Groundwater flow model, recharge estimation and sustainability in an arid region of Patagonia, Argentina

The Península Valdés, in northeastern Patagonia, Argentina, is characterised by its arid climate and the lack of perennial watercourses; thus, all economic activities depend on the groundwater resources. Water demand is mainly associated with tourism, which is centralised in Puerto Pirámides and supplied by a water desalination plant, and to sheep farming, supplied by the local aquifer. Due to the exponential growth of tourism, the government is planning to exploit groundwater and convey it by aqueduct to the abovementioned locality. The objectives of this study were to corroborate the conceptual geohydrological model, to develop a mathematical model to simulate the response of the aquifer to different scenarios, and to assess the incidence of water input into the system as a variable—a function that poses difficulties in the models for arid regions. The Visual Modflow 4.1 code was used, calibrating it in trial-and-error mode, changing the recharge and hydraulic conductivity parameters with different variants in the recharge zone and in the inclusion or exclusion of the evapotranspiration module. Results indicate the importance of the recharge analysis by treating rainfall at daily time steps. The adjusted model was exposed to four scenarios with variations in water input and in output by pumping. It can be concluded that under different input conditions, but with a controlled extraction, the system responds in a sustainable manner.     

The ionosphere: effects,GPS modeling and the benefits for space geodetic techniques

The main goal of this paper is to provide a summary of our current knowledge of the ionosphere as it relates to space geodetic techniques, especially the most informative technology, global navigation satellite systems (GNSS), specifically the fully deployed and operational global positioning system (GPS). As such, the main relevant modeling points are discussed, and the corresponding results of ionospheric monitoring are related, which were mostly computed using GPS data and based on the direct experience of the authors. We address various phenomena such as horizontal and vertical ionospheric morphology in quiet conditions, traveling ionospheric disturbances, solar flares, ionospheric storms and scintillation. Finally, we also tackle the question of how improved knowledge of ionospheric conditions, especially in terms of an accurate understanding of the distribution of free electrons, can improve space geodetic techniques at different levels, such as higher-order ionospheric effects, precise GNSS navigation, single-antenna GNSS orientation and real-time GNSS meteorology.     

Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.     

Greenhouse gas taxes on animal food products: rationale, tax scheme and climate mitigation effects

Agriculture is responsible for 25?C30% of global anthropogenic greenhouse gas (GHG) emissions but has thus far been largely exempted from climate policies. Because of high monitoring costs and comparatively low technical potential for emission reductions in the agricultural sector, output taxes on emission-intensive agricultural goods may be an efficient policy instrument to deal with agricultural GHG emissions. In this study we assess the emission mitigation potential of GHG weighted consumption taxes on animal food products in the EU. We also estimate the decrease in agricultural land area through the related changes in food production and the additional mitigation potential in devoting this land to bioenergy production. Estimates are based on a model of food consumption and the related land use and GHG emissions in the EU. Results indicate that agricultural emissions in the EU27 can be reduced by approximately 32 million tons of CO₂-eq with a GHG weighted tax on animal food products corresponding to ?60 per ton CO₂-eq. The effect of the tax is estimated to be six times higher if lignocellulosic crops are grown on the land made available and used to substitute for coal in power generation. Most of the effect of a GHG weighted tax on animal food can be captured by taxing the consumption of ruminant meat alone.     

Evaluation of heavy metals and arsenic speciation discharged by the industrial activity on the Tinto-Odiel estuary, SW Spain

This study reports the annual amount of heavy metals discharged by industrial activity into the estuary of the Ría of Huelva (SW Spain). The findings showed that the discharged metals found in highest amounts were Fe (11 t y⁻¹), Zn (3.4 t y⁻¹) and Mo (0.88 t y⁻¹). There were other metals with high pollutant charge, such as Ti (232 kg y⁻¹), As (228 kg y⁻¹), Ni (195 kg y⁻¹), Pb (100 kg y⁻¹), Cr (39 kg y⁻¹) and Cd (33 kg y⁻¹). These results were compared with pollutants transported via the Tinto and Odiel rivers from abandoned mining activities in the Iberian Pyrite Belt (IPB), and it was deduced that the amounts spilled exclusively by industries were less than 1% in relation to the total discharge. Hence, the treatment of residues from the IPB should be the priority goal to improve water quality in the estuary.     

Probabilistic risk assessment of common booster biocides in surface waters of the harbours of Gran Canaria (Spain)

The presence of booster biocides in the aquatic environment has been associated with a risk to non-target species due to their proven toxicity. The aim of the present study was to determine the spatial and temporal distribution of common booster biocides in different harbours of the island of Gran Canaria (Spain) and evaluate, by means of a probabilistic risk assessment (PRA), the ecological risk posed by these compounds. With these objectives, a monitoring campaign was conducted between January 2008 and May 2009, collecting a total of 182 seawater samples. Four common booster biocides (TCMTB, diuron, Irgarol 1051 and dichlofluanid) were monitored. Diuron levels ranged between 2.3 and 203 ng/L and Irgarol 1051 between 2.4 and 146.5 ng/L. The ecological risk associated with these levels was always low, however, with probabilities of exceeding the 10th percentile of autotroph toxicity below 3.5%.     

Ecological quality assessment of small estuaries from the Portuguese coast based on fish assemblages indices

The importance of establishing the ecological quality of estuarine systems has been widely acknowledged and led to the development of several fish community-based multimetric indices. Nevertheless, a question rose about the accuracy of these tools when natural disturbance is acting upon the organization of the systems’ communities. Four multimetric indices were used to examine their ability to differentiate the ecological status of five small estuarine systems (southern Portugal), and also to test if they reflected the level of anthropogenic pressures. Fish assemblages from Mira, Odeceixe and Aljezur (in the Southwest coast), Gilão and Bensafrim (in the South coast) estuaries were sampled seasonally for one year, and anthropogenic sources of pressure were identified and quantified. We found that although the applied indices provided information on ecological condition differentiation among systems, they are unable to explain different classes of ecological status in systems with equivalent pressure levels.     

Fault Roughness at Seismogenic Depths from LIDAR and Photogrammetric Analysis

Fault surface roughness is a principal factor influencing earthquake mechanics, and particularly rupture initiation, propagation, and arrest. However, little data currently exist on fault surfaces at seismogenic depths. Here, we investigate the roughness of slip surfaces from the seismogenic strike-slip Gole Larghe Fault Zone, exhumed from ca. 10 km depth. The fault zone exploited pre-existing joints and is hosted in granitoid rocks of the Adamello batholith (Italian Alps). Individual seismogenic slip surfaces generally show a first phase of cataclasite production, and a second phase with beautifully preserved pseudotachylytes of variable thickness. We determined the geometry of fault traces over almost five orders of magnitude using terrestrial laser-scanning (LIDAR, ca. 500 to <1 m scale), and 3D mosaics of high-resolution rectified digital photographs (10 m to ca. 1 mm scale). LIDAR scans and photomosaics were georeferenced in 3D using a Differential Global Positioning System, allowing detailed multiscale reconstruction of fault traces in Gocad^®. The combination of LIDAR and high-resolution photos has the advantage, compared with classical LIDAR-only surveys, that the spatial resolution of rectified photographs can be very high (up to 0.2 mm/pixel in this study), allowing for detailed outcrop characterization. Fourier power spectrum analysis of the fault traces revealed a self-affine behaviour over 3–5 orders of magnitude, with Hurst exponents ranging between 0.6 and 0.8. Parameters from Fourier analysis have been used to reconstruct synthetic 3D fault surfaces with an equivalent roughness by means of 2D Fourier synthesis. Roughness of pre-existing joints is in a typical range for this kind of structure. Roughness of faults at small scale (1 m to 1 mm) shows a clear genetic relationship with the roughness of precursor joints, and some anisotropy in the self-affine Hurst exponent. Roughness of faults at scales larger than net slip (>1–10 m) is not anisotropic and less evolved than at smaller scales. These observations are consistent with an evolution of roughness, due to fault surface processes, that takes place only at scales smaller or comparable to the observed net slip. Differences in roughness evolution between shallow and deeper faults, the latter showing evidences of seismic activity, are interpreted as the result of different weakening versus induration processes, which also result in localization versus delocalization of deformation in the fault zone. From a methodological point of view, the technique used here is advantageous over direct measurements of exposed fault surfaces in that it preserves, in cross-section, all of the structures which contribute to fault roughness, and removes any subjectivity introduced by the need to distinguish roughness of original slip surfaces from roughness induced by secondary weathering processes. Moreover, offsets can be measured by means of suitable markers and fault rocks are preserved, hence their thickness, composition and structural features can be characterised, providing an integrated dataset which sheds new light on mechanisms of roughness evolution with slip and concomitant fault rock production.     

Coastal habitat degradation and green sea turtle diets in Southeastern Brazil

To show the influence of coastal habitat degradation on the availability of food for green turtles (Chelonia mydas), we assessed the dietary preferences and macroalgae community at a feeding area in a highly urbanized region. The area showed low species richness and was classified as degraded. We examined stomach contents of 15 dead stranded turtles (CCL = 44.0 cm (SD 6.7 cm)). The diet was composed primarily of green algae Ulva spp. (83.6%). In contrast, the macroalgae community was dominated by the green alga Caulerpa mexicana. We found a selection for red algae, seagrass and Ulva spp., and avoidance for C. mexicana and brown alga Dictyopteris delicatula. The low diversity of available food items, possibly a result of environmental degradation, likely contributed to the low dietary diversity. The nutritional implications of this restricted diet are unclear.     

Uranium pollution in an estuary affected by pyrite acid mine drainage and releases of naturally occurring radioactive materials

After the termination of phosphogypsum discharges to the Huelva estuary (SW Spain), a unique opportunity was presented to study the response of a contaminated environmental compartment after the cessation of its main source of pollution. The evolution over time of uranium concentrations in the estuary is presented to supply new insights into the decontamination of a scenario affected by Naturally Occurring Radioactive Material (NORM) discharges. The cleaning of uranium isotopes from the area has not taken place as rapidly as expected due to leaching from phosphogypsum stacks.An in-depth study using various techniques of analysis, including ²³⁴U/²³⁸U and ²³⁰Th/²³²Th ratios and the decreasing rates of the uranium concentration, enabled a second source of uranium contamination to be discovered. Increased uranium levels due to acid mine drainage from pyrite mines located in the Iberian Pyrite Belt (SW Spain) prevent complete uranium decontamination and, therefore, result in levels nearly twice those of natural background levels.