Catastrophic landslip activity in two hard rock terrains of peninsular India

This paper presents the case histories of two catastrophic landslips in hard rock terrains with varied climatic and geological environments. The first slip is associated with a power project in very close proximity (200 m) of the Porthimund Dam (11°22N, 76°3430E), in a charnockitic terrain in the Nilgiri hills (Tamil Nadu), and the second is associated with a railroad structure (19°525N, 78°1720E), in Adilabad district (Andhra Pradesh), in a basaltic terrain.The landslip in the charnockites is attributable to: (1) a high degree of saprolitization in the charnockites, with maximum intensity in the crest portion; (2) the coincidence of a major joint pattern in a NE-SW direction, with the strike of the foliation; and (3) the poor-to-fair physical rock quality in the crest and scarp portions.The slips in the basaltic terrain are due to: (1) the partially altered, highly jointed nature of the regional trap rocks with boulder sizes varying from 20 cm to 250 cm in diameter and the debris accumulating in a precarious condition on the northeast side of the rail track, with unfavorable alignment direction; and (2) the instability created in the weak rock mass by the vibrational forces of heavily loaded running trains.The weathered state of the rock masses in both the cases, showing good agreement with their physical state, accounts for the landslips. The remedial measures suggested are also discussed.     

Carbon-oxygen isotopic covariation in hydrothermal calcite during degassing of CO2

The effect of the outgassing of CO₂ from a hydrothermal fluid on the C- and O-isotopic compositions of calcite, which is precipitated from this fluid, is quantitatively modelled in terms of batch and Rayleigh distillation equations. Both CO₂ degassing and calcite precipitation are considered to be the removal mechanisms for dissolved carbon species from the fluid. Combined degassing-precipitation models are then developed by taking H₂CO₃ and HCO ₃ ^– , respectively, as the dominant dissolved carbon species. A positive correlation array between ¹³C and ¹³O values of calcite can be yielded by the precipitation of calcite from a H₂CO ₃ ^– -dominant fluid, accompanied by a progressive decrease in temperature during CO₂ degassing, whereas calcite precipitated from a HCO ₃ ^– -dominant fluid under the same conditions tends to display much smaller variation in ¹³C values than in ¹⁸O values. The combined processes of CO₂ degassing and calcite precipitation result in lowering the ¹³C value of calcites with respect to those precipitated in a closed system simply due to temperature effect. Carbon and oxygen isotopic data for calcite from the Kushikino gold-mining area in Japan illustrate the application of quantitative modelling, and degassing of CO₂ is suggested as a more likely cause for the precipitation of the calcite and quartz in this mining area.     

M computed from strong motion accelerograms recorded in Yugoslavia

It is shown that the new definition¹ of strong motion local magnitude M leads to stable estimates of magnitudes for earthquakes in Yugoslavia, with epicentral distances R <100 km and for 2.5 < M < 6.5. Tables with magnitudes computed using this new procedure are presented for all earthquakes contributing to the strong motion accelerogram files in EQINFOS for Yugoslavia.² The similarity of our findings with the analogous analyses for California suggests new possibilities for relative calibration between various local magnitude scales, which are used in southeastern Europe, and M_L in California.     

Structure of the marine boundary layer over north western Indian Ocean during 1983 summer monsoon

The spatial variability of the structure of the lower troposphere over the northwestern Indian Ocean for the period 12th July to 2nd September, 1983 has been studied using upper air data collected during the first scientific cruise of ORV Sagar Kanya.An analysis of thermodynamic structure and kinematics of the marine boundary layer for different zonal and meridional sections revealed the following features: (a) Temperature and humidity inversions were generally absent over the study area except over a few locations in the western region; (b) Large-scale subsidence was found over the central equatorial Indian Ocean; (c) The convective activity over the western Indian Ocean was found to be moderately suppressed as compared to the eastern region; (d) The zonal and meridional components of winds along the equator and 10° N zonal section exhibited a mirror-image-like distribution.     

Footprint prediction of scalar fluxes from analytical solutions of the diffusion equation

The use of analytical solutions of the diffusion equation for footprint prediction is explored. Quantitative information about the footprint, i.e., the upwind area most likely to affect a downwind flux measurement at a given height z, is essential when flux measurements from different platforms, particularly airborne ones, are compared. Analytical predictions are evaluated against numerical Lagrangian trajectory simulations which are detailed in a companion paper (Leclerc and Thurtell, 1990). For neutral stability, the structurally simple solutions proposed by Gash (1986) are shown to be capable of satisfactory approximation to numerical simulations over a wide range of heights, zero displacements and roughness lengths. Until more sophisticated practical solutions become available, it is suggested that apparent limitations in the validity of some assumptions underlying the Gash solutions for the case of very large surface roughness (forests) and tentative application of the solutions to cases of small thermal instability be dealt with by semi-empirical adjustment of the ratio of horizontal wind to friction velocity. An upper limit of validity of these solutions for z has yet to be established.     

A generalized approach to the evaluation of reflection effects in close binary systems

A convenient integral formulation (-integrals) proves useful in describing reflection effects where there is an axisymmetric illumination, and the form of the emergent intensity distribution of the reflected component can be approximated by a cosine series. The formulation is applied to close binary systems where theoretical curves for the reflected light variation are considered. The treatment proceeds to the fifth power in the fractional dimensions — i.e. including combination of the leading terms of reflection with physical distortion of the components — and is therefore consistent with the usual first order theory of photometric proximity effects in close binary systems.     

Laser action in stellar envelopes

It is shown that in high-temperature stars in which high speed mass loss is occurring, the rapidly recombining plasma in the stellar envelope can act as an amplifying medium. Model calculations for laser action in Heii 4686, using the collisional-radiative model, are presented. Menzel's hypothesis of laser action in distended stellar atmospheres is shown to be fully substantiated. The relevance of these results in resolving the problem of intensity anomalies in the spectra of Wolf-Rayet stars is pointed out.     

The appearance of Mars from 1907 to 1971: Graphic synthesis of photographs from the I.A.U. center at Meudon

Using selected high quality plates collected at the I.A.U. Planetary Data Center in Meudon (Paris), the author has drawn 32 Mercator charts of the planet Mars for every opposition from 1907 to 1971. This graphic synthesis of albedo distribution may be used in the study of major surface changes over the years.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

Insight into the structure of the Upper Rhine Graben and its basement from a new compilation of Bouguer Gravity

A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.