Contribution of phytoliths to total biogenic silica volumes in the tropical rivers of Malaysia and associated implications for the marine biogeochemical cycle

The contribution of phytoliths to total biogenic silica (BSi) volumes in rivers worldwide, and the associated implications for the biogeochemical cycle, require in-depth study. Based on samples from rivers in Peninsular Malaysia, this project investigated the source and characteristics of BSi found in Asian tropical rivers, as well as the process of reverse weathering taking place in these fluvial systems. Results indicated that BSi samples collected in sediments consisted of phytolith, diatom and sponge spicules. Phytoliths, predominantly of the elongate form, comprised 92.8%–98.3% of BSi in the Pahang River. Diatom BSi in this river consisted mainly of pennatae diatoms, but represented a relatively small proportion of the total BSi volume. However, diatom BSi (predominantly of the Centricae form) was more prevalent in the Pontian and Endau Rivers with shares of 68.8% and 79.3% of the total BSi volumes, respectively, than Pahang River. Carbon contents of the BSi particulates ranged from 1.85% to 10.8% with an average of 4.79%. These values are higher than those recorded in other studies to date, and indicate that BSi plays a major role in controlling permanent carbon burial. This study suggests that phytoliths from terrestrial plants are the primary constituents of BSi in the rivers of Peninsular Malaysia, and therefore represent a significant proportion of the coastal silica budget.     

Significant population genetic structure detected in the rock bream <Emphasis Type="Italic">Oplegnathus fasciatus</Emphasis> (Temminck &amp; Schlegel, 1844) inferred from fluorescent-AFLP analysis

Oplegnathus fasciatus (rock bream) is a commercial rocky reef fish species in East Asia that has been considered for aquaculture. We estimated the population genetic diversity and population structure of the species along the coastal waters of China using fluorescent-amplified fragment length polymorphisms technology. Using 53 individuals from three populations and four pairs of selective primers, we amplified 1 264 bands, 98.73% of which were polymorphic. The Zhoushan population showed the highest Nei’s genetic diversity and Shannon genetic diversity. The results of analysis of molecular variance (AMOVA) showed that 59.55% of genetic variation existed among populations and 40.45% occurred within populations, which indicated that a significant population genetic structure existed in the species. The pairwise fixation index F _st ranged from 0.20 to 0.63 and were significant after sequential Bonferroni correction. The topology of an unweighted pair group method with arithmetic mean tree showed two significant genealogical branches corresponding to the sampling locations of North and South China. The AMOVA and STRUCTURE analyses suggested that the O. fasciatus populations examined should comprise two stocks.     

An integrative study of larval organogenesis of American shad <Emphasis Type="Italic">Alosa sapidissima</Emphasis> in histological aspects

We describe organogenesis at a histological level in American shad (Alosa sapidissima) larvae from 0 until 45 days after hatching (DAH). Larval development was divided into four stages based on the feeding mode, external morphological features, and structural changes in the organs: stage 1 (0–2 DAH), stage 2 (3–5 DAH), stage 3 (6–26 DAH) and stage 4 (27–45 DAH). At early stage 2 (3 DAH), American shad larvae developed the initial digestive and absorptive tissues, including the mouth and anal opening, buccopharyngeal cavity, oesophagus, incipient stomach, anterior and posterior intestine, differentiated hepatocytes, and exocrine pancreas. The digestive and absorptive capacity developed further in stages 2 to 3, at which time the pharyngeal teeth, taste buds, gut mucosa folds, differentiated stomach, and gastric glands could be observed. Four defined compartments were discernible in the heart at 4 DAH. From 3 to 13 DAH, the excretory systems started to develop, accompanied by urinary bladder opening, the appearance and development of primordial pronephros, and the proliferation and convolution of renal tubules. Primordial gills were detected at 2 DAH, the pseudobranch was visible at 6 DAH, and the filaments and lamellae proliferated rapidly during stage 3. The primordial swim bladder was first observed at 2 DAH and started to inflate at 9 DAH; from then on, it expanded constantly. The spleen was first observed at 8 DAH and the thymus was evident at 12 DAH. From stage 4 onwards, most organs essentially manifested an increase in size, number, and complexity of tissue structure.     

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。     

The morphological characteristics of gully systems and watersheds in Dry-Hot Valley,SW China

Gully systems and watersheds are geomorphic units with clear boundaries that are relatively independent of basin landscapes and play an important role in natural geography. In order to explore the morphological characteristics of gully systems and watersheds in the Dry-Hot Valley [South West (SW) China], gullies are interpreted from online Google images with high resolution and watersheds are extracted from digital elevation model at a scale of 1:50,000. The results show that: (1) There are 17,382 gullies (with a total area of 1141.66 km²) and 42 watersheds in the study area. (2) The average gully density of the study area (D) is 4.29 km/km², gully frequency (F) is 14.39 gullies/km², the branching ratio (B) is 5.13, the length ratio (L) is 3.12, and the coefficient of the main and tributary gullies (M) is 0.06. The degree of gully erosion is strong to extremely strong, the main development intensity of gully erosion ranges from intense to moderate, and the type of gully system is tributary. (3) The watershed areas (A) are between 0.39 and 96.43 km², the relief ratio (R) is from 0.10 to 0.19, the circularity ratio (C) is from 0.30 to 0.83, the texture ratio (T) is from 0.82 to 39.35, and the dominant geomorphological texture type is fine. (4) There is a quantitative relationship between F and D:F?=?0.624D² (R?=0.84) and T is closely related to D, F, M (R²?>?0.7). A, R and C are related to M (R²?>?0.5). The development of gully systems is the result of coupling effects between multiple factors. In this area, the degree of erosion and the condition of the main and tributary gullies can be controlled by the degree of topographic breakage in the watershed, which provides some theoretical basis for the evaluation of gully erosion by the latter. In addition, the scale, relief, and shape have a significant impact on the locations of the main and tributary gullies. For tributary gullies, attention should be paid to the interception and control of runoff and sediment in the small confluence branches in order to prevent gully expansion and head advance. These features can inform the development of targeted measures for the control of soil erosion.     

Theoretical calculation of equilibrium Mg isotope fractionation between silicate melt and its vapor

Isotope fractionation during the evaporation of silicate melt and condensation of vapor has been widely used to explain various isotope signals observed in lunar soils, cosmic spherules, calcium–aluminum-rich inclusions, and bulk compositions of planetary materials. During evaporation and condensation, the equilibrium isotope fractionation factor (α) between high-temperature silicate melt and vapor is a fundamental parameter that can constrain the melt’s isotopic compositions. However, equilibrium α is difficult to calibrate experimentally. Here we used Mg as an example and calculated equilibrium Mg isotope fractionation in MgSiO₃ and Mg₂SiO₄ melt–vapor systems based on first-principles molecular dynamics and the high-temperature approximation of the Bigeleisen–Mayer equation. We found that, at 2500 K, δ²⁵Mg values in the MgSiO₃ and Mg₂SiO₄ melts were 0.141?±?0.004 and 0.143?±?0.003‰ more positive than in their respective vapors. The corresponding δ²⁶Mg values were 0.270?±?0.008 and 0.274?±?0.006‰ more positive than in vapors, respectively. The general \(\alpha - T\) equations describing the equilibrium Mg α in MgSiO₃ and Mg₂SiO₄ melt–vapor systems were: \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.264 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\) and \(\alpha_{{{\text{Mg}}\left( {\text{l}} \right) - {\text{Mg}}\left( {\text{g}} \right)}} = 1 + \frac{{5.340 \times 10^{5} }}{{T^{2} }}\left( {\frac{1}{m} - \frac{1}{{m^{\prime}}}} \right)\), respectively, where m is the mass of light isotope ²⁴Mg and m′ is the mass of the heavier isotope, ²⁵Mg or ²⁶Mg. These results offer a necessary parameter for mechanistic understanding of Mg isotope fractionation during evaporation and condensation that commonly occurs during the early stages of planetary formation and evolution.