Effect of the Dry Ashing Method on Cadmium Isotope Measurements in Soil and Plant Samples

A dry ashing method is commonly used to remove organic material from samples prior to geochemical analysis. In the course of this study, the Cd isotope ratios of a series of soil and plant reference materials and samples were studied to evaluate the effect of the dry ashing method on measurement results of Cd isotope ratios. The samples were pre‐treated using the dry ashing method and high‐pressure bomb for comparison. The results show that the digestion using high‐pressure bombs did not lead to Cd loss, but using the dry ashing method would cause different proportions of Cd loss. The whole range of Cd isotope difference between two methods was from ?0.07‰ to 3.01‰. There was also an obvious difference in measured Cd isotope ratios from the same leaf sample pre‐treated independently by the dry ashing method, indicating that the amount of Cd loss and the effect on Cd isotope measurement during dry ashing is related to the properties of the samples. Therefore, dry ashing may not be appropriate for the removal of organic material in Cd isotope ratio measurement, especially for samples with high organic contents. The δ^114/110Cd values of reference materials NIST SRM 1573a and GSD‐30 are reported for the first time in this study.     

Numerical characterization of slope rock mass through considerations of hydraulic and mechanical properties

Landslides - In this paper, the slope rock mass is numerically characterized by considering hydraulic and mechanical properties using two distinct element models. The flow rate and permeability are...     

Failure mechanisms and dynamics of the Shanzao rockslide in Yongjia County,China on 10 August 2019

Landslides - At about 04:00 on 10 August 2019, the heavy rainfall carried by Typhoon Lekima induced a catastrophic rockslide in Shanzao Village, Yongjia County, China. The heavy rainfall triggered...     

Movement process analysis of the high-speed long-runout Shuicheng landslide over 3-D complex terrain using a depth-averaged numerical model

Landslides - Flow-like landslide is one of the most catastrophic types of natural hazards due to its high velocity and long travel distance. In 2019, a large catastrophic landslide was triggered by...     

A three-dimensional large-deformation random finite-element study of landslide runout considering spatially varying soil

Landslides - Landslide is a uniquely dynamic large-deformation process that can present serious threat to human lives and infrastructures. The natural soil properties often exhibit inherent spatial...     

四川盆地东部中二叠统茅口组热液活动特征

四川盆地中二叠统茅口组存在丰富的热液流体活动。在野外剖面和岩心观察的基础上,利用多种分析测试方法,对四川盆地东部茅口组碳酸盐岩中的热液活动特征进行了探讨。研究区茅口组热液活动包括2类,一类为硅质热液,表现为薄层硅质岩或硅质团块;另一类为碳酸盐型热液,表现为粗晶方解石和白云石充填在张性构造裂缝中或呈"雪片状"集合体,偶见少量黄铁矿、闪锌矿等金属硫化物伴生。硅质岩主量元素之间的关系表明硅质来源具有多样性,是热液硅与壳源硅的混合;黄铁矿、闪锌矿原位S同位素δ34S介于-3.91‰~-6.87‰之间,推测可能受到了微生物和基性岩浆岩的双重影响;方解石脉和具鞍状双晶的白云石脉普遍具有Ca O高于标准计量、相对富Sr和U、贫REE和Ti、Ce/Ce*明显负异常、Eu/Eu*主体正异常、Y正异常等特征,表明碳酸盐脉为热液活动的产物,流体来源也呈现出火山活动相关流体与富钙地下水混合的特点。闪锌矿富集Ge和Cd,Zn/Cd及Zn/Fe值反映了中等成矿温度。硅质岩和碳酸盐流体包裹体均一温度变化范围较大,介于54.7~294.3℃之间,与稀土元素和微量元素比值所揭示的特征吻合。研究结果表明,穿层状硅质结核和团块的首次出现往往标志着茅口组热液活动的开始,而张性构造裂缝和碳酸盐型热液活动带来的围岩白云化作用则有效地改善了白云岩储集层的物性。     

豫西宜阳上二叠统孙家沟组孢粉组合及其地质意义*

豫西宜阳上二叠统孙家沟组为一套陆相碎屑岩,在该组中部土门段砂泥互层中发现大量的植物化石碎片和孢粉化石。文中依据孙家沟组沉积特征及孢粉组合区域对比,厘定了土门段的地质时代,并依据孢粉化石的亲缘植物关系和信息函数,结合微量元素Sr/Cu值指标,定性和半定量分析了宜阳地区的古气候特征。结果显示: 土门段共发现52属孢粉化石,以裸子植物花粉占优势,与华北地区晚二叠世孢粉组合特征有很大的相似性,推测其地质时代相当于晚二叠世长兴期。孢粉化石属种的植物亲缘关系与欧美镁灰岩统植物成分类似,表明整体上为较炎热的半干旱古气候。该成果可为华北地区晚二叠世晚期的陆相沉积环境、古植物背景以及古气候演化研究提供参考依据。     

基于孔压静力触探的岩土参数正态性检验方法对比

岩土参数的正态分布是岩土工程可靠分析的基本假定之一。目前,岩土工程参数的正态性检验以KS （Kolmogorov-Smirnov）检验为主,然而诸多研究表明,对于小样本数据,KS检验的正态性检验结果并不可靠。本文以废黄河泛滥沉积相粉土中的孔压静力触探（CPTU）锥尖阻力q_t数据为研究对象,首先采用ANOVA （方差分析）检验,从CPTU测试资料中进行总体的样本筛选,然后应用SW （Shapiro-Wilk）检验、KS检验、LF （Lilliefors）检验和AD （Anderson-Darling）检验等4种正态性检验方法,在不同样本容量条件下,对测试数据进行正态性检验评价。当测试数据的样本容量充足时,分析结果表明：SW检验结果最为严格,KS检验结果最不保守,而LF检验和AD检验的严格性介于两者之间;对于常规岩土工程设计,采用KS检验结果即可满足稳定性分析要求,对于复杂岩土工程设计,采用SW检验对设计参数进行正态性检验,可降低设计的不确定性。     

普朗斑岩型铜矿床成矿元素多重分形特征及其矿化强度指示

成矿元素品位的变化受控于长期地质作用过程,具有较强的非线性特征,定量刻画其变化特征有助于深入理解成矿过程,并为找矿预测提供理论依据。运用多重分形去趋势移动均值（MFDMA） 法,分析云南普朗斑岩型铜矿床4号勘探线钻孔Cu元素品位的多重分形特征及其对矿化强度的指示意义。结果显示：所有钻孔Cu元素品位具有多重分形特征,且不同矿化等级的元素分布存在局部奇异性差异,多重分形强度随矿化强度等级减弱而增加;这些特征指示在钾硅化带—带内侧强矿化钻孔的高品位相对聚集,而带外侧角岩化—青磐岩化带的高品位相对分散;通过数据随机重排技术推测Cu品位多重分形结构奇异性差异是由其分布概率密度和长相关性共同作用引起,后者的作用贡献大于前者。     

基于三维激光扫描技术的岩质边坡泥化夹层空间分布和几何形态

为了定量研究泥化夹层的空间分布和几何形态,以云南省玉溪市生活垃圾焚烧发电厂高边坡局部开挖剖面为对象,利用徕卡ScanStation C10三维激光扫描仪和瑞典ROMER RA-7520-2六轴关节臂三维测量仪进行扫描,得到了开挖剖面和泥化夹层的原始点云数据;然后采用Cyclone和Geomagic Wrap软件对点云数据进行一系列处理,分析了泥化夹层的三维空间分布、层面产状、间距、层面粗糙度和几何形态。结果表明：大部分泥化夹层横向分布于整个扫描剖面,少数呈局部分布;泥化夹层的平均倾向为196.41°±5.51°,平均倾角为22.27°±2.23°,间距在3.7~49.1 cm之间,平均值为（20.4±12.0）cm;不同层位及同一层位不同横向位置的泥化夹层厚度都不等,最厚约20 mm,最薄小于1 mm;泥化夹层顶面局部典型区域的平面拟合偏差在-22.4~32.5 mm之间,沿夹层倾向的粗糙度系数在5.67~16.77之间,平均值为10.11±3.25;泥化夹层的表面积与体积之比在5.14~5.86 cm^-1之间。运用三维激光扫描技术研究泥化夹层的空间分布和几何形态是可行的。玉溪市生活垃圾焚烧发电厂高边坡的泥化夹层具有宏观整体上相对平直、相互近似平行、非等距分布、间距小、层数多、厚度薄,细观上顶面粗糙底面相对光滑、三维形态复杂的特点。