Effect of Wetland Reclamation on Soil Organic Carbon Stability in Peat Mire Soil Around Xingkai Lake in Northeast China

Content and density of soil organic carbon(SOC) and labile and stable SOC fractions in peat mire soil in wetland, soybean field and rice paddy field reclaimed from the wetland around Xingkai Lake in Northeast China were studied. Studies were designed to investigate the impact of reclamation of wetland for soybean and rice farming on stability of SOC. After reclamation, SOC content and density in the top 0–30 cm soil layer decreased, and SOC content and density in soybean field were higher than that in paddy field. Content and density of labile SOC fractions also decreased, and density of labile SOC fractions and their ratios with SOC in soybean field were lower than that observed in paddy field. In the 0–30 cm soil layer, densities of labile SOC fractions, namely, dissolved organic carbon(DOC), microbial biomass carbon(MBC), readily oxidized carbon(ROC) and readily mineralized carbon(RMC), in both soybean field and paddy field were all found to be lower than those in wetland by 34.00% and 13.83%, 51.74% and 35.13%, 62.24% and 59.00%, and 64.24% and 17.86%, respectively. After reclamation, SOC density of micro-aggregates( 0.25 mm) as a stable SOC fraction and its ratio with SOC in 0–5, 5–10, 10–20 and 20–30 cm soil layers increased. SOC density of micro-aggregates in the 0–30 cm soil layer in soybean field was 50.83% higher than that in paddy field. Due to reclamation, SOC density and labile SOC fraction density decreased, but after reclamation, most SOC was stored in a more complex and stable form. Soybean farming is more friendly for sustainable SOC residence in the soils than rice farming.     

北极新奥尔松地区有机氯农药和多氯联苯在不同环境样品中的浓度及特性

采用毛细管气相色谱法(GC-ECD)对北极新奥尔松地区地表沉积物、苔藓和动物粪便中的有机氯农药(OCPs)和多氯联苯(PCBs)进行分析研究。所有样品和空白的回收率分别为69.5%-92.2%(78.8%)、75.1%-112.1%(98.5%)和67.7%-95.1%(79.5%),相对标准偏差分别为6.7%、8.0%和11.3%。检测到OCPs中主要的单体是HCHs和DDTs,浓度范围分别为0.86-4.50ng/g(2.24ng/g)和0.22-1.09ng/g(0.55ng/g),其中HCHs主要以α,β异构体为主,二者占HCHs总量的81.6%,DDTs则主要以单体p,p′-DDD为主。样品中PCBs的浓度范围在0.20-3.25ng/g(0.84ng/g)之间,主要由四氯、五氯和六氯代PCBs同类物组成,分别占总量的23.8%、26.7%和32.3%。本文对HCHs和DDTs各组分间的比值进行了对比研究,并对PCBs同系物进行了主成分分析,证实大气传输是新奥尔松地区环境中POPs污染来源的主要途径之一,并且POPs污染来源具有相同的输入途径。     

Effects of Biochar Application on Soil Organic Carbon in Degraded Saline-sodic Wetlands of Songnen Plain,Northeast China

Biochar amendment is considered as an efficient practice for improving carbon storage in soils. However, to what extent that biochar application promotes organic carbon in saline-sodic soils remains poorly understood. By comparing soil organic carbon(SOC)contents change before and after biochar addition, we deciphered the driving factors or processes that control SOC change in response to biochar application. A limited increase in SOC was observed, about by 1.16%-12.80%, even when biochar was ap...     

Multiscale evolution of surface air temperature in the arid region of Northwest China and its linkages to ocean oscillations

Reference crop evapotranspiration (ETo) is one of the most important links in hydrologic circulation and greatly affects regional agricultural production and water resource management. Its variation has drawn more and more attention in the context of global warming. We used the Penman-Monteith method of the Food and Agriculture Organization, based on meteorological factors such as air temperature, sunshine duration, wind speed, and relative humidity to calculate the ETo over 46 meteorological stations located in the Yangtze River Delta, eastern China, from 1957 to 2014. The spatial distributions and temporal trends in ETo were analyzed based on the modified Mann-Kendall trend test and linear regression method, while ArcGIS software was employed to produce the distribution maps. The multiple stepwise regression method was applied in the analysis of the meteorological variable time series to identify the causes of any observed trends in ETo. The results indicated that annual ETo showed an obvious spatial pattern of higher values in the north than in the south. Annual increasing trends were found at 34 meteorological stations (73.91 % of the total), which were mainly located in the southeast. Among them, 12 (26.09 % of the total) stations showed significant trends. We saw a dominance of increasing trends in the monthly ETo except for January, February, and August. The high value zone of monthly ETo appeared in the northwest from February to June, mid-south area from July to August, and southeast coastal area from September to January. The research period was divided into two stages—stage I (1957–1989) and stage II (1990–2014)—to investigate the long-term temporal ETo variation. In stage I, almost 85 % of the total stations experienced decreasing trends, while more than half of the meteorological stations showed significant increasing trends in annual ETo during stage II except in February and September. Relative humidity, wind speed, and sunshine duration were identified as the most dominant meteorological variables influencing annual ETo changes. The results are expected to assist water resource managers and policy makers in making better planning decisions in the research region.     

非洲Melut盆地北部不同地区原油有机地球化学特征及意义

为了明确Melut盆地北部不同地区原油母质来源、沉积环境及亲缘关系,采用饱和烃色谱及色谱-质谱方法,开展了盆地北部不同地区原油地球化学特征分析及对比。研究表明,盆地北部各地区原油正构烷烃无明显奇偶优势,Ts/Tm值1.36～3.47、C₃₁升藿烷22S/(22S+22R)比值0.54～0.60、αααC₂₉20S/(20S+20R)与C₂₉αββ/(ααα+αββ)比值大于0.4,总体表现为成熟原油;伽马蜡烷指数普遍小于0.1,C₂₁三环萜烷具有明显优势,Pr/Ph值0.97～2.31,均值1.61,指示其烃源岩形成于弱还原-弱氧化的淡水湖相环境;生油母质为II～III型混合型。不同地区原油母质来源及成熟度有差异：Moleeta次凹东坡原油为单峰后峰态分布,高碳数正构烷烃含量占优势,C₂₄TeT/C₂₃TT平均值大于1,具有明显的陆源高等植物贡献,原油成熟度较低,发育重质—中质油;Jamous次凹深洼区原油为前峰优势的双峰态分布,C₂₄     

丹巴县甲居滑坡复活机制及其稳定性分析

甲居滑坡为一个特大型堆积层古滑坡,因其位于四川省丹巴县甲居藏寨风景旅游区而广受关注.结合滑坡形成的地质环境条件,从滑坡形态、坡体结构、地表变形破坏发育特征等方面人手,对该典型堆积层滑坡进行了分析论述.研究表明,滑坡形成演化历史较为复杂,是一个多级多层滑动形成的非连续复合变形体,其变形复活与滑坡岩土结构、河流侵蚀和人类工程活动密切相关,滑坡具有长期间歇性蠕滑变形特征,以局部滑移为主,难以产生整体性变形破坏,进而为滑坡下一步的监测治理提供了依据.     

海气交换与呼吸作用调控下杭州湾碳酸盐体系的特征

杭州湾作为典型的高浑浊度海湾,对其水体碳酸盐体系分布特征的研究相对较少。本文基于两个夏季航次(2018年和2019年)获取的调查资料,阐述夏季杭州湾水体中碳酸盐体系参数的空间分布特征,并进一步分析影响溶解无机碳偏离保守混合作用的主要过程及相对贡献。数据结果表明,杭州湾内表层溶解无机碳浓度与总碱度的变化范围分别为1 553～1 964 μmol/kg和1 577～2 101 μmol/kg,略低于长江口(1 407～2 110 μmol/kg和1 752～2 274 μmol/kg),溶解无机碳浓度和总碱度的空间分布受控于淡水与外海水混合的影响,在潮汐作用下,总体呈现出湾内低,向湾外逐渐升高的趋势。影响表层溶解无机碳非保守混合分布的主要过程中,海−气交换降低溶解无机碳浓度,呼吸作用增加溶解无机碳浓度,两个过程对溶解无机碳浓度变化量的贡献分别为(−42.3±11.7)%与(34.2±14.3)%,净效应呈现为相对平衡的状态。通过计算获得表层海水pCO₂的平均值为799 μatm (675～932 μatm),海湾总体表现为大气CO₂的源。此外,湾内海水碳酸盐缓冲因子的范围为12.8～23.8,对CO₂的缓冲能力弱于邻近东海海水(缓冲因子平均值约为11.9),指示其与外部水体的交换可能会降低附近海域的酸化缓冲能力。相对其他河口/海湾而言,杭州湾内高浊度与强潮汐的特点使其湾内水体的碳酸盐体系分布特征具有区域特殊性。     

Relationship between age of waste and natural electric potential generation in Sanitary Landfill

The geophysical methods are effective tools for determining changes in physical parameters of the geological environment, as soil or groundwater in the presence of contamination. This work consisted on analyzing the natural electric potential obtained over domestic solid waste ditches with controlled closure dates. The interpretation data suggest the generation of electric potential predominantly through the redox phenomenon, as opposed to the flow potential phenomenon. The statistical data analysis indicates a correlation between residence time of the waste and growing variations of voltage. In addition highlights that eight years are required to achieve the reported values for the area with absence of waste, time estimated for decomposition of most organic matter contained in the buried waste.     

Modelling the petroleum generation and migration of the third member of the Shahejie Formation (Es3) in the Banqiao Depression of Bohai Bay Basin,Eastern China

The mudstones in the third member of the Shahejie Formation (Es3) are the primary source rocks in the Banqiao Depression of Bohai Bay Basin. They are rich in organic matter with Total Organic Carbon (TOC) content up to 3.5%. The sandstones in the Es3 member are the deepest proven hydrocarbon reservoir rocks with measured porosity and permeability values ranging from 3.6% to 32.4% and from 0.01 md to 3283.7 md, respectively. One, two and three-dimensional basin modelling studies were performed to analyse the petroleum generation and migration history of the Es3 member in the Banqiao Depression based on the reconstruction of the burial, thermal and maturity history in order to evaluate the remaining potential of this petroleum province. The modelling results are calibrated with measured vitrinite reflectance (R_o), borehole temperatures and some drilling results of 63 wells in the study area. Calibration of the model with thermal maturity and borehole temperature data indicates that the present-day heat flow in the Banqiao Depression varies from 59.8 mW/m² to 61.7 mW/m² and the paleo-heat flow increased from 65 Ma to 50.4 Ma, reached a peak heat-flow values of approximately 75 mW/m² at 50.4 Ma and then decreased exponentially from 50.4 Ma to present-day. The source rocks of the Es3 member are presently in a stage of oil and condensate generation with maturity from 0.5% to 1.8% R_o and had maturity from 0.5% to 1.25% R_o at the end of the Dongying Formation (Ed) deposition (26 Ma). Oil generation (0.5% R_o) in the Es3 member began from about 37 Ma to 34 Ma and the peak hydrocarbon generation (1.0% R_o) occurred approximately from 30 Ma to 15 Ma. The modelled hydrocarbon expulsion evolution suggested that the timing of hydrocarbon expulsion from the Es3 member source rocks began from 31 Ma to 10 Ma with the peak hydrocarbon expulsion shortly after 26 Ma. Secondary petroleum migration pathways in the Es3 member of the Banqiao Depression are modelled based on the structure surfaces at 26 Ma and present-day, respectively. The migration history modelling results have accurately predicted the petroleum occurrences within the Es3 member of the Banqiao Depression based on the calibration with drilling results of 10 oil-producing wells, one well with oil shows and 52 dry holes. Six favorable zones of oil accumulations in the Es3 member of the Banqiao Depression are identified especially oil accumulation zones I and II due to their proximity to the generative kitchens, short oil migration distances and the presence of a powerful drive force.