Vegetation turnover in a braided river: frequency and effectiveness of floods of different magnitude

This work addresses the temporal dynamics of riparian vegetation in large braided rivers, exploring the relationship between vegetation erosion and flood magnitude. In particular, it investigates the existence of a threshold discharge, or a range of discharges, above which erosion of vegetated patches within the channel occurs. The research was conducted on a 14 km long reach of the Tagliamento River, a braided river in north‐eastern Italy. Ten sets of aerial photographs were used to investigate vegetation dynamics in the period 1954–2011. By using different geographic information system (GIS) procedures, three aspects of geomorphic‐vegetation dynamics and interactions were addressed: (i) long‐term (1954–2011) channel evolution and vegetation dynamics; (ii) the relationship between vegetation erosion/establishment and flow regime; (iii) vegetation turnover, in the period 1986–2011. Results show that vegetation turnover is remarkably rapid in the study reach with 50% of in‐channel vegetation persisting for less than 5–6 years and only 10% of vegetation persisting for more than 18–19 years. The analysis shows that significant vegetation erosion is determined by relatively frequent floods, i.e. floods with a recurrence interval of c. 1–2.5 years, although some differences exist between sub‐reaches with different densities of vegetation cover. These findings suggest that the erosion of riparian vegetation in braided rivers may not be controlled solely by very large floods, as is the case for lower energy gravel‐bed rivers. Besides flow regime, other factors seem to play a significant role for in‐channel vegetation cover over long time spans. In particular, erosion of marginal vegetation, which supplies large wood elements to the channel, increased notably over the study period and was an important factor for in‐channel vegetation trends. Copyright © 2014 John Wiley & Sons, Ltd.     

PCBs in Central Vietnam coastal lagoons: levels and trends in dynamic environments

PCBs were analysed in surficial sediments and selected sediment cores collected between 2002 and 2008 in Central Vietnam coastal lagoons. The aim was to determine contamination levels and trends, and to evaluate the effects of anthropogenic pressures and natural events. Samples were mostly fine-grained with low total PCB concentrations (0.367-44.7 μg kg⁻¹). Atmospheric transport and post depositional processes modify to some degree the fingerprint of PCB inputs to the environment favouring the predominance of 3, 4 and 5 chlorinated congeners. The similarity of congener distributions in contemporary surficial samples also suggests the presence of a unique source over the entire study area, probably connected to mobilisation and long range transports from land-based stocks. The removal of consistent sediment layers is hypothesised based on repeated samplings of the same area. Natural meteorological events (such as typhoons) are suspected to be responsible for these sediment losses.     

Gottmann's Geographic Glossa

At a time when human geography–in its search for general and systemic laws–was often seduced by different kinds of determinism, Jean Gottmann developed his theoretical model in order to explain the political partitioning of geographical space. This model, shaped by the study of the classics in political philosophy, makes explicit reference to human psychology, and is based on a few fundamental concepts: cloisonnement (partitioning), circulation (movement), carrefour (crossroad) and iconographie (iconography). This paper presents the above mentioned concepts through a chronological analysis of their formulation in different chapters of Gottmann's bibliography, in order to reconstruct the genesis and evolution of his model. In the conclusions a few questions are presented, that suggest how Gottmann's model could still be usefully applied to contemporary human and political geography.     

First study of fault trench stratigraphy at Mt. Etna volcano, Southern Italy: understanding Holocene surface faulting along the Moscarello fault

Paleoseismology, the study of past earthquakes based on their geological record in the stratigraphy and landscape, is a successful newly developing field of research. The application of fault trench studies in volcanic environments is one of the youngest branches of paleoseismology. In this paper, we present the results of the first exploratory trenches excavated at Mt. Etna in Sicily, the largest European volcano. Modern surface faulting at Etna is a very well known feature, which poses significant hazard to the local community, both in terms of ground displacement of essential lifelines and ground shacking from frequent damaging earthquakes. However, while the geomorphology and the seismicity of the active fault in the Etna region consistently show very high rates of tectonic activity, the Holocene cumulative throw and slip-rates, along with the nature (coseismic vs. creeping fault slip), dimension and timing of the displacement events, are still poorly constrained. For this purpose, we selected as a sample area the Moscarello fault, one of the most outstanding segment of the Timpe system of active normal faults in the volcano’s lower eastern flank. Displaced landforms and volcanic units at the Fondo Macchia basin, in the central sector of this fault, indicate some hundreds of meters of vertical offset in the last ca. 80 kyr, with a long-term slip-rate substantially higher than 1.5–2.0 mm/yr. According to the historical sources and instrumental observations, the Moscarello fault ruptured four times in the last 150 years during shallow (H < 5 km) and moderate magnitude (M < 4.8) earthquakes. These events were associated with severe damage in a narrow epicentral area (macroseismic intensities up to the IX–X grade of the MSK scale) and extensive surface faulting (end-to-end rupture length up to 6 km, vertical offsets up to 90 cm). This clearly indicates very high modern rates of deformation along this fault. We conducted trench investigations at the Fondo Macchia site, in a point where eyewitnesses observed ca. 20 cm of coseismic vertical displacement after the April 21, 1971, M_s=3.7, earthquake. The excavated sections provided direct stratigraphic evidence for a vertical slip-rate of 1.4–2.7 mm/yr in the last ca. 6 kyr. This should be regarded as a minimum slip-rate for the central section of the fault. We explored a single scarp at a single site, while we know from recent historical observations that several parallel scarps may rupture coseismically at Fondo Macchia. Thus, the relevant deformation rate documented for the modern period might be likely extended back in the past to a time-span of some thousands of years at least. As expected, for such a volcanic environment, the activity rates of the Moscarello fault are also significantly higher than for the Apennines normal faults, typically showing slip-rates lower than 1 mm/yr. The agriculturally reworked trench hangingwall stratigraphy did not allow to recognize individual displacement events. Nevertheless, the sedimentary structures observed in the trench footwall strongly suggest that, as for the last 150–200 years of detailed historical record, fault behavior at Fondo Macchia is governed by coseismic surface displacement rather than fault creep. This research confirms that paleoseismology techniques can be effectively applied also in active volcanic environments, typically characterized by rheology and, consequently, seismicity and fault dynamics very different from those of other tectonic environments in which paleoseismology has been firstly developed and is today extensively applied.     

Magnetic properties and cation ordering of nanopowders of the synthetic analogue of kuramite, Cu3SnS4

An extensive characterisation of the magnetic properties of synthetic powders of kuramite, with formal composition Cu₃SnS₄, was performed. Powders were investigated through superconducting quantum interference device (SQUID) magnetometry, electron paramagnetic resonance (EPR) spectroscopy, X-ray powder diffraction (XRPD), scanning and transmission electron microscopies (SEM and TEM) and microanalysis. SEM and TEM reveal the presence of nanodimensioned particles. XRPD clearly shows that Cu₃SnS₄ crystallised in a cubic sphalerite-type structural model, in spite of the stannite-type tetragonal structure described for the natural phase. This difference arises from a full random distribution of cations. Synthetic kuramite nanopowders exhibit a marked paramagnetism, originated by the presence of Cu(II), definitely assessed by EPR measurements. Moreover, the overall magnetic behaviour of the sample cannot be simply ascribed to diluted paramagnetism, and this suggests the presence of strong superexchange interactions among Cu(II) ions even at room temperature. The main consequences of these results are the definitive assessment of the chemical formula Cu(I)₂Cu(II)SnS₄ and of a random distribution of Cu(II), Cu(I) and Sn(IV) ions within the available tetrahedral sites.     

Scaling Transition in Earthquake Sources: A Possible Link Between Seismic and Laboratory Measurements

We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M _W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M _W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M _W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M _W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M _W ~ 5.5. A representative fault slip for M _W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M _W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.     

Wavefield Migration plus Monte Carlo Imaging of 3D Prestack Seismic Data

Prestack wave‐equation migration has proved to be a very accurate shot‐by‐shot imaging tool. However, 3D imaging with this technique of a large field acquisition, especially one with hundreds of thousands of shots, is prohibitively costly. Simply adapting the technique to migrate many superposed shot‐gathers simultaneously would render 3D wavefield prestack migration cost‐effective but it introduces uncontrolled non‐physical interference among the shot‐gathers, making the final image useless. However, it has been observed that multishot signal interference can be kept under some control by averaging over many such images, if each multishot migration is modified by a random phase encoding of the frequency spectra of the seismic traces. In this article, we analyse this technique, giving a theoretical basis for its observed behaviour: that the error of the image produced by averaging over M phase encoded migrations decreases as M^?1 . Furthermore, we expand the technique and define a general class of Monte‐Carlo encoding methods for which the noise variance of the average imaging condition decreases as M^?1 ; these methods thus all converge asymptotically to the correct reflectivity map, without generating prohibitive costs. The theoretical asymptotic behaviour is illustrated for three such methods on a 2D test case. Numerical verification in 3D is then presented for one such method implemented with a 3D PSPI extrapolation kernel for two test cases: the SEG–EAGE salt model and a real test constructed from field data.