Tunisia. The region has been divided into four zones with different seismic characteristics. From west to east, large earthquake occurrence, focal depth, total seismic moment tensor, and average seismic slip velocities for each zone along the region show the differences in seismic release of deformation. This must be taken into account in developing an EEWS for the region.     

Deep-sea Fe-Mn Crusts from the Northeast Atlantic Ocean: Composition and Resource Considerations

Eighteen deep-sea ferromanganese crusts (Fe-Mn crusts) from 10 seamounts in the northeast Atlantic were studied. Samples were recovered from water depths of ～1,200 to ～4,600 m from seamounts near Madeira, the Canary and Azores islands, and one sample from the western Mediterranean Sea.

The mineralogical and chemical compositions of the samples indicate that the crusts are typical continental margin, hydrogenetic Fe-Mn crusts. The Fe-Mn crusts exhibit a Co + Cu + Ni maximum of 0.96 wt%. Platinum-group element contents analyzed for five samples showed Pt contents from 153 to 512 ppb.

The resource potential of Fe-Mn crusts within and adjacent to the Portuguese Exclusive Economic Zone (EEZ) is evaluated to be comparable to that of crusts in the central Pacific, indicating that these Atlantic deposits may be an important future resource.     

Contamination of port zone sediments by metals from Large Marine Ecosystems of Brazil

Sediment contamination by metals poses risks to coastal ecosystems and is considered to be problematic to dredging operations. In Brazil, there are differences in sedimentology along the Large Marine Ecosystems in relation to the metal distributions. We aimed to assess the extent of Al, Fe, Hg, Cd, Cr, Cu, Ni, Pb and Zn contamination in sediments from port zones in northeast (Mucuripe and Pecém) and southeast (Santos) Brazil through geochemical analyses and sediment quality ratings. The metal concentrations found in these port zones were higher than those observed in the continental shelf or the background values in both regions. In the northeast, metals were associated with carbonate, while in Santos, they were associated with mud. Geochemical analyses showed enrichments in Hg, Cd, Cu, Ni and Zn, and a simple application of international sediment quality guidelines failed to predict their impacts, whereas the use of site-specific values that were derived by geochemical and ecotoxicological approaches seemed to be more appropriate in the management of the dredged sediments.     

Adaptive neuro-fuzzy inference systems for semi-automatic discrimination between seismic events: a study in Tehran region

Thisarticle presents an adaptive neuro-fuzzy inference system (ANFIS) for classification of low magnitude seismic events reported in Iran by the network of Tehran Disaster Mitigation and Management Organization (TDMMO). ANFIS classifiers were used to detect seismic events using six inputs that defined the seismic events. Neuro-fuzzy coding was applied using the six extracted features as ANFIS inputs. Two types of events were defined: weak earthquakes and mining blasts. The data comprised 748 events (6289 signals) ranging from magnitude 1.1 to 4.6 recorded at 13 seismic stations between 2004 and 2009. We surveyed that there are almost 223 earthquakes with M ≤ 2.2 included in this database. Data sets from the south, east, and southeast of the city of Tehran were used to evaluate the best short period seismic discriminants, and features as inputs such as origin time of event, distance (source to station), latitude of epicenter, longitude of epicenter, magnitude, and spectral analysis (fc of the Pg wave) were used, increasing the rate of correct classification and decreasing the confusion rate between weak earthquakes and quarry blasts. The performance of the ANFIS model was evaluated for training and classification accuracy. The results confirmed that the proposed ANFIS model has good potential for determining seismic events.     

Seismic characterization of switching platform geometries and dominant carbonate producers (Miocene,Las Negras,Spain)

The primary goals of seismic interpretation and quantification are to understand and define reservoir architecture and the distribution of petrophysical properties. Since seismic interpretation is associated with major uncertainties, outcrop analogues are used to support and improve the resulting conceptual models. In this study, the Miocene carbonates of Cerro de la Molata (Las Negras, south‐east Spain) have been selected as an outcrop analogue. The heterogeneous carbonate rocks of the Cerro de la Molata Platform were formed by a variety of carbonate‐producing factories, resulting in various platform morphologies and a wide range of physical properties. Based on textural (thin sections) and petrophysical (porosity, density, carbonate content and acoustic properties) analyses of the sediments, eleven individual facies types were determined. The data were used to produce synthetic seismic profiles of the outcrop. The profiles demonstrate that the spatial distribution of the facies and the linked petrophysical properties are of key importance in the appearance of the synthetic seismic sections. They reveal that carbonate factory and facies‐specific reflection patterns are determined by porosity contrasts, diagenetic modifications and the input of non‐carbonate sediment. The reflectors of the seismograms created with high‐frequency wavelets are coherent with the spatial distribution of the predefined facies within the depositional sequences. The synthetic seismograms resulting from convolution with lower frequency wavelets do not show these details – the major reflectors coincide with: (i) the boundary between the volcanic basement and the overlying carbonates; (ii) the platform geometries related to changes in carbonate factories, thus sequence boundaries; and (iii) diagenetic zones. Changes in seismic response related to diagenesis, switching carbonate producers and linked platform geometries are important findings that need to be considered when interpreting seismic data sets.     

Deposition and tectonic setting of the Palaeoproterozoic Castelo dos Sonhos metasedimentary formation,Tapajós Gold Province,Amazonian Craton,Brazil: age and isotopic constraints

The Castelo dos Sonhos Formation (CSF) represents a relic of a sedimentary basin located in the southeastern Tapajós Gold Province (TGP), at its boundary with the Iriri–Xingu Domain (IX), south of the Amazonian Craton. The formation comprises mature, coarse-grained metasandstones (quartz-arenites) intercalated with auriferous metaconglomerates with clasts of quartz and subordinately of banded iron formation, quartzite, schist, and felsic metavolcanic rocks. Lithology, planar, channelled, and large-scale cross-bedding suggest deposition in continental setting by the braided fluvial system associated with alluvial fans and subordinate aeolian dunes. The rocks underwent very low metamorphism and gently synformal folding, and were intruded by andesites and granitoids (2011–1918 Ma). U–Pb LA-ICP-MS zircon data indicate maximum depositional ages of 2050 Ma (metaconglomerate) and 2074, 2088, and 2104 Ma (metasandstones). Hence, deposition occurred at 2050–2011 Ma, slightly preceding or being coeval with the onset of the orogenic phase in TGP (2030–1956 Ma). The quartz-arenite composition, zircon U–Pb data, and negative εHf (?1.3 to ?13.0) and εNd (?2.9 to ?5.3) values indicate: (1) quartzose provenance, (2) prolonged transport and recycling of sedimentary sources, (3) multiple age peaks (2050–3700 Ma), with predominant sources of 2100 and 2750 Ma, and (4) long crustal residence time for the source rocks. Source areas were Rhyacian–Siderian orogenic belts to Mesoarchaean terranes of the Amazonian Craton located to the east, southeast, and northeast of TGP, along with Palaeoarchaean and Eoarchaean detrital zircons recycled from older sedimentary rocks. We interpret CSF as part of a larger foreland system related to the evolution of Rhyacian orogens, currently represented by the Bacajá and Santana do Araguaia domains. The present location of CSF in the easternmost TGP, close to its boundary with IX, is due to rifting (1.89–1.80 Ga) that produced the Uatumã Silicic Large Igneous Province (Uatumã SLIP), and the juxtaposition of the crustal domains is supported by gravity data.     

Flood risk assessment in a coastal lagoon under present and future scenarios: Ria de Aveiro case study

Iranian strong motion records as well as detailed conditions of their instrument sites and the characteristics of their causative seismic sources are compiled and processed. The dataset consists of 2286 three-component records from 461 Iranian earthquakes with at least two high-quality records having moment magnitude from 3.9 to 7.3. These records are about 20% of the Iranian database and are suitable for seismic hazard analysis and engineering applications. Perhaps for the first time in the literature, the distance to the surface projection of the fault is reported for a great number of records corresponding to earthquakes with M > 6.0. The raw accelerations are processed using the wavelet de-noising method. Having corrected and filtered these raw data, the pseudospectral accelerations are calculated for each of the three components of time series, separately. In addition to the ground motion parameters, a large and comprehensive list of metadata characterizing the recording conditions of each record is also developed. Moreover, careful revision of the characteristics of the earthquakes such as location, magnitude, style of faulting and fault rupture plane geometry, if available, is carried out using the best available information in a scientifically sound manner. Finally, we also focus on special ground motion records including records with peak ground acceleration (PGA) >300 cm/s² and distances less than 30 km. These are “exceptional” records in the Iranian dataset and include less than 2% of the selected dataset.     

Daily morphological changes determined by high‐energy events on an embayed beach: a qualitative model

This paper examines the daily morphological responses of Sununga Beach, an embayed beach located on the south‐eastern Brazilian coast, to storms in the South Atlantic Ocean. The main mechanisms and timing of beach erosion and accretion, the relationship between wave height and direction, and beach volume changes are considered, to establish a qualitative model for short‐term embayed beach morphological changes. The methodology consisted of daily topographic surveys during the month of May in 2001, 2002, and 2003, using an RTK‐GPS (real‐time kinematics – global positioning system). Weather and wave model results were used to correlate hydrodynamics and beach morphology. The results indicate that the morphodynamics of Sununga Beach are characterized by a process of beach rotation, which occurred more or less clearly during all three surveys. Unlike what has been commonly described in the literature for longer time intervals and alternations of fair and stormy weather, the beach rotation processes on Sununga Beach occurred under conditions of moderate‐to‐high wave energy change (wave heights greater than 2 m). An integrated evaluation of the behaviour of the meteorological aspects, together with beach morphology, enabled us to recognize that extra‐tropical cyclones were the most important agent in remobilizing the beach planform, whether in beach rotation or in cross‐shore erosion. Copyright © 2010 John Wiley & Sons, Ltd.     

Oxidation and emission of methane in a monomictic lake (Rotsee, Switzerland)

The build-up of methane in the hypolimnion of the eutrophic Lake Rotsee (Lucerne, Switzerland) was monitored over a full year. Sources and sinks of methane in the water column were characterized by measuring concentrations and carbon isotopic composition. In fall, high methane concentrations (up to 1 mM) were measured in the anoxic water layer. In the oxic layer, methane concentrations were much lower and the isotopic composition shifted towards heavy carbon isotopes. Methane oxidation rates peaked at the interface between oxic and anoxic water layers at around 8–10 m depth. The electron balance between the oxidants oxygen, sulphate, and nitrate, and the reductants methane, sulphide and ammonium, matched very well in the chemocline during the stratified season. The profile of carbon isotopic composition of methane showed strong indications for methane oxidation at the chemocline (including the oxycline). Aerobic methane oxidizing bacteria were detected at the interface using fluorescence in situ hybridization. Sequencing the responsible organisms from DGGE bands revealed that aerobic methanotrophs type I closely related to Methylomonas were present. Sulphate consumption occurred at the sediment surface and, only towards the end of the stagnation period, matched with a zone of methane consumption. In any case, the flux of sulphate below the chemocline was not sufficient to oxidize all the methane and other oxidants like nitrate, iron or manganese are necessary for the observed methane oxidation. Although most of the methane was oxidized either aerobically or anaerobically, Lake Rotsee was still a source of methane to the atmosphere with emission rates between 0.2 mg CH₄ m^?2 day^?1 in February and 7 mg CH₄ m^?2 day^?1 in November.