山西能源重化工基地建设研究

山西能源重化工基地建设关系到全国四个现代化的实现,被列为国家重点建设工程,制定了《山西能源重化工基地综合规划》。本文分析了80年代山西省经济建设的成就与问题。提出了“整体创新,综合开发”,把山西能源重化工基地建设成内陆经济开放区的战略大思路,为此,90年代应完成11项大型经济战略工程,同时展望了经济发展改革前景。     

频率域电磁法中视电阻率全区定义

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。     

精品课程教学基本建设与教学改革研究——以《遥感概论》省级精品课程建设为例

以《遥感概论》省级精品课程建设为例,探讨精品课程教学基本建设与教学改革。认为高素质的教师队伍是精品课建设的基础,课程体系和教学内容的设计是精品课建设的关键,课程网站是精品课程建设的必备条件,学生综合能力提高是精品课建设的目标,并结合课程教学实践,提出了相应的建设措施。     

基于AHP和BP神经网络的深部地热水可持续开发能力评价

采用资料完整性、开采潜力、回灌量、平均水压下降速率、地面沉降速率、水温、水质、地热井布局8项指标构建天津地热可持续开发能力评价指标体系;运用层次分析法确定了各项指标的权重,建立起评价因素集和评语集,给出了归一化数值;建立了天津地热可持续开发能力的BP神经网络模型,以层次分析法得出的结果作为样本,对BP网络进行了训练和测试,实例评价结果表明了AHP和BP神经网络方法的可行性,为地热资源的可持续开发能力评价提供了一种新的评价方法。     

印度洋岸边某电站工程的岩土工程问题初探

从海岸地带的地理地质环境入手,针对燃煤电站工程的特点,就工程建设中的几个主要岩土工程问题,分析探讨了其成因、特点和对工程建设的制约与影响程度．提出了解决这些问题的对策和建议。     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

Climate changing characteristics of Zhangye City in Heihe River basin during 1968–2005

At present, researches on climate change of the Heihe River basin mainly focus on the relationship between basin climate change and regional water resources, regional desertification and dynamic climatic seasons of sandstorm, but less on climate change of oasis region, where there are more intense and frequent human activities. Based on data of precipitation, temperature, strong wind and dust events frequencies obtained from the six meteorological stations of Zhangye region in Heihe River basin, the features of climate change during 1968–2005 were carefully studied. Results show that the regional temperature rise rate exceeded the average level of China. The annual precipitation changed a little, but the precipitation had a slowly increasing trend in spring and winter. Frequencies of strong wind and sandstorm days show obviously descending trends, which had a close correlation with the regional temperature rise and the precipitation increase in spring and winter. Meanwhile, further human economic activities and exploitations to the oasis in the inland valley of arid regions also affected the climate change of this region, which has a sensitive and fragile eco-environment. __________ Translated from Journal of Desert Research, 2007, 27(6): 1048–1054 [译自: 中国沙漠]     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

DS600和MAX6612在温度传感器中的试验应用

DS600和MAX6612是MAX(美国美信公司)新出的两款模拟温度传感器产品。这两款芯片在性能上各有其优越性,本文主要就其特征、参数、结构、功能等分别进行了研究,并结合实践情况进行了试验和应用。