初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

Kinetics of peptide hydrolysis and amino acid decomposition at high temperature

Dipeptide hydrolysis and amino acid decomposition appear to follow a first-order rate law. The hydrolysis rate increases exponentially with increasing temperature in aqueous solution at both 265 atm and water steam pressures over the temperature range of 100 to 220 degrees C. Dipeptide hydrolysis has a lower apparent activation energy at 265 atm (44.1 KJ/mol) than at water steam pressure (98.9 KJ/mol). At lower temperatures (<200-220 degrees C), the rate of peptide bond hydrolysis is faster at 265 atm than at water steam pressure. At higher temperatures (>200-220 degrees C), however, peptide bond hydrolysis is slower at 265 atm than at water steam pressure. In aqueous solution, amino acid decomposition rates also increase exponentially with increasing temperature. Amino acid decomposition rates are much higher at 265 atm than at water steam pressure over the entire temperature range investigated.     

Age — heaping: contrasting patterns from china

Detailed examination of China's 1982 census data confirms that the standard of age reporting among the Han Chinese, and among many of the ethnic minorities, is very good. Furthermore the quality of age reporting is unaffected by large variations in levels of literacy which exist between men and women, between young and old, and between rural and urban areas. Much of the credit for the high quality of China's age reporting stems from the distinctive nature of Chinese traditional calendars. However, in the far west of China, in the Xinjiang Autonomous Region, age heaping and age exaggeration are as bad as they are in many other developing countries. The authors show that the poor quality of age reporting in Xinjiang is confined to three of the region's ethnic communities, the Uygur, Kirgiz and Tajik, who appear to neither know, nor care, how old they are.     

辽南复州湾太原组的燕海扇类

本文记述了发现于辽南复州湾上石炭统太原组的燕海扇类,计5属17种。讨论了Annuliconcha与Paradoxipecten的属征及有关问题。上述发现在东北地区尚属首次。     

基于微电子系统（MEMS）加速度地震勘探三分量数字检波器简介

基于微电子机械系统（MEMS）制成的微加速度三分量数字地震检波器。集数据采集、处理及传输功能干一体，在结构模型、工作原理、性能指标控制等方面不同于常规检波器，其信号幅值在低于自然频率范围内没有衰减。因其独特的制造技术，MEMS检波器具有超低噪声，大动态范围和极高的向量保真度性能。     

GIS中直线元内插点精度及对误差带的影响

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。     

法国国家测绘局（IGN）述评

法国是世界测绘强国之一。法国国家测绘局（IGN）是法国测绘的领导机构。本文介绍了IGN的概况，并对IGN大地测量、地图制图、对外服务、研究机构等情况作了较详细的描述。在此基础上对IGN的未来发展特点提出了几点看法。     

用逐步回归预测棉铃虫发生期和发生量

收集了1973年至2000年的气象，农作物、棉铃虫虫害等196年因子，以运城、汾阳和临汾为山西省代表站，利用最优二分割法把发生量分为10级，5级和不分级3种情况；使用逐步回归计算了219个模型，从中选出27个棉铃虫二、三代发生期，发生量最优模型，在农气服务中应用，预报准确率为95％，效果良好。     

Origin of a large breccia-vein system in the Sanerlin uranium deposit, southern China: a reinterpretation

The early Tertiary Sanerlin uranium deposit is located near the southwestern margin of the Chaling-Yongxing pull-apart basin defined by the Chaling-Yongxing and Chenxian-Linwu sinistral strike-slip faults in southern China. The uranium ores are hosted in 15 breccia-vein bodies, which are separately located in the cores of three secondary anticlines of the Upper Permian Dangchong Formation. Individual breccia-vein bodies are composed of fragments of silicified shale and sandstone from the Dangchong Formation, and quartz veinlets as cements. These fragments, together with quartz veins, form a mosaic texture. Hydrothermal pitchblende is the only commercial uranium mineral, mainly occurring as disseminated grains within quartz veins or coating fragments. Other metallic minerals include molybdenite, pyrite, chalcopyrite, galena, sphalerite, and red microcrystalline hematite. Fluid inclusions in quartz veins have homogenization temperatures ranging from 150 to 280 °C, and calculated salinity values between 5.6 and 13.4 wt% NaCl equivalent. Stable isotope analyses show that the mineralizing fluid was characterized by '¹⁸O values of -2.2 to +2.6‰ and 'D_H2O values of -134 to -110‰. These analytical data demonstrate that hydrothermal fluids were mainly derived from formation waters (brines) of the Chaling-Yongxing basin. Fluid overpressuring was caused by an abnormal geothermal gradient and impermeable shales in the deposit area. The geometry, texture, and structure of the breccia-vein system, along with the fluid pressure estimates, suggest that hydraulic fracturing generated the mineralized breccia-vein system. Pitchblende and associated minerals were deposited when gaseous phases were released abruptly from the ore fluids due to the hydraulic fracturing.     

分形在地貌学中应用的几个问题的分析

就实际地貌分形研究工作中经常遇到的截面约定、自仿射分形局域维与渡越长度、分维的比较以及过渡分形等几个问题进行了分析和探讨，并提出了在应用过程中的注意事项和解决方案。