Mechanism of Secondary Pore Formation and Prediction of Favorable Reservoir of Paleogene in Jiyang Sag,Eastern China

Jiyang (济阳) sag is an oil rich basin,consisting of Huimin (惠民),Dongying (东营),Zhanhua (沾化),and Chezhen (车镇) depressions.The elastic rock of Paleogene has undergone early and middle diagenetic stages and now the main clastic reservoir is in the middle diagenetic stage.Primary and secondary pores are developed in Paleogene sandstone,the latter is generated from the dissolution of feldspar and calcite cement in rocks owing to the organic acid from the maturated source rock,but the materials dissolved are different in different depressions.The reservoir secondary pores of Dongying depression are generated from the dissolution of calcite cement,the ones of Zhanhua and Huimin depressions from the dissolution of feldspar,the secondary pores of Chezhen depression from the dissolution of feldspar in upper section,and the dissolution of calcite cement in the lower section of Paleogene,respectively.The secondary pores are developed in two depths and the depth goes down from west to east,from south to north in Jiyang sag.The major controlling factors for secondary pore development are maturity and location of source rock.Lastly,the favorable reservoirs are evaluated according to reservoir buried depth,sedimentation,and diagenesis.The reservoir with high quality is located in the northern and central parts in Dongying depression; there are some good reservoirs in Gndao (孤岛),Gudong (孤东),and Gunan (孤南) areas in Zhanhua depression,and the favorable reservoirs are located in the north steep slope and the south gentle slope of Chezhen depression and central uplift,south gentle slope of Huimin depression.     

GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

Chronology and cooling history of the Tianmenshan pluton in South Jiangxi Province and their geological significance

Geochronological studies on the crust-derived Tianmenshan pluton were undertaken by SHRIMP zircon U-Pb dating and Ar-Ar dating of biotite, muscovite and K-feldspar, giving a petrogenetic age of 167 Ma. Owing to the closure systems in different minerals, the cooling history of the pluton can be determined with an age-temperature diagram. The late hydrothermal event has been recognized, which is related probably with mineralization. In terms of the comparative geochronological and petrologic records, it is concluded that there are some constrains on tectonic evolution and that the formation of the Tianmenshan pluton proceeded in a transition period from Indosinian post-orogeny extension to strong compressive tectonics. And the timing of the hydrothermal event matches the compressive climax of the Yanshanian orogeny. The temporal gap between granite emplacement and wolframite mineralization could last 10-20 Ma owing to the low cooling rate of the pluton.     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

Use of laser range and height texture cues for building identification

Airborne LiDAR has found application in an increasing number of mapping and Geo-data acquisition tasks. Apart from terrain information generation, applications such as automatic detection and modeling of objects like buildings or vegetation for the generation of 3-D city models have been explored. Besides the height itself, height texture defined by local variations of the height is a significant parameter for object recognition. The paper explores the potential of the analysis of height texture as a cue for the automatic detection of objects in LiDAR datasets. A number of texture measures were computed. Based on their definition and computation these measures were used as bands in a classification algorithm, and objects like buildings, single trees, and roads could be recognized.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

The distribution and geological significance of carbazole compounds in Silurian paleo-pools of the Tarim Basin,Northwest China

The results presented in this paper indicated that the carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has high concentrations and a complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in the study of hydrocarbon migration of the paleo-pools. The difference in the contents of nitrogen compounds in the Silurian dry asphalts from the Awati, Tabei and Tazhong areas is attributed to the difference in the extent of oxidation and （or） bio-degradation for the areas; the Awati and Tabei areas underwent relatively strong oxidation and bio-degradation. During the first stage of hydrocarbon pool formation in the Silurian system in the Tazhong and Tabei areas of the Tarim Basin （at the end of the Silurian period） and at the second stage in the Awati area （in Permian）, the hydrocarbons experienced a long-distance migration.