微山湖流域高氟地下水的成因分析

依据2006—2016年间采集的区内475件地下水无机分析数据以及钻探岩心易溶盐测试数据,详细研究了微山湖流域高氟地下水的分布特征和富集机制。结果表明:微山湖流域高氟地下水的分布有明显的东西分区特征,湖西冲积、湖积平原区有大范围的高氟地下水,在深度0—40 m的浅层孔隙地下水中,氟含量以1~2 mg/L为主,仅现代黄河影响带地下水氟含量小于1 mg/L,金乡、单县、嘉祥局部超过3 mg/L,最大值9.5 mg/L;在深度150—400 m的深层孔隙地下水中,氟含量以1~1.5 mg/L为主,菏泽—单县条带氟含量超过2 mg/L,最大值3.5 mg/L。微山湖东冲积、洪积平原浅层孔隙地下水、深层岩溶地下水氟含量均小于1 mg/L。湖西冲积、湖积平原沉积物中可溶性氟含量随深度增加而降低。微山湖流域湖西高氟地下水形成受物质来源、淋滤和蒸发浓缩等三方面因素共同控制,CaF_2的溶解平衡是控制地下水F–含量的重要因素。     

Advances and Issues in Luminescence Dating of Loess Deposits in Arid Central Asia

High-resolution loess deposits are widely distributed in Arid Central Asia (ACA) and provide important records associated with dust transportation, paleoenvironmental and paleoclimatic evolution. The chronology is the foundation of the research into loess deposits as an environmental archive. In recent decades, the gradually developed optical dating method has been increasingly matured and become an important approach to establishing the loess-paleosol sequences. Here, we summarized and discussed previous work on loess chronology mainly based on optical dating approach in ACA. The following understandings have been listed: ① In comparison with optical dating method, the suitable material for ¹⁴C dating is uncommon in ACA. However, the dating range of luminescence dating is more extensive, and the dating materials are accessible. Thus, the optical dating is widely applicable in the establishment of loess framework in this area. ② Until now, the quartz Single Aliquot Regeneration (SAR) method can be applied to the establishment of loess-paleosol sequence since last glacial period. But several issues remain unaddressed. For example, the Optically Stimulated Luminescence (OSL) signal sensitivity of quartz grains are low in some areas. Furthermore, the results of OSL dating of different grain sizes within a single sample are inconsistent in some areas. The solution of these problems still requires more methodological research. ③ The post-IR IRSL (pIRIR) and multiple elevated temperature stimulation (MET-pIRIR) protoCols of feldspar have basically overcome the anomalous fading issue in the traditional IRSL dating process. In ACA, the framework since MIS 7 can be established with K-feldspar luminescence dating method. Compared with quartz luminescence characteristics, the K-feldspar luminescence signals are more sensitive and exhibit a high saturation level. In specific applications, it is necessary to establish the age frame according to the luminescence sensitivity, the age of samples or other factors.     

白银厂酸性火山岩地球化学特征及成因分析

甘肃白银厂矿田是我国著名的火山成因块状硫化物矿床产地,赋矿岩石主要为酸性火山岩(石英角斑岩和石英角斑凝灰岩)。文章通过对白银厂矿区酸性火山岩的岩相学和岩石地球化学特征研究,结果表明:1)岩石发生了低绿片岩相的变质作用,镜下可见明显的绢云母化、绿泥石化等蚀变作用,造成了岩石K、Ca、Na、Rb等活泼元素的迁移;2)岩石具有高硅、低钛、弱铝、贫镁,亏损高场强元素Nb、Ta,以及明显的Sr、P、Ti、Eu的负异常和Th、U、Pb正异常特征,表明本区酸性火山岩可能为下地壳基性岩重熔的产物,源区存在斜长石、磷灰石以及钛铁矿等矿物的残留,并且岩浆在演化过程中经历过围岩的混染与弱的分离结晶作用;3)结合北祁连的区域构造演化、岩浆活动以及本区火山岩的年代学资料,认为该酸性火山岩可能处于由岛弧向弧后盆地过渡的环境中。     

川滇黔邻区龙马溪组页岩气富集主控因素与勘探方向

中国的页岩气资源评价必须立足于中国主要陆块的地质条件与构造演化特点之上,对于不同层系、不同地区的页岩气选区评价,也必须抓住关键因素。川滇黔邻区的五峰组-龙马溪组富有机质页岩发育,但保存条件较渝东南地区更为复杂。印支期以来,该区经历了多期次构造应力场转换,断裂、褶皱发育,因此,建立针对性的页岩气选区评价参数体系是该区页岩气勘探走出困局的当务之急。本文在分析该区已有页岩气钻井成效的基础上,立足于扬子海相层系页岩气勘探应是基于保存条件的"连续型甜点区"的选区评价基本思路,结合前人研究成果,系统梳理出一套评价指标体系。该体系涵盖5大因素(区域盖层、直接盖层、底板条件、页岩层自身条件、构造改造强度)、4个等级、17个选区评价参数。另外,根据已有相关钻井数据,总结提出了5个页岩气层评价表征参数(含气量、孔隙度、电阻率、氮气组分含量和压力系数)。根据该指标体系,对川滇黔邻区的主要构造单元进行了梳理分析,优选出5个有利区,提出了各有利区的首选可能突破点。本研究对复杂构造区页岩气有利区带优选具有一定的指导意义。     

同震地表位移的单站时间基线模型解算

针对强震时GPS双差相对定位精度受参考站位移的影响,而精密单点定位数据处理过程又相对复杂等问题,该文采用单站时间基线模型解算实时同震地表位移。依据短时间内对流层延迟等误差强相关和模糊度固定不变的特性,利用消电离层星间单差观测值,并对卫星钟差进行改正,建立时间基线差分解算模型。实验结果表明,本文方法所得测站位移结果与SOPAC解的互差的均方根误差在N、E、U这3个方向上分别为5.4、4.1和12.2mm,基于单站的处理方法,该文所得结果比SOPAC解更准确地反映地震期间地表运动。     

改进粒子滤波器的室内地磁匹配精度研究

针对粒子滤波算法在室内地磁分布的连续性变化中会发生滤波发散,加之算法中重采样步骤使该现象恶化,直接导致室内定位过程中目标丢失的问题。该文受Hausdorff距离度量法中点集匹配思想的启发,提出了一种利用初定位误差作为最大粒子匹配距离的约束思想,通过缩小匹配空间的区域范围的方法来解决传统算法的发散问题。最后实验表明,此方法解决了粒子滤波器在地磁匹配中出现的滤波发散现象,同时使得定位结果更加快速收敛。     

GPS RTK在异形建筑物放样中的应用

针对异形建筑物传统施工放样过程操作复杂、效率低下的问题,该文提出了采用GPS RTK进行异性建筑物施工中的放样工作。以天津市文化中心商业项目为例,利用GPS RTK技术分别对建筑物的主轴线和异形次轴线进行了放样工作,并与全站仪在放样过程和数据精度两个方面进行了对比分析,实现了异型建筑物快速、高效的施工放样。实验结果表明,GPS RTK技术不仅在放样过程中操作简单,节约资金,而且放样精度满足工程要求,相对全站仪来说具有很大优势,有助于提高复杂异形建筑物的施工放样效率。     

Improved decentralized multi-sensor navigation system for airborne applications

The integration of Global Navigation Satellite System (GNSS) and Inertial Navigation System (INS) technologies is a very useful navigation option for high-accuracy positioning in many applications. However, its performance is still limited by GNSS satellite availability and satellite geometry. To address such limitations, a non-GNSS-based positioning technology known as “Locata” is used to augment a standard GNSS/INS system. The conventional methods for multi-sensor integration can be classified as being either in the form of centralized Kalman filtering (CKF), or decentralized Kalman filtering. However, these two filtering architectures are not always ideal for real-world applications. To satisfy both accuracy and reliability requirements, these three integration algorithms—CKF, federated Kalman filtering (FKF) and an improved decentralized filtering, known as global optimal filtering (GOF)—are investigated. In principle, the GOF is derived from more information resources than the CKF and FKF algorithms. These three algorithms are implemented in a GPS/Locata/INS integrated navigation system and evaluated using data obtained from a flight test. The experimental results show that the position, velocity and attitude solution derived from the GOF-based system indicate improvements of 30, 18.4 and 20.8% over the CKF- and FKF-based systems, respectively.