Defending against wormhole attack in OLSR

OLSR (optimal link state routing) is one of the four basic routing protocols used in mobile ad hoc Networks by the MANET working group of IETF (Internet engineering task force). OLSR, a proactive routing protocol, is based on a multipoint relaying flooding technique to reduce the number of topology broadcast. OLSR uses periodic HELLO packets to neighbor detection. As introduced in Reference [1], the wormhole attack can form a serious threat in wireless Networks, especially against many ad hoc Network routing protocols and location-based wireless security systems. Here, a trust model to handle this attack in OLSR is provided and simulated in NS2.     

Using 4C OBS to reveal the distribution and velocity attributes of gas hydrates at the northern continental slope of South China Sea

To investigate the distribution and velocity attributes of gas hydrates in the northern continental slope of South China Sea, Guangzhou Marine Geological Survey conducted four-component (4C) ocean-bottom seismometer (OBS) surveys. A case study is presented to show the results of acquiring and processing OBS data for detecting gas hydrates. Key processing steps such as repositioning, reorientation, PZ summation, and mirror imaging are discussed. Repositioning and reorientation find the correct location and direction of nodes. PZ summation matches P- and Z-components and sums them to separate upgoing and downgoing waves. Upgoing waves are used in conventional imaging, whereas downgoing waves are used in mirror imaging. Mirror imaging uses the energy of the receiver ghost reflection to improve the illumination of shallow structures, where gas hydrates and the associated bottom-simulating reflections (BSRs) are located. We developed a new method of velocity analysis using mirror imaging. The proposed method is based on velocity scanning and iterative prestack time migration. The final imaging results are promising. When combined with the derived velocity field, we can characterize the BSR and shallow structures; hence, we conclude that using 4C OBS can reveal the distribution and velocity attributes of gas hydrates.     

西部开发过程中土地利用控制的必要性及措施

从西部开发的历史经验与教训、土地利用的不合理现状等方面，阐述国家在实施西部地区大开发战略中加强土地利用控制的必要性及其重要意义。在此基础上，提出土地利用控制的目标与任务。分析了对西部经济发展、自然生态环境建设与保护等密切相关的耕地、林地和草地等在土地利用与控制中存在的问题，进而提出相应的土地利用控制措施与对策。     

Oil source analysis of Upper Tertiary Shawan Formation in Chepaizi area,in the northwest margin of Junggar basin

Well che89, located in the Chepaizi area in the northwest margin of Junggar basin, acquires high production industrial oil flow, which is an important breakthrough in the exploration of the south foreland slope area of Junggar basin. The Chepaizi area is near two hydrocarbon generation depressions of Sikeshu and Shawan, which have sets of hydrocarbon source rock of Carboniferous to Jurassic as well as Upper Tertiary. Geological and geochemical parameters are proper for the accumulation of mixed source crude oil. Carbon isotope, group composition and biomarkers of crude oil in Upper Tertiary of well Che89 show that the features of crude oil in Upper Tertiary Shawan Formation are between that of Permian and Jurassic, some of them are similar to these two, and some are of difference, they should be the mixed source of Permian and Jurassic. Geochemical analysis and geological study show that sand extract of Lower Tertiary Wulunguhe Formation has the same source as the crude oil and sand extract of Upper Tertiary Shawan Formation, but they are not charged in the same period. Oil/gas of Wulunguhe Formation is charged before Upper Tertiary sedimentation, and suffered serious biodegradation and oxidation and rinsing, which provide a proof in another aspect that the crude oil of Upper Tertiary Shawan Formation of well Che89 is not from hydrocarbon source rock of Lower Tertiary.

     

P507负载泡塑反相色层富集岩石中的稀土元素

研究了Ｐ５０７负载泡塑萃取柱色谱分离富集稀土元素的条件,并与Ｐ５０７萃淋树脂柱进行了对比;拟定了Ｐ５０７负载泡塑反相色属富集岩石中稀土元素的方法。在ｐＨ２．５介质中ＲＥＥ上柱率９８％,用５０ｍｌ２．５ｍｏｌ／ＬＨＮＯ３作洗脱液,ＲＥＥ总回收率达９６．１％,干扰测定的Ｔｈ,Ｕ,Ｔｉ,Ｚｒ,Ｈｆ等均被除法。方法用于标样分析验证,结果与推荐值相符。     

云南省潜在震源区综合统计判定之一

本文将云南省地震局多年来积累的关于中强震发生的地质构造、地貌、地球物理场、地形变等特征基础资料,用于Cora-3算法的模式识别,得出云南省潜在震源区的背景指标,结果是比较理想的。“投票”结果表明,80%的学习集D类对象仍被识别为D类,85%的学习集N类对象仍被识别为N类,控制试验的结果也表明识别结果是比较稳定和可靠的。     

真空预压法加固吹填土的孔隙水压力试验研究

利用真空预压法处理吹填土时,孔隙水压力变化常常反映土体固结程度的好坏。通过6个模型箱试验,监测不同排水系统下孔隙水压力变化,确定有效排水体间距。研究发现0.4m间距的土内孔压下降效果比0.8m间距的土内孔压下降效果好;排水体内的孔隙水压力与排水体类型有关,且距离排水体10 cm处土体内的孔隙水压力仅为排水体内孔隙水压力的1/2弱;滤膜排水系统中的吹填土孔隙水压力下降幅度最快,B型排水板系统次之,而砂井系统最慢。另外,对于吹填土而言,排水体有效间距介于0.4m与0.8m之间,其中滤膜的有效间距最大,B型排水板次之,砂井远小于前两者。     

多台国内外先进天气现象仪对比分析

业务降水现象仪作为一种降水滴谱测量设备,可以用于天气现象判断,其包含的降水滴谱信息更是反映了诸多降水微物理特征,而不同设备的观测特性和精度存在一定的差异,了解不同设备的差异,对其资料的后续应用有重要的意义。本文利用2018年湖北省咸宁市黑山观测站8次液态降水过程中地面降水观测、DSG5型业务降水现象仪与同址的Parsivel型降水滴谱仪测量的降水粒子谱信息及其反演的物理参量,共1 503对样本开展对比分析,研究结果表明：(1)相比于地面自动站降水数据,Parsivel与地面观测一致性较高,DSG5则有一定的偏小。(2)相对于DSG5,Parsivel观测的粒子数浓度N_w相对较多、质量加权平均直径D_m则相对较小。(3)对于分钟雨强RR≥20 mm·h^-1的降水,Parsivel粒子直径小于(大于)3 mm数浓度高于(低于) DSG5的观测。(4)对于直径大于4 mm的粒子,Parsivel的观测的下落速度略低于理论值,DSG5则明显大于理论值。另外,2次雨雪转换过程中降水现象观测对比研究表明DSG5对降水现象有着良好的观测,相比于Parsivel,其在降水相态转换过程中的天气现象与人工观测结果一致性更好。

     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.