The internal gravity modes of the Sun are notoriously difficult to detect, and the claimed detection of gravity modes presented by Fossat et al. (Astron. Astrophys.604, A40, 2017) is thus very exciting. Given the importance of these modes for understanding solar structure and dynamics, the results must be robust. While Fossat et al. described their method and parameter choices in detail, the sensitivity of their results to several parameters was not presented. Therefore, we test the sensitivity of the results to a selection of the parameters. The most concerning result is that the detection vanishes when we adjust the start time of the 16.5-year velocity time-series by a few hours. We conclude that this reported detection of gravity modes is extremely fragile and should be treated with utmost caution. 相似文献
During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u ? v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction. 相似文献
Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms.In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72 h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1–>100 μM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide-oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses. 相似文献
In this paper, we identify a crucial numerical problem in sigma coordinate models, leading to unacceptable spurious diapycnal mixing. This error is a by-product of recent advances in numerical methods, namely the implementation of high-order diffusive advection schemes. In the case of ROMS, spurious mixing is produced by its third-order upwind advection scheme, but our analysis suggests that all diffusive advection schemes would behave similarly in all sigma models. We show that the common idea that spurious mixing decreases with resolution is generally false. In a coarse-resolution regime, spurious mixing increases as resolution is refined, and may reach its peak value when eddy-driven lateral mixing becomes explicitly resolved. At finer resolution, diffusivities are expected to decrease but with values that only become acceptable at resolutions finer than the kilometer. The solution to this problem requires a specifically designed advection scheme. We propose and validate the RSUP3 scheme, where diffusion is split from advection and is represented by a rotated biharmonic diffusion scheme with flow-dependent hyperdiffusivity satisfying the Peclet constraint. The rotated diffusion operator is designed for numerical stability, which includes improvements of linear stability limits and a clipping method adapted to the sigma-coordinate. Realistic model experiments in a southwest Pacific configuration show that RSUP3 is able to preserve low dispersion and diffusion capabilities of the original third-order upwind scheme, while preserving water mass characteristics. There are residual errors from the rotated diffusion operator, but they remain acceptable. The use of a constant diffusivity rather than the Peclet hyperdiffusivity tends to increase these residual errors which become unacceptable with Laplacian diffusion. Finally, we have left some options open concerning the use of time filters as an alternative to spatial diffusion. A temporal discretization approach to the present problem (including implicit discretization) will be reported in a following paper. 相似文献
Based upon a re-interpretation of previous data and a new field campaign, a structural evolution is proposed for the early history of Piton de la Fournaise volcano from 500,000 to 50,000 years. Conceptually, it is shown that the formation of a caldera in which lava flows are contained inside the caldera depression, gives time for erosion to excavate deep canyons on the external slopes of the volcano, for example, the Rivière des Remparts, the Rivière Langevin and the Rivière de l'Est canyons on Piton de la Fournaise volcano. These canyons are infilled when lavas, filling the caldera and overflowing its rim, are able again to flow on the external slopes of the volcano. In the past, this excavating/infilling process has occurred twice following the formation of the Rivière des Remparts and Morne Langevin calderas. The formation of the third caldera, the Plaine des Sables caldera, was followed by the excavation of the current canyons. In addition to this process, two large landslides have been documented in the field. The first, which happened about 300,000 years ago, is apparently the first episode of the break up of Piton de la Fournaise volcano, predating the formation of the four large calderas. The second landslide, which occurred 150,000 years ago and is considered to be less extensive, has carried away the entire southern flank of the Rivière des Remparts caldera. 相似文献
Trace element and isotopic characteristics of late Carboniferous to early Permian minettes and kersantites have been determined. These lamprophyres have been sampled throughout the Western European Hercynian orogen, from Brittany to the west to Schwarzwald to the east. In spite of sharp petrological differences reflected by mineralogy and major element geochemistry, minettes and kersantites exhibit close identity with respect to trace element and isotopic features. These features comprise enrichment in incompatible elements, highCs/Rb and lowCe/Pb ratios, Ta and Ti relative depletion, high abundance in transition elements and highNi/Mg ratios. Pb isotope ratios are undistinguishable from those measured on Hercynian continental crust. Initial143Nd/144Nd ratios are between0.5120 (εi −5) and0.5122 (εi −1) for minettes and kersantites whereas initial87Sr/86Sr ratios vary between 0.7055–0.710 for minettes and 0.707–0.708 for kersantites. No simple mixing relations are visible on RbSr and SmNd isochron diagrams. The exceptional homogeneity of these geochemical characteristics along a 1000 km traverse does not allow for an hypothesis of enrichment through upper level assimilation and thus leads to propose that these rocks originated through melting of a mantle enriched by recycling of crustal material. 相似文献
During the last decade, it has been shown that accurate analyses of calcite twinning in thin section may allow computation of the paleo-deviatoric stress tensor associated with this deformation. Following from the work of Larroque and Laurent (1988), and Lacombe et al. (1989), this is a new application of the Etchecopar inverse method. Weakly deformed limestones from about 150 to 200 km north of the Pyrenean chain (South France) were studied. The Etchecopar inverse method, which can be used on a microcomputer, is comparable to the method of analysis of striated fault planes proposed by Etchecopar et al. in 1981, as it determines the principal stress orientations and the stress ellipsoid shape ratio φ = (σ2 − σ3)/(σ1 − σ3). The Etchecopar method using calcite twins has been selected for this study because it is suitable for the determination of polyphase deformation in coarse-grained limestones (Lacombe et al. 1989).
Ten samples of oolitic limestones, cemented with sparry calcite, from the Bajocian (170 Ma) and the Oligocene (30 Ma) were studied. For each of them, only one or two stress tensors were determined: the first is characterized by a principal compressive stress axis σ1 which is horizontal and approximately N-S. Local departures from this orientation have been observed and are interpreted as local stress perturbations. For the second, which was defined in the Oligocene, but occurred only locally in the Jurassic limestones, the position of σ1 is nearly vertical; the direction of extension σ3 is either NE-SW or undefined into the horizontal plane (σ2 = σ3); this radial extension is interpreted as the result of two or more superposed extensive deformation phases with vertical σ1. The N-S compression was never found in the Oligocene limestones, and from its orientation, it is assumed to correspond to the Pyrenean deformation. These results are compared to the more complex deformation pattern obtained from classical microtectonical studies (Arthaud and Choukroune, 1972; Bonijoly and Blès, 1983; Granier and Blès, 1988; Blès et al., 1989). Only the major tectonic events are recorded by calcite twinning. Finally, the suitability of calcite twin analyses for the determination of complex polyphase deformation is discussed. 相似文献
The Moselle river flows in the north-east of France, from Vosges Mountains to neighboring countries Luxembourg and Germany.
One of its tributaries, the Fensch river, drains a highly industrialized watershed, strongly impacted by mining, smelting
and surfacing activities. The objective of this work, part of a general research program on Moselle watershed (Zone Atelier
Moselle) was to assess the impact of the polluted Fensch river on the global quality of the Moselle river. For that purpose,
water, sediments and suspended particulate matter were sampled in both rivers, upstream and downstream the junction. Four
main sampling campaigns were carried out, in winter during a flood event and in spring at low water level. On a first step,
mineralogical analyses (XRD and FTIR) and chemical analyses (ICP-MS, ICP-AES), were performed on sediments, suspended particulate
matters and filtered waters. Major and trace elements concentrations were obtained on two different granulometric fractions
(0–2 mm and 0–50 μm) revealing the enrichment in heavy metals of fine particles. From one collecting campaign to another,
seasonal variations could be evidenced on suspended matter composition even though major minerals (calcite, quartz and kaolinite)
were always present. Furthermore, spatial variations were evidenced for Fensch and Moselle downstream sediments. Thus, very
fine-grained sediments, poorly crystallized, displaying at the same time higher metal concentrations and higher organic matter
content than in Fensch river material, were collected downstream, in a low hydrodynamic conditions zone, assumed as a preferential
sedimentary zone or even as a placer. Strong correlations could be revealed between iron content and contaminant concentrations,
confirming the origin of polluted material. 相似文献