Statistical Properties of the Highest Pulses in Gamma-Ray Bursts

We study the statistical properties of the highest pulses within individual gamma-ray bursts (GRBs). A wavelet package analysis technique and a developed pulse-finding algorithm have been applied to identify the highest pulses from burst profiles observed by BATSE on board CGRO from 1991 April 21 to 1999 January 26. The statistical light curves of the highest pulses in four energy channels have been derived by an aligning method, which illustrate the temporal evolution of the pulse emission. Our result that narrower pulses go with higher energies is consistent with previous findings. By normalizing both the pulse durations and counts to unity, “characteristic” profiles of the highest pulses in the four channels are also derived. The four characteristic profiles are turned out to be almost the same, thus strongly support the previous conclusion that the temporal profiles in different energy channels are self-similar and the previous conjecture on GRB pulses, implying that the emission process is similar at different energies. The cosmological time dilation effect is examined by investigating the relationship between the pulse flux and pulse duration. An anti-correlation between the two was found, which agrees with the expectation of the cosmological time dilation effect. Also, the evolution of the pulse duration with the observational epoch is studied. The result shows that the pulse duration tends to be shorter in later epochs. This trend cannot be explained by the present theoretical models, and may represent a great challenge to current theories.     

工业CT技术在卫星产品检测中的应用

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。     

东湾背斜构造特征与勘探目标选择

东湾背斜位于准噶尔盆地南缘,采用多种地球物理及地质方法,通过多次论证,证明构造是落实的,且其烃源岩、储集层以及盖层条件都较好,但2003年完钻的东湾1井钻探结果却无任何油气显示。在深入了解准噶尔盆地南缘区域构造背景的基础上,探讨了东湾背斜的构造特征、构造演化过程及油气成藏条件,总结出东湾背斜的油气聚集规律,指出在东湾地区可能存在的两种油气藏模式,最后提出下步有利勘探目标区。     

中国人工增雨研究进展

随着全球气候变暖的加剧,水资源短缺问题表现得越来越突出,如何有效地开发利用空中水资源已成为人们关注的热点问题之一。本文回顾了人工增雨的发展历史,概述了当今国内外人工增雨的发展状况,归纳了各地区云状、积云特征、液态含水量、冰晶浓度等云物理特征,并在此基础上对我国各地区尤其是西北地区的增雨潜力进行了分析,最后归纳总结了人工增雨的常用手段、经验和检验人工增雨效果的方法。     

用BP神经网络预测土抗剪强度指标c、φ

提出了应用BP神经网络来预测土抗剪强度指标c、φ。结合工程实例,详细介绍了该方法的建模过程,结果表明预测结果和实测结果很接近,神经网络在土性参数方面应用前景很广阔。     

Wavefield continuation datuming using a near surface model

When topography and low velocity zone differences vary greatly, conventional vertical static time shifts will cause wavefield distortion and influence wave equation seismic imaging for seismic data acquired on a complex near surface. In this paper, we propose an approach to datum correction that combines a joint tomography inversion with wavefield continuation to solve the static problem for seismic data on rugged acquisition topography. First, the near surface model is obtained by refracted wave tomography inversion. Second, the wavefield of sources and receivers are continued downward and upward to accomplish datum correction starting from a flat surface and locating the datum above topography. Based on the reciprocal theorem, Huygens＇ and Fresnel principles, the location of sources and receivers, and regarding the recorded data on the surface as a secondary emission, the sources and receivers are upward-continued to the datum above topography respectively. Thus, the datum correction using joint tomography inversion and wavefield continuation with the condition of a complex near surface is accomplished.     

人造卫星数据库管理系统中ORACLE FORMS的应用

ＯＲＡＣＬＥ ＦＯＲＭＳ是ＯＲＡＣＬＥ数据库系统应用程序重要的开发工具之一,它具有良好的窗口,模拟块以及触发器等功能,同时它作为ＯＲＡＣＬＥ大家族中的一员,与ＯＲＡＣＬＥ的其他应用工具又是分不开的。本文结合实例详细地介绍了ＯＲＡＣＬＥ ＦＯＲＭＳ在开发人造卫星数据库管理系统中的应用。     

利用FHT法反演海洋重力

从快速 Hartley变换 (FHT)基本概念入手 ,给出了 Hotine核在平面近似、球面近似、Molodenskii近似下的反演模型。另对 FHT处理中所需的坐标转换以及边缘效应等问题加以讨论。同时 ,为了改善长波特性的重力场信息 ,利用 M阶次的参考重力场对上述 Molo-denskii模型进行了改化。     

Using 4C OBS to reveal the distribution and velocity attributes of gas hydrates at the northern continental slope of South China Sea

To investigate the distribution and velocity attributes of gas hydrates in the northern continental slope of South China Sea, Guangzhou Marine Geological Survey conducted four-component (4C) ocean-bottom seismometer (OBS) surveys. A case study is presented to show the results of acquiring and processing OBS data for detecting gas hydrates. Key processing steps such as repositioning, reorientation, PZ summation, and mirror imaging are discussed. Repositioning and reorientation find the correct location and direction of nodes. PZ summation matches P- and Z-components and sums them to separate upgoing and downgoing waves. Upgoing waves are used in conventional imaging, whereas downgoing waves are used in mirror imaging. Mirror imaging uses the energy of the receiver ghost reflection to improve the illumination of shallow structures, where gas hydrates and the associated bottom-simulating reflections (BSRs) are located. We developed a new method of velocity analysis using mirror imaging. The proposed method is based on velocity scanning and iterative prestack time migration. The final imaging results are promising. When combined with the derived velocity field, we can characterize the BSR and shallow structures; hence, we conclude that using 4C OBS can reveal the distribution and velocity attributes of gas hydrates.     

石岛湾四种常见鱼类的热耐受性比较研究

作者分别采用动态法和静态法两种实验方法,以石岛湾4种常见鱼类(许氏平鲉(Sebastes schlegeli)、大泷六线鱼(Hexagrammos otakii)、褐菖鲉(Sebastiscus marmoratus)和矛尾虎鱼(Chaeturichthys stigmatias))为研究对象,对比研究了在4个季节基础水温(5.0~26.0℃)和9个温升速率(0.5~15.0℃/h)下这些鱼类的热耐受性。结果表明,4种鱼类的CTM(最大临界温度)和24 h UILT_(50)(24 h高起始致死温度)均与基础水温呈显著正相关,温升速率对鱼类耐热性的影响因鱼种和季节基础温度而异;相同基础水温下4种实验鱼类的CTM值均高于24 h UILT_(50)。4种鱼类的24 h UILT50依次为:矛尾虎鱼许氏平鲉褐菖鲉大泷六线鱼。