Channel systems and lobe construction in the Mississippi Fan

Morphological features on the Mississippi Fan in the eastern Gulf of Mexico were mapped using GLORIA II, a long-range side-scan sonar system. Prominent is a sinuous channel flanked by well-developed levees and occasional crevasse splays. The channel follows the axis and thickest part of the youngest fan lobe; seismic-reflection profiles offer evidence that its course has remained essentially constant throughout lobe development. Local modification and possible erosion of levees by currents indicates a present state of inactivity. Superficial sliding has affected part of the fan lobe, but does not appear to have been a factor in lobe construction.     

Germanium-silicon fractionation in the weathering environment

We present a detailed study of germanium behavior in the soil weathering environment as an important step toward using the Ge/Si system as a tracer of silicate weathering processes in both modern and ancient environments. Intensely weathered soils developed on Hawaiian basalts have bulk soil Ge/Si ratios 2 to 10 times higher than fresh basalt (e.g., 10 to 25 μmol/mol vs. 2.5 μmol/mol). Soil Ge concentrations increase with Si, and decrease with Fe, suggesting that Ge sequestration is related to accumulation of secondary soil silicates, rather than retention in soil Fe oxy-hydroxides. Sequential extractions of these soils suggest that Ge/Si fractionation takes place by Ge sequestration during the initial precipitation of secondary soil aluminosilicates (principally allophane). Further Si loss and changes in mineralogy as these soils age result in little additional Ge/Si fractionation. Ge/Si ratios in granitic soils and saprolites are strongly influenced by relative weathering rates of primary minerals. Kaolinite has a Ge/Si ratio (5.9 μmol/mol) higher than the plagioclase from which it forms (3.1 μmol/mol), whereas accumulation of primary quartz (Ge/Si 0.5 μmol/mol) prevents granitic soils from attaining high Ge/Si ratios. Laboratory synthesis of allophane confirms that Ge is preferentially partitioned into the solid phase upon precipitation of secondary aluminosilicates from solution.     

Crack Initiation, Propagation and Coalescence in Rock-Like Material Containing Two Flaws: a Numerical Study Based on Bonded-Particle Model Approach

Cracking and coalescence behavior in a rectangular rock-like specimen containing two parallel (stepped and coplanar) pre-existing open flaws under uniaxial compression load has been numerically studied by a parallel bonded-particle model, which is a type of bonded-particle model. Crack initiation and propagation from two flaws replicate most of the phenomena observed in prior physical experiments, such as the type (tensile/shear) and the initiation stress of the first crack, as well as the coalescence pattern. Eight crack coalescence categories representing different crack types and trajectories are identified. New coalescence categories namely “New 1” and “New 2”, which are first observed in the present simulation, are incorporated into categories 3 and 4, and category 5 previously proposed by the MIT Rock Mechanics Research Group, respectively. The flaw inclination angle (β), the ligament length (L) (spacing between two flaws) and the bridging angle (α) (inclination of a line linking up the inner flaw tips, between two flaws) have different effects on the coalescence patterns, coalescence stresses (before, at or post the peak stress) as well as peak strength of specimens. Some insights on the coalescence processes, such as the initiation of cracks in the intact part of specimens at a distance away from the flaw tips, and coalescence due to the development and linkage of a number of steeply inclined to vertical macro-tensile cracks are revealed by the present numerical study.     

The missing Myopus: plugging the gaps in Late Pleistocene small mammal identification in western Europe with geometric morphometrics

Lemmus and Myopus are two lemming species with distinct habitat requirements but which show very similar dental morphologies. They are thus extremely difficult to distinguish from one another in the fossil record on the basis of their dental remains, leading to poor understanding of the palaeobiogeographical evolution of Myopus as well as inaccurate palaeoenvrionmental reconstructions. Currently, the presence of Myopus in the fossil register from the Pleistocene is still debated and no firm occurrence of this lemming in western Europe has yet been confirmed for the Late Pleistocene. In this paper, we used geometric morphometrics on modern material to establish morphological differences between Lemmus and Myopus teeth (first lower and third upper molars). Morphological data were then used to build a robust linear discriminant model able to confidently classify isolated teeth of these two genera, and finally, linear discriminant models were used on fossil remains of Lemmus/Myopus from two Late Pleistocene archaeological/palaeontological sites (Grotte des Gorges and Gully Cave). This study demonstrates, for the first time, the presence of Myopus schisticolor in west European Late Pleistocene sites between the end of Marine Isotope Stage 3 and the beginning of the Holocene, during climatic events that favoured the development of taiga forest of birch and pine in these regions.     

Permeability upscaling of fault zones in the Aztec Sandstone,Valley of Fire State Park,Nevada, with a focus on slip surfaces and slip bands

The effect of open and filled slip surfaces on the upscaled permeability of two fault zones with 6 and 14 m strike-slip in an eolian Aztec Sandstone, Nevada, USA is evaluated. Each fault zone is composed of several fault components: a fault core, bounded by filled through-going slip surfaces referred to as slip bands, and a surrounding damage zone that contains joints and deformation bands. Slip band geometry, composition, and petrophysical properties are characterized. Measurements and modeling show that slip band permeabilities can vary over 12 orders of magnitude depending on the degree of fill within the slip bands. The slip bands along with other fault zone components are represented in finite volume numerical calculations and the impact of various slip-band representations on upscaled fault zone permeability is tested. The results show 2 orders of magnitude variation in upscaled fault zone permeability in the fault-normal direction and a factor of 2 variation in the fault-parallel direction. The numerical results presented here are compared to the earlier numerical results in which structured Cartesian grids were used for the numerical simulations, and are in qualitative agreement with earlier calculations but use about a factor of 250–400 fewer numerical cells.     

Seasonal and spatial distribution of particulate organic matter (POM) in the Chukchi and Beaufort Seas

As part of the Western Arctic Shelf–Basin Interactions (SBI) project, the production and fate of organic carbon and nitrogen from the Chukchi and Beaufort Sea shelves were investigated during spring (5 May–15 June) and summer (15 July–25 August) cruises in 2002. Seasonal observations of suspended particulate organic carbon (POC) and nitrogen (PON) and large-particle (>53 μm) size class suggest that there was a large accumulation of carbon (C) and nitrogen (N) between spring and summer in the surface mixed layer due to high phytoplankton productivity. Considerable organic matter appeared to be transported from the shelf into the Arctic Ocean basin in an elevated POC and PON layer at the top of the upper halocline. Seasonal changes in the molar carbon:nitrogen (C:N) ratio of the suspended particulate organic matter (POM) pool reflect a change in the quality of the organic material that was present and presumably being exported to the sediment and to Arctic Ocean waters adjacent to the Chukchi and Beaufort Sea shelves. In spring, low particulate C:N ratios (<6; i.e., N rich) were observed in nitrate-replete surface waters. By the summer, localized high particulate C:N ratios (>9; i.e., N-poor) were observed in nitrate-depleted surface waters. Low POC and inorganic nutrient concentrations observed in the surface layer suggest that rates of primary, new and export production are low in the Canada Basin region of the Arctic Ocean.     

Egg capsule hatch rate and incubation duration of the California market squid,Doryteuthis (= Loligo) opalescens: insights from laboratory manipulations

Egg capsules of the squid Doryteuthis (= Loligo) opalescens were reared in the laboratory to assess the dependence of time‐to‐hatching (incubation time) and hatching success rate on temperature and light regime. Both incubation time and hatch duration were found to be inversely related to temperature. More than 96% of paralarvae hatch from eggs reared at temperatures between 9 and 14 °C. Hatch rate drops below 90% in warmer and colder water. No eggs hatch below 7 °C, and the upper limit of viability is near 25 °C. The vast majority (91%) of hatchlings emerged during the dark phase of the photoperiod. Egg capsules reared at 13.4 °C with a supposedly commensal polychaete, Capitella ovincola, had a slightly higher hatch rate than those without the annelid. Because eggs are naturally laid closely together, crowding was hypothesized to cause decreased ventilation and a lower hatch rate. Crowding was tested by placing two capsules (rather than one) into the small incubation chambers (50 ml). This treatment did not result in a lower hatch rate at 13.4 °C, but at 21.4 °C it decreased the hatch rate by 20%. Brood incubation duration is related to temperature by the equation: Incubation (days) = 14.97 + 177.40 × exp(?0.119 × Temperature –°C) (χ² = 282.5, P = 0.001). Stable isotope analysis confirmed that C. ovincola worms eat the capsule matrix, not the paralarvae. These polychaetes had a δ¹⁵N value of 12.79‰versus 12.06‰ for squid paralarvae, and 10.54‰ for the gelatinous matrix of egg capsules. This fractionation factor ε of 2.25‰ is consistent with marine food webs. Provision of nutrients and shelter for the annelids and increased hatch rate for the squid embryos suggests a symbiotic relationship between these organisms.     

Estimation of spawning habitats of market squid (Doryteuthis opalescens) from field surveys of eggs off Central and Southern California

Like many other loliginid squid, Doryteuthis (Loligo) opalescens deposits egg cases on the ocean floor. Depending upon temperature, egg cases may persist for 5–12 weeks before the paralarvae hatch. Because of this relatively long duration and squid’s pelagic life history, egg cases provide a practical life stage to survey. During 2001–2002, squid egg beds in Monterey Bay, Carmel Bay, and around the California Channel Islands were surveyed using a remotely operated vehicle with the goal of delineating the habitat of egg beds that are spawned during active commercial fishing. Egg cases were highly aggregated and densities reached 1338 capsules m⁻². Squid eggs were significantly shallower in Central California. Egg cases occurred between 20 and 93 m around the Channel Islands, and in Central California they were between 13 and 61 m. The temperatures in both regions were similar (10–12 °C), with some eggs in Southern California found up to 14.4 °C. Ninety-five percent of eggs were found on sand, suggesting that temperature and substrate are stronger behavioral cues than depth to stimulate spawning. Suitable spawning habitat was defined by three criteria: sandy benthic substrate, temperatures between 10 and 14.4 °C, and depths between 20 and 70 m when the first two criteria hold. Additionally, within this defined area, oxygen concentration is quantified. The greatest commercial landings of market squid occur in both Central and Southern California during a time of year when water temperatures of 10–12 °C are prevalent in the 20–70 m depth range.     

Datation par la méthode U/Th d'un travertin quaternaire du Sud-Est marocain : implications paléoclimatiques pendant le Pléistocène moyen et supérieur

A large travertine outcrop south of Errachidia, southern Morocco, was studied and U/Th dated. The carbonate fraction was provided by groundwaters then, as now, from the eastern High Atlas percolating through the regional Infra-Cenomanian aquifer. There were two main periods of accumulation at ca 262 kyr BP and 20–11.5 kyr BP separated by a long discontinuity with some limited weathering and erosion and correlated in part with a period of erosion at 30–20 kyr BP further to the west. The two travertine-deposition periods suggest increased rainfall and/or cooler thermal conditions in the eastern High Atlas source regions. Massive travertine accumulation ceased at the end of the Upper Pleistocene. To cite this article: L. Boudad et al., C. R. Geoscience 335 (2003).To cite this article: L. Boudad et al., C. R. Geoscience 335 (2003).     

Rayleigh waves in a medium with an undulated surface

A numerical method is developed which can be used to determine the characteristics of Rayleigh wave propagation in a homogeneous medium where, at each surface point, the radius of curvature is large compared to the wavelength of Rayleigh waves. This method is deduced from experimental results on seismic modeling of some simple cases.In the general case we compute two effects of surface topography on the Rayleigh waves: a dispersion and attenuation of the waves due to the whole path and a local modulation of the displacement components depending on the local curvature. Therefore, both effects are not to be neglected in the case of precise measurement of the velocities and of the amplitudes from which the attenuation factor is carried out.