The influence of structural organization of epilithic and endolithic lichens on limestone weathering

Hyphal penetration, mineral dissolution and neoformation at the lichen–rock interface have been widely characterized by microscopic and spectroscopic studies, and considered as proxies of lichen deterioration of stone substrates. However, these phenomena have not been clearly related to experimental data on physical properties related to stone durability, and the physical consequences of lichen removal from stone surfaces have also been overlooked. In this study, we combine microscopic and spectroscopic characterization of the structural organization of epi‐ and endolithic lichens (Caloplaca marina (Wedd.) Du Rietz, Caloplaca ochracea (Schaer.) Flagey, Bagliettoa baldensis (A.Massal.) Vězda, Porina linearis (Leight.) Zahlbr., Verrucaria nigrescens Pers.) at the interface with limestones of interest for Cultural Heritage (Portland Limestone, Botticino Limestone), with analysis of rock properties (water absorption, surface hardness) relevant for durability, before and after the removal or scraping of lichen thalli. Observations using reflected‐light and electron microscopy, and Raman analyses, showed lichen–limestone stratified interfaces, differing in the presence/absence and depth of lichen anatomical layers (lithocortex, photobiont layer, pervasive and sparse hyphal penetration component) depending on species and lithology. Specific structural organizations of lichen–rock interface were found to be associated with differential patterns of water absorption increase, evaluated by Karsten tube, in comparison with surfaces with microbial biofilms only, even more pronounced after the removal or scraping of the upper structural layers. Equotip measurements on surfaces bearing intact thalli showed lower hardness in comparison with control surfaces. By contrast, after the removal or scraping procedures, Equotip values were similar to or higher than those of controls, suggesting that the increasing open porosity may be related to a biogenic hardening process. Such counterposed patterns of porosity increase and hardening need to be considered when models relating lichen occurrence on limestones and biogeomorphological surface evolution are proposed, and to evaluate the consequences of lichen removal from stone‐built cultural heritage. Copyright © 2017 John Wiley & Sons, Ltd.     

Capturing the spatiotemporal variability of bedload transport: A time‐lapse imagery technique

Monitoring sediment transport in morphologically complex and labile channels remains a difficult task, even at the laboratory scale. To address this challenge, a fully automated imagery technique for continuously mapping the spatial and temporal variability of bedload transport is proposed. This method uses differentiated time‐lapse imagery taken from a fixed camera to detect bed variations induced by grain displacement. The technique is not based on tracking the individual particles; rather, it evaluates macroscopic colour changes within a region that contains several grains, which depend on the occurrence and intensity of the bedload transport. Image‐derived data were compared with the sediment flux measured during four flume experiments, and produced good correspondence. The method provides continuous tracking of the location of the transporting channels, and enables estimation of local variations in the magnitude of the bedload flux. Moreover, the spatial extent of the monitoring area offers an unprecedented opportunity to aggregate spatially dense and continuous data at the reach scale, as needed to properly capture the full range of variability of morphologically complex and rapidly evolving gravel‐bed rivers. Despite being limited to laboratory‐scale physical experiments, the method provides useful data to investigate fundamental morphodynamic processes such as bar migration, bank erosion, anabranches opening/closure, and the associate spatial and temporal scales. Further, the data obtained have the potential to enhance numerical model calibration and improve our understanding of the complex dynamics of real‐world settings. Copyright © 2017 John Wiley & Sons, Ltd.     

Near-fault acceleration pulses and non-acceleration pulses: Effects on the inelastic displacement ratio

Near-fault ground motions can impose particularly high seismic demands on the structures due to the pulses that are typically observed in the velocity time-histories. The velocity pulses can be further categorized into either a distinct acceleration pulse (acc-pulse) or a succession of high-frequency, one-sided acceleration spikes (non-acc-pulse). The different characteristics of velocity pulses imply different frequency content of the ground motions, potentially causing different seismic effects on the structures. This study aims to investigate the characteristics of the two types of velocity pulses and their impacts on the inelastic displacement ratio (C_R) of single-degree-of-freedom systems. First, a new method that enables an automated classification of velocity pulses is used to compile a ground motion dataset which consists of 74 acc-pulses and 45 non-acc-pulses. Several intensity measures characterizing different seismological features are then compared using the two groups of records. Finally, the influences of acc-pulses and non-acc-pulses on the C_R spectra are studied; the effects of pulse period and hysteretic behavior are also considered. Results indicate that the characteristics of the two types of velocity pulses differ significantly, resulting in clearly distinct C_R spectral properties between acc-pulses and non-acc-pulses. Interestingly, mixing acc-pulses and non-acc-pulses can lead to local “bumps” that were found in the C_R spectral shape by previous studies. The findings of this study highlight the importance of distinguishing velocity pulses of different types when selecting near-fault ground motions for assessing the nonlinear dynamic response of structures.     

The geomorphologic forcing of wild boars

Among the main invasive species, the wild boar (Sus scrofa) is the most responsible for soil degradation in Europe and many Italian regions. At the same time, the stable presence of this species in agricultural areas has induced a conflict with humans, causing economic losses, environmental degradation and also social issues. A clear quantification of the potential damages (in terms of soil bioturbation) of this species at large scale is, however, still obscure. The purpose of this research is to analyse the role of wild boars as a geomorphologic agent, presenting a general diagnostic framework regarding the geomorphic impact of this species, classifying and mapping potential sediment hotspots and their likely connection to rivers and road networks. Accordingly, a record of wild boar damage types is first presented, and their possible interaction with hydrological and geomorphological processes is described. Then, a pilot case study is discussed on mapping and quantifying wild boar damages in a hilly agricultural landscape located in northeast Italy. The wild boar damages were geolocalized using a geographical positioning system (GPS) in two years of intensive field campaigns among agricultural fields involved in wild boar damaging activities. For each damaged area (total 406), several measures of soil erosion depth were taken and the degradation surface of interest mapped for a total of 10 150 measures. The volume of removed soil was then estimated, considering the average depth of damages previously recorded. Finally, the Index of Connectivity was applied to provide a classification of the considered damages based on their connection to both river and road networks. The results indicate that the ongoing uncontrolled wild boar expansion may not affect crops only or be a risk for people, but can also increase soil erosion, with a potential connection to hydrographic networks and human infrastructures. © 2019 John Wiley & Sons, Ltd.     

Impact of a pre-existing transverse drainage system on active rift stratigraphy: An example from the Corinth Rift,Greece

Models to explain alluvial system development in rift settings commonly depict fans that are sourced directly from catchments formed in newly uplifted footwalls, which leads to the development of steep-sided talus-cone fans in the actively subsiding basin depocentre. The impact of basin evolution on antecedent drainage networks orientated close to perpendicular to a rift axis, and flowing over the developing hangingwall dip slope, remains relatively poorly understood. The aim of this study is to better understand the responses to rift margin uplift and subsequent intrabasinal fault development in determining sedimentation patterns in alluvial deposits of a major antecedent drainage system. Field-acquired data from a coarse-grained alluvial syn-rift succession in the western Gulf of Corinth, Greece (sedimentological logging and mapping) has allowed analysis of the spatial distribution of facies associations, stratigraphic architectural elements and patterns of palaeoflow. During the earliest rifting phase, newly uplifted footwalls redirected a previously established fluvial system with predominantly southward drainage. Footwall uplift on the southern basin margin at an initially relatively slow rate led to the development of an overfilled basin, within which an alluvial fan prograded to the south-west, south and south-east over a hangingwall dip slope. Deposition of the alluvial system sourced from the north coincided with the establishment of small-scale alluvial fans sourced from the newly uplifted footwall in the south. Deposits of non-cohesive debris flows close to the proposed hangingwall fan apex pass gradationally downstream into predominantly bedload conglomerate deposits indicative of sedimentation via hyperconcentrated flows laden with sand- and silt-grade sediment. Subsequent normal faulting in the hangingwall resulted in the establishment of further barriers to stream drainage, blocking flow routes to the south. This culminated in the termination of sediment supply to the basin depocentre from the north, and the onset of underfilled basin conditions as signified by an associated lacustrine transgression. The evolution of the fluvial system described in this study records transitions between three possible end-member types of interaction between active rifting and antecedent drainage systems: (a) erosion through an uplifted footwall, (b) drainage diversion away from an uplifted footwall and (c) deposition over the hangingwall dip slope. The orientation of antecedent drainage pathways at a high angle to the trend of a developing rift axis, replete with intrabasinal faulting, exerts a primary control on the timing and location of development of overfilled and underfilled basin states in evolving depocentres.     

Characterization of contrasting flow and thermal regimes in two adjacent subarctic alpine headwaters in Northwest Canada

Alpine headwaters in subarctic regions are particularly sensitive to climate change, yet there is little information on stream thermal regimes in these areas and how they might respond to global warming. In this paper, we characterize and compare the hydrological and thermal regimes of two subarctic headwater alpine streams within an empirical framework. The streams investigated are located within two adjacent catchments with similar geology, size, elevation and landscape, Granger Creek (GC) and Buckbrush Creek (BB), which are part of the Wolf Creek Research Basin in the Yukon Territory, Canada. Hydrometeorological and high-resolution stream temperature data were collected throughout summer 2016. Both sites exhibited a flow regime typical of cold alpine headwater catchments influenced by frozen ground and permafrost. Comparatively, GC was characterized by a flashier response with more extreme flows, than BB. In both sites, stream temperature was highly variable and very responsive to short-term changes in climatic conditions. On average, stream temperature in BB was slightly higher than in GC (respectively 5.8 and 5.7°C), but less variable (average difference between 75th and 25th quantiles of 1.6 and 2.0°C). Regression analysis between mean daily air and stream temperature suggested that a greater relative (to stream flow) groundwater contribution in BB could more effectively buffer atmospheric fluctuations. Heat fluxes were derived and utilized to assess their relative contribution to the energy balance. Overall, non-advective fluxes followed a daily pattern highly correlated to short-wave radiation. G1enerally, solar radiation and latent heat were respectively the most important heat source and sink, while air–water interface processes were major factors driving nighttime stream temperature fluctuations.     

Complexity‐reduction modelling for assessing the macro‐scale patterns of historical soil moisture in the Euro‐Mediterranean region

Complexity‐reduction modelling can be useful for increasing the understanding of how the climate affects basin soil moisture response upon historical times not covered by detailed hydrological data. For this purpose, here is presented and assessed an empirical regression‐based model, the European Soil Moisture Empirical Downscaling (ESMED), in which different climatic variables, easily available on the web, are addressed for simplifying the inherent complexity in the long‐time studies. To accommodate this simplification, the Palmer Drought Severity Index, the precipitation, the elevation and the geographical location were used as input data in the ESMED model for predicting annual soil moisture budget. The test area was a large region including central Europe and Mediterranean countries, and the spatial resolution was initially set at 50 km. ESMED model calibration was made according to the soil moisture values retrieved from the Terrestrial Water Budget Data archive by selecting randomly 285 grid points (out of 2606). Once parameterized, ESMED model was performed at validation stage both spatially and temporally. The spatial validation was made for the grid points not selected in the calibration stage while the comparison with the soil moisture outputs of the Global Land Data Assimilation System–NOAH10 simulations upon the period 1950–2010 was carried out for the temporal validation. Moreover, ESMED results were found to be in good agreement with a root‐zone soil moisture product obtained from active and passive microwave sensors from various satellite missions. ESMED model was thus found to be reliable for both the temporal and spatial validations and, hence, it might represent a useful tool to characterize the long‐term dynamics of soil moisture–weather interaction. Copyright © 2013 John Wiley & Sons, Ltd.     

Use of Remote Imagery to Analyse Changes in Morphology and Longitudinal Large Wood Distribution in the Blanco River After the 2008 Chaitén Volcanic Eruption,Southern Chile

The 2008 Chaitén volcanic eruption generated significant changes in the channel morphology and large wood (LW) abundance along the fluvial corridor of the Blanco River, southern Chile. Comparisons of remote sensing images from the pre‐eruption (year 2005) and post‐eruption (years 2009 and 2012) conditions showed that in a 10.2 km long study segment the Blanco River widened 3.5 times from 2005 to 2009, and that the maximum enlargement was nine times the original width. Changes in channel width were lower between the years 2012 and 2009. The sinuosity and braiding indexes also changed between 2005 and 2009. After the eruption the channel sinuosity was higher and specific river reaches developed a braided pattern, but by 2012 the channel was recovering pre‐eruption characteristics. Huge quantities of LW were introduced to the study segment; individual LW per km of channel length were 1.6 and 74.3 in 2005 and 2009, respectively, and more than 30 log jams km^?1 were observed in the year 2009. Between 2009 and 2012 the quantity of LW was very similar. Statistically significant relationships were found between the number of log jams and channel sinuosity and between the number of pieces of large wood with sinuosity and channel width. Wood was highly dynamic between 2009 and 2012: 78% of individual pieces and 48% of log jams identified in the 2009 image had moved by 2012. Finally the supervised classification of imagery associated with ArcMap tools was tested to identify large wood.