Seasonal variability of intrusion of the Kuroshio water across the continental shelf northeast of Taiwan

The currents over the East China Sea continental slope northeast of Taiwan were monitored from mid-July to early December, 1992 and again from late March to early August, 1993, covering the two transition periods of monsoon seasons. In 1992, we found massive Kuroshio intrusion (onshore velocity reaching 25 cm/s or more) occurred at mid-October, a lag of one month after the wind pattern changed from southerly to northeasterly. By comparing the surface meteorological with observed cross-slope velocity, we suggest that cooling rather than direct wind forcing, i.e., mid-October cold air outbreaks associated with the Siberia highs moving across the East China Sea, may be the major cause for triggering the observed winter intrusion event. The intrusion continued until the end of the 1992 data in early December and again in late March and early April of 1993 when the data became available. In mid-April, 1993, the intrusion suddenly halted when the lows replaced the highs and the wind reversed with warm air from south. In addition, we found that short-period intrusions appeared in August and early September, 1992 and in late July, 1993. All of these summer intrusions coincide with the occurrence of typhoon passages over or further offshore of the area northeast of Taiwan.     

网箱养殖大黄鱼越冬期间脂肪酸的相对含量变化

利用气-质法(GC-MS)对越冬期间海水平均温度在20,16,12,10和8 ℃条件下的2龄大黄鱼肌肉和肝脏组织中脂肪酸组成及相对含量进行分析,结果表明:随着海水水温的降低,机体会增加不饱和脂肪酸含量,尤其是EPA[C20:5(n-3)],EPA在肌肉中的含量从20 ℃时5.71%增至8 ℃时8.06%,在肝脏中从20 ℃时6.76%增至8 ℃时8.44%。由此可见,在越冬禁食条件下,大黄鱼机体通过自身的脂肪酸动态转化和代谢,减少饱和脂肪酸含量,而增加不饱和脂肪酸含量,以此增加膜的流动性,抵御寒冷。     

Aliphatic biomarker signatures of early Oligocene-early Miocene source rocks in the central Qiongdongnan Basin: Source analyses of organic matter

The geochemical signatures of fifty-four rock samples and three supplementary drill stem test(DST) oils from the Yacheng-Sanya formations in the central Qiongdongnan Basin(CQB) were analysed. Reconstruction of the early Oligocene-early Miocene(36–16 Ma) palaeovegetation and source analyses of organic matter(OM) were conducted using aliphatic biomarkers in ancient sediments and DST oils. Both the interpreted aquatic and terrigenous OM contributed to the CQB source rocks(SRs) but had varying relat...     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.     

Study on “J”Type Offshore Pipeline-Laying Method

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.     

海上风电场高桩承台群桩基础平台的设计研究

针对国内海上风电基础设计没有统一的规范及标准,为提升海上风电基础设计建设的水平,通过对东南沿海某海域海上风电基础的设计进行了有限元计算分析论证,验证了群桩高承台结构设计方案的设计方法和设计参数。分析结果表明该设计的最大应力主要发生在塔筒底座与承台接触部位及钢管桩与承台连接段,应在连接部位加强措施处理;基础竖直位移较小,水平位移相对较大;分界部位应力较集中,刚度不能顺畅过渡,可考虑填充碎石土等方法加强。本研究对海上风电基础设计技术的研究与探索,可为将来制定中国海上风电行业标准提供可靠的依据,对中国未来大批量的海上风电能源的开发有着重要意义。     

沉积物粒度组分空间预测的神经网络残余kriging方法

针对近海表层沉积物粒度组分空间变异的尺度差异性,提出了基于广义回归神经网络残余kriging的沉积物粒度组分空间预测方法,并以海州湾沉积物粒度数据为基础,分析了其在沉积物粒度组分空间预测和底质类型制图中的应用效果。结果表明,广义回归神经网络残余kriging方法能够获得比普通kriging方法更高的沉积物粒度组分空间预测精度,并且其底质类型的总体空间预测精度达到85%以上,相应的Kappa系数也在0.8以上,显示底质制图的预测类型与样本的实测类型具有较高的一致性。新方法对于开展定量化的沉积物粒度组分空间预测和底质类型制图具有参考价值。     

Artificial upwelling induced by ocean currents —Theory and experiment

A submerged apparatus, which consists of a buoy, several horizontal contraction and expansion tubes (Venturi-type tubes) and a long pipe, is expected to be used to pump the subsurface sea-water (200–300 meter depth) containing abundant nutrients to surface layer (50–100 m) by the dynamic of ocean currents. i.e. an artificial upwelling without energy cost. A preliminary experiment and analysis are undertaken and shows that the capacity of pumping the nutrient-rich sea-water is worth to build a pilot prototype model.     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.