基于GIS的坡面泥石流危险性评价

综合不同的泥石流评价因子对泥石流危险性进行了研究,利用地理信息系统（ GIS）来计算潜在的泥石流危险区域。选取虹口乡高原村与庙坝村共处坡面为研究区域,在ArcGIS中生成研究区域的坡面立体图。选取适当的评级指标,确定了流域内主要的泥石流影响因子。采用层次分析法得出各主要因子的权重值,将各因子划分为五个不同等级,并分别对各个因子进行数值化和归一化处理。利用ArcGIS形成各评价因子专题层,再分别给不同评价栅格赋权重值,最终运用叠置分析与插值分析得出研究坡面的不同色带所表示的危险等级区划图,从而实现单坡面泥石流危险性的评价。     

DEM studies on the effect of particle breakage on the critical state behaviours of granular soils under undrained shear conditions

Acta Geotechnica - A number of discrete element analyses of undrained triaxial shear tests on crushable assemblies are performed using 3-dimensional particle flow code (PFC3D). The undrained shear...     

平泉地区本溪组和刘家沟组厘定

1:20万平泉幅和1:5万杨树岭幅区域地质图将平泉地区大吉口和南台剖面不整合于马家沟组之上的本溪组地层划为刘家沟组。文章对平泉地区各剖面本溪组进行了岩石地层对比和碎屑锆石LA—ICP—MS U—Pb年龄测定,发现大吉口和南台剖面与山弯子本溪组具有相似的岩相组合、砾石成分和碎屑锆石年龄组成,在此基础上提出位于不整合面之上的是本溪组,而非刘家沟组的新认识。     

地质导向技术在煤层气水平井中的应用——以柳林区块某多分支水平井为例

地质导向技术能有效提高煤层气水平井施工成功率和煤层钻遇率,但由于其具有导向参数多、工艺要求高、易受地质因素影响等特点,使其在实际应用中还存在诸多难点。以柳林区块内某多分支水平井为例,针对该井现场地质导向作业面临的资料缺乏、参数受欠平衡钻进干扰、煤层结构复杂等难点,建立合适的地质导向模型,优选合理的导向参数和导向系统,对地质导向技术在实际应用中的工艺与流程进行了系统论述。实践表明,地质导向技术在该井的应用效果良好:煤层钻遇率达到了93.1%;截至目前,该井的产气量达8600m3/d,且还在进一步提升。     

深部开采圆形巷道围岩破损区与支护压力的确定

应用经典塑性力学理论确定的圆形巷道围岩弹塑性应力场存在一些问题,这影响深部圆形巷道的稳定性评价及支护设计的合理性。应用塑性力学求解新体系确定的圆形巷道围岩弹塑性应力场准确解,进行了各向同性均质地层中圆形巷道破损区、地层残余强度与支护压力关系方面的研究,取得了如下成果:(1)破损区随开采深度的增加而增大,它们基本呈线性关系。(2)建立了支护压力与巷道埋深、围岩强度、围岩破坏后残余强度、围岩泊松比和重度之间的关系。研究成果可为支护设计提供重要参考。     

柴北缘绿梁山地区早古生代弧后盆地型蛇绿岩的年代学、地球化学及大地构造意义

岩石学、地球化学、年代学及Lu-Hf同位素综合研究表明在柴北缘西段绿梁山大平沟地区出露一套弧后盆地型蛇绿岩,岩石类型主要包括变质橄榄岩、变火山岩、变辉长岩及斜长花岗岩。其中变火山岩具有LREE亏损,类似N-MORB的稀土配分模式,同时又具有富集大离子亲石元素,亏损Nb、Ta等高场强元素的岛弧火山岩的地球化学特征,应形成在弧后盆地环境。斜长花岗岩为低钾准铝质花岗岩,具有LREE略微富集,HREE平坦的稀土配分型式,显示强烈Eu正异常,其εHf(t)值介于13.7～15.3之间,为变辉长岩部分熔融的产物,熔融温压条件可能为P=0.8～0.9GPa和T=～800℃。年代学研究结果表明变辉长岩的形成时代为535±2Ma,斜长花岗岩的形成时代为493±3Ma,指示本地区弧后盆地拉张时限至少介于493～535Ma之间,而柴北缘地区古大洋俯冲消减作用应早于535Ma。     

Parallelization of the distinct lattice spring model

The distinct lattice spring model (DLSM) is a newly developed numerical tool for modeling rock dynamics problems, i.e. dynamic failure and wave propagation. In this paper, parallelization of DLSM is presented. With the development of parallel computing technologies in both hardware and software, parallelization of a code is becoming easier than before. There are many available choices now. In this paper, Open Multi‐Processing (OpenMP) with multicore personal computer (PC) and message passing interface (MPI) with cluster are selected as the environments to parallelize DLSM. Performances of these parallel DLSM codes are tested on different computers. It is found that the parallel DLSM code with OpenMP can reach a maximum speed‐up of 4.68× on a quad‐core PC. The parallel DLSM code with MPI can achieve a speed‐up of 40.886× when 256 CPUs are used on a cluster. At the end of this paper, a high‐resolution model with four million particles, which is too big to handle by the serial code, is simulated by using the parallel DLSM code on a cluster. It is concluded that the parallelization of DLSM is successful. Copyright © 2011 John Wiley & Sons, Ltd.     

Geochemical characteristics of gossans related to siderite deposits in carbonate strata,western guizhou

Zonal distribution can be noticed in the gossans resulting from the weathering of siderite in carbonate strata, and this can be accounted for by zoning of subsurface waters. Since siderite is more insoluble than its hostrock, gossans are generally developed in the same place as siderite is exposed. Systematic variations in chemistry are recognizable from the ore body upwards to the surface. The gossans are high in Fe and Mn, but impoverished in S, P, Pb, Zn, Be, Cd, and Ag. This may serve as an indicator of distinguishing siderite gossans from sulphide ones in this region.     

锚拉杆张拉力和摩阻力的现场实验研究与分析

对锚拉桥台锚拉杆进行了２０小时的现场试验,获得了大量实验数据,对张拉后锚拉杆的张拉力与长度、时间、温度和焊接接头的关系以及土对锚拉杆的摩阻力变化及分布规律作了分析与研究。研究结果对指导该类构筑物的设计与施工有着重要的理论与工程实用价值。