Characteristics and planation surface formation environment of the red weathering crust in Hunan,Guangxi, Yunnan,Guizhou and Tibet

The characteristics of red karst weathering crust in the research region can be divided into three subtypes. The first one includes the silicon to aluminum ratio, the composition of the clay minerals, etc., and reflects the weak action of de-silicon and aluminum enrichment. The second one, for example the granularity, shows that the viscous action is strong. The third one, such as the CaCO₃ content and pH value, has regional difference in a large scale, which is consistent with the condition of modern scenery, so it is not important as for the ancient environment.

     

Morphological responses ofLimnocythere inopinata (Ostracoda) to hydrochemical environment factors

Living ostracod and hydrochemical samples were collected synchronously from more than 50 lakes and small water body in the eastern edge area of the Tibetan Plateau, Northern Tibetan, Southern Tibet and mid-Tibet. The comparison of the adult body length ofLimnocythere inopinata and hydrochemical parameters of their habitats shows that a quantitative relationship exists between the adult body length and salinity expressed as conductivity. An empirical formula to reconstruct paleosalinity is suggested first and applied to salinity reconstruction of CE-2 core from Cuoe Lake, Tibet. The method is verified by comparing its outcome with results of other environment reconstruction methods.

     

System identification of the Vincent Thomas suspension bridge using earthquake records

The Vincent Thomas Bridge in the Los Angeles metropolitan area, is a critical artery for commercial traffic flow in and out of the Los Angeles Harbor, and is at risk in the seismically active Southern California region, particularly because it straddles the Palos Verdes fault zone. A combination of linear and non‐linear system identification techniques is employed to obtain a complete reduced‐order, multi‐input–multi‐output (MIMO) dynamic model of the Vincent Thomas Bridge based on the dynamic response of the structure to the 1987 Whittier and 1994 Northridge earthquakes. Starting with the available acceleration measurements (which consists of 15 accelerometers on the bridge structure and 10 accelerometers at various locations on its base), an efficient least‐squares‐based time‐domain identification procedure is applied to the data set to develop a reduced‐order, equivalent linear, multi‐degree‐of‐freedom model. Although not the main focus of this study, the linear system identification method is also combined with a non‐parametric identification technique, to generate a reduced‐order non‐linear mathematical model suitable for use in subsequent studies to predict, with good fidelity, the total response of the bridge under arbitrary dynamic environments. Results of this study yield measurements of the equivalent linear modal properties (frequencies, mode shapes and non‐proportional damping) as well as quantitative measures of the extent and nature of non‐linear interaction forces arising from strong ground shaking. It is shown that, for the particular subset of observations used in the identification procedure, the apparent non‐linearities in the system restoring forces are quite significant, and they contribute substantially to the improved fidelity of the model. Also shown is the potential of the identification technique under discussion to detect slight changes in the structure's influence coefficients, which may be indicators of damage and degradation in the structure being monitored. Difficulties associated with accurately estimating damping for lightly damped long‐span structures from their earthquake response are discussed. The technical issues raised in this paper indicate the need for added spatial resolution in sensor instrumentation to obtain identified mathematical models of structural systems with the broadest range of validity. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Sources of ore-forming fluids and metallic materials in the Jinwozi lode gold deposit,eastern Tianshan Mountains of China

This paper presents gas compositions and H-, O-isotope compositions of sulfide- and quartz-hosted fluid inclusions, and S-, Pb-isotope compositions of sulfide separates collected from the principal Stage 2 ores in Veins 3 and 210 of the Jinwozi lode gold deposit, eastern Tianshan Mountains of China. Fluid inclusions trapped in quartz and sphalerite are dominantly primary. H-and O-isotopic compositions of pyrite-hosted fluid inclusions indicate two major contributions to the ore-forming fluid that include the degassed magma and the meteoric-derived but rock ¹⁸O-buffered groundwater. However, H- and O-isotopic compositions of quartz-hosted fluid inclusions essentially suggest the presence of groundwater. Sulfide-hosted fluid inclusions show considerably higher abundances of gaseous species CO₂, N₂, H₂S, etc. than quartz-hosted ones. The linear trends among inclusion gaseous species reflect the mixing tendency between the gas-rich magmatic fluid and the groundwater. The relative enrichment of gaseous species in sulfide-hosted fluid inclusions, coupled with the banded ore structure indicating alternate precipitation of quartz with sulfide minerals, suggests that the magmatic fluid has been inputted to the ore-forming fluid in pulsation. Sulfur and lead isotope compositions of pyrite and galena separates indicate an essential magma derivation for sulfur but the multiple sources for metallic materials from the mantle to the bulk crust.

     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Thermal bidirectional gap probability model for row crop canopies and validation

Land surface temperature is a key parameter in monitoring the status of crop water stress by remote sensing, and studying the water and energy balance in cropland ecosystem. The component temperatures of crop and soil are especially significant in remote …     

实现数据库管理震源参数的探索

就如何利用数据库，结合Java、XML等手段对震源参数管理进行了一些探索，并给出了一些在一个实际系统中实现了的例子。     

格尔木地磁台观测环境测试与分析

通过实验测试和计算，分析了高压输出电线等干扰源对格尔木地磁台观测环境的影响，进一步对格尔木地磁台观测环境现状，及今后观测环境保护工作的要点进行了综合分析讨论。     

冀鲁豫交界区地下流体模糊熵值的变化与地震的关系

采用概率化预处理方法，把冀鲁豫交界区地下流体多种观测项目的观测值转化为概率值时间序列，然后计算其模糊从属函数。在此基础上计算该区地下流体构成的信息源系统的模糊熵值，分析了模糊熵值变化与1983年山东菏泽Ms 5.9地震和1985年河北任县Ms5.0地震的关系。结果显示，在这两次中强地震前分别有明显的减熵异常过程，并且一次比一次明显，中强地震都发生在低熵值处，震后恢复到高熵值的变化过程。这可能反映了地下流体构成的信息源系统在地震孕育和发生过程中的减熵有序变化。通过研究认为，该区模糊熵值减到0.907为发震前兆异常警戒线，并且离中强地震发生的时间越近，减熵过程越大；震级越大，减熵过程越明显，减熵时间越长。