Modelling and Remote Sensing of Land Surface Temperature in Turkey

This study introduces artificial neural networks (ANNs) for the estimation of land surface temperature (LST) using meteorological and geographical data in Turkey (26?C45°E and 36?C42°N). A generalized regression neural network (GRNN) was used in the network. In order to train the neural network, meteorological and geographical data for the period from January 2002 to December 2002 for 10 stations (Adana, Afyon, Ankara, Eski?ehir, ?stanbul, ?zmir, Konya, Malatya, Rize, Sivas) spread over Turkey were used as training (six stations) and testing (four stations) data. Latitude, longitude, elevation and mean air temperature are used in the input layer of the network. Land surface temperature is the output. However, land surface temperature has been estimated as monthly mean by using NOAA-AVHRR satellite data in the thermal range over 10 stations in Turkey. The RMSE between the estimated and ground values for monthly mean with ANN temperature(LST_ANN) and Becker and Li temperature(LST_B-L) method values have been found as 0.077?K and 0.091?K (training stations), 0.045?K and 0.003?K (testing stations), respectively.     

Multifrequency algorithms for precise point positioning: MAP3

We present the new MAP3 algorithms to perform static precise point positioning (PPP) from multifrequency and multisystem GNSS observations. MAP3 represents a two-step strategy in which the least squares theory is applied twice to estimate smoothed pseudo-distances, initial phase ambiguities, and slant ionospheric delay first, and the absolute receiver position and its clock offset in a second adjustment. Unlike the classic PPP technique, in our new approach, the ionospheric-free linear combination is not used. The combination of signals from different satellite systems is accomplished by taking into account the receiver inter-system bias. MAP3 has been implemented in MATLAB and integrated within a complete PPP software developed on site and named PCube. We test the MAP3 performance numerically and contrast it with other external PPP programs. In general, MAP3 positioning accuracy with low-noise GPS dual-frequency observations is about 2.5 cm in 2-h observation periods, 1 cm in 10 h, and 7 mm after 1 day. This means an improvement in the accuracy in short observation periods of at least 7 mm with respect to the other PPP programs. The MAP3 convergence time is also analyzed and some results obtained from real triple-frequency GPS and GIOVE observations are presented.     

Monitoring of salt affected soils — A case study using aerial photographs,salyut‐7 space photographs,and landsat TM data

Soils of part of Ukai‐kakarapar Command area, Gujarat (India) have been mapped at 1:25, 000 scale using aerial photographs of December 1977. It was observed that about 36.3% of the area was affected by soil salinity/alkalinity. The test area has been remapped using Salyut‐7 space photographs taken during Indo‐Soviet joint flight in April, 1984. The area affected by soil salinity/alkalinity was found to be substantially higher (80.3%). The earlier mapping using aerial photographs was done when the soil surface was compartively moist (December 1977) as compared to date of Salyut‐7 photography (April 1984), when the soil surface was likely to be devoid of moisture and the salts moved to the surface. To have easy comparision with the map prepared by using aerial photographs, Landsat TM data of December, 1985 was used in which 45.7% of the total area was mapped as salt affected. The extent of area delineated using Landsat TM was higher than that of 1977 but much lesser than the area delineated using Salyut‐7 (MKF‐6M) photographs. This indicated that the increase in the extent of salt affected area in the map prepared using the MKF‐6M photographs might be partly due to actual increase in the salinity/alkalinity and partly due to the seasonal affects. Among the various bands of MKF‐6M, band ‐4 was found to be the best for delineating the salt affected soils. The boundaries were sharper in the FCC and band No.4 of MKF‐6M than in the aerial photographs.     

Surface description for urban climate studies: A gis based methodology

In order to understand the nature of the urban climate, predict the effects of urbanization, or attempt to ameliorate some of the negative hydroclimatic effects of urbanization, it is necessary to have a good understanding of the role and significance of the urban surface. This paper presents a methodology which uses GIS to represent the characteristics and morphology of the urban surface, which can be used to describe a site objectively, model fluxes, or ensure spatial consistency between measured and modelled data, all of which can vary through time. The methodology is illustrated with respect to Chicago, Illinois. Surface data collected at three spatial scales were used to construct a georeferenced database which was linked to an objective, dynamic accessing system. Spatial variability of surface cover, derived hydroclimatic attributes, and modelled fluxes associated with changes in the urban environment are used to illustrate potential applications of the approach.     

COMPUTATION AND MAPPING OF THE ELEMENTS OF THE WATER-ICE BUDGET OF GLACIERS

Two general approaches for compiling maps of components of the water-ice budget in regions of glacier nourishment are compared and the resulting maps are analyzed. The compilation of raw data is based on field measurements rather than remote sensing information. Translated by Edward Torrey, Alexandria, VA 22308 from: Materialy glyatsiologicheskikh issledovaniy, 1991, No. 72, pp. 94-102.     

ECOLOGICAL ASSESSMENT AND MAPPING FOR BALANCED REGIONAL DEVELOPMENT

A Russian geographer summarizes the results of a comprehensive study of modern landscapes and the mapping of diverse ecological situations. The procedure involves the development of a system of criteria and indices for the assessment of the properties of the environment, which provide a sound basis for comprehensive ecological mapping. The importance of an ecological assessment in the mapping of environmental problems and situations in support of the stable and balanced development of regions is demonstrated. Translated by Edward Torrey, Alexandria, VA from: Izvestiya Akademiya Nauk, seriya geograficheskaya, 1999, No. 1, pp. 81-87.     

Field Measurements of Plant Emissivity Spectra: An Experimental Study on Remote Sensing of Vegetation in the Thermal Infrared Region

Spectral features of plant species in the visible to SWIR (0.4–2.5 μm) region have been studied extensively, but scanty attention has been given to plant thermal infrared (TIR: 4–14 μm) properties. This paper presents preliminary results of a study that was conducted first time in India to measure radiance and emissivity properties of eight plant species in TIR spectral region in the field conditions using a FTIR (Fourier Transform Infrared) field spectroradiometer working in 4–14 μm at an agriculture experimental farm. Several spectral features in the emissivity spectra of plant species were observed that are probably related to the leaf chemical constituents, such as cellulose and xylan (hemicellulose) and structural aspects of leaf surface like abundance of trichomes and texture. Observations and results from the field measurements were supported by the laboratory measurements like biochemical analysis. These preliminary field emissivity measurements of leaves in TIR show that there is useful spectral information that may be detectable by field-based instrument. More detailed field and laboratory measurements are underway to explore this research theme.     

Testing satellite and ground thermal imaging of low-temperature fumarolic fields: The dormant Nisyros Volcano (Greece)

The Nisyros Volcano (Greece) was monitored by satellite and ground thermal imaging during the period 2000–2002. Three night-scheduled Landsat-7 ETM⁺ thermal (band 6) images of Nisyros Island were processed to obtain land surface temperature. Ground temperature data were also collected during one of the satellite overpasses. Processed results involving orthorectification and 3-D atmospheric correction clearly show the existence of a thermal anomaly inside the Nisyros Caldera. This anomaly is associated mainly with the largest hydrothermal craters and has land surface temperatures 5–10 °C warmer than its surroundings. The ground temperature generally increased by about 4 °C inside the main crater over the period 2000–2002. Ground thermal images of the hydrothermal Stephanos Crater were also collected in 2002 using a portable thermal infrared camera. These images were calibrated to ground temperature data and orthorectified. A difference of about 0–2 °C was observed between the ground thermal images and the ground temperature data. The overall study demonstrates that satellite remote sensing of low-temperature fumarolic fields within calderas can provide a reliable long-term monitoring tool of dormant volcanoes that have the potential to reactivate. Similarly, a portable thermo-imager can easily be deployed for real-time monitoring using telemetric data transfer. The operational costs for both systems are relatively low for an early warning system.     

Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.