The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

Mobility of aqueous contaminants at abandoned mining sites: insights from case studies in Sardinia with implications for remediation

Public awareness of environmental health issues has increased significantly in recent years, creating the need for detailed scientific studies that can identify potential environmental problems. This paper reports the results of hydrogeochemical surveys carried out in Sardinia, an Italian region with a long mining history. When mining operations in Sardinia ceased, actions for limiting the potential adverse effects of mine closure on the water system were not undertaken. Drainages from flooded mines and seeps from mining residues left on the ground are the main mining-related sources of contamination in Sardinia. Due to the proximity of mining sites to water resources and land that is within reach of animals and humans, the major risks to human health are associated with the direct discharge of contaminated waters into the streams and soils located down-gradient of the abandoned mines. Results of hydrogeochemical surveys carried out under different seasonal conditions showed that the dispersion of toxic and harmful elements (As, Cd, Ni, Pb, Sb and Zn) increases during the rainy season, especially under high runoff conditions. These results should help regional and national authorities to address present environmental regulations, particularly those regarding the quality of water resources. Furthermore, the results might be useful elsewhere for planning remediation actions at abandoned mining sites. Lessons learned by past mining in Sardinia indicate that correct disposal and management of mining residues should be mandatory from the beginning of exploitation and processing at each active mine. This would allow reduction of the environmental risks as well as the cost of remediation.     

Present day relief-shaping systems acting on the southern slope of the Făgăraş Mountains (Romania)

The present topography of the Făgăraş Mountains is a snapshot of the long-term evolution that brought about significant alterations of the landscape, and especially of the relief, which has acquired different features depending on the intensity of the relationship between the exogenous and endogenous agents. At present, relief shaping in the study area is controlled by the orographic and climatic features. However, the climate of the high and middle-height mountains is the main cause that determines the mechanism, the intensity and the spatial distribution of the shaping processes. The considerable height of the Făgăraş Mountains, which exceeds 2500 m altitude is responsible for the vertical zonation of climate and vegetation which implicitly induce the setting of the systems of relief modelling, too.     

Analysis of Unit Supporting Time and Support Installation Time for Open TBMs

Estimation of advance rate and utilization of tunnel boring machines (TBM) are some of the important steps in planning a TBM tunneling project. Estimation of the utilization factor depends on realistic analysis of downtime components. Among the different parameters influencing TBM downtime, tunnel support is the most influential factor, which can take up to 50% of the total excavation time in some cases. Although, there are some rock mass classification systems specifically developed to link ground conditions with the type and amount of support installed in TBM tunneling, the related downtime for support installation has not been studied in detail. Unit supporting time (UST) is the time required for the installation of ground support per unit length of tunnel. Support installation time (SIT) is the time required for installation of a single ground support element. In this paper, approximate ranges of UST and SIT are discussed and analyzed on the basis of recorded ground SIT from a number of TBM tunneling projects. The primary goal of this paper is to link UST with rock mass classifications that have been specifically developed to assess ground support requirements for different tunnel sections using open-type TBM. An accurate estimate of UST and SIT allows for realistic determination of the related downtime and TBM utilization rate.     

Sinkhole characterization in the Dead Sea area using airborne laser scanning

Since the early 1980s, the Dead Sea coast has undergone a near catastrophic land deterioration as a result of a rapid lake-level drop. One conspicuous expression of this deterioration is the formation of sinkholes fields that puncture the coastal plains. The evolution of sinkholes along nearly 70-km strip has brought to a halt the regional development in this well-known and toured area and destroyed existing infrastructures. Great efforts are being invested in understanding the phenomena and in development of monitoring techniques. We report in this paper the application of airborne laser scanning for characterization of sinkholes. We demonstrate first the appropriateness of laser scanning for this task and its ability to provide detailed 3D information on this phenomenon. We describe then an autonomous means for their extraction over large regions and with high level of accuracy. Extraction is followed by their detailed geometric characterization. Using this high-resolution data, we show how sinkholes of 0.5 m radius and 25 cm depth can be detected from airborne platforms as well as the geomorphic features surrounding them. These sinkhole measures account for their embryonic stage, allowing tracking them at an early phase of their creation.     

Indirect Effects of Salinity and Temperature on Kuwait’s Shrimp Stocks

Discharge of the Shatt Al-Arab is believed to be a dominating component of the northern Arabian Gulf’s ecology and largely responsible for productivity of Kuwait’s fisheries. With major construction of dams on the Tigris and Euphrates Rivers in Turkey, river discharge has been substantially reduced, and flooding essentially eliminated. We attempted to relate river flow and shrimp landings indirectly by correlating 19 years of salinity and temperature data from Kuwait’s waters with corresponding annual shrimp landings. For green tiger prawns (Penaeus semisulcatus), the combination of October salinities and January temperatures provided the best correlation (r = 0.67) with landings in the following shrimping season. For the combined landings of jinga and kiddi shrimps (Metapenaeus affinis and Parapenaeopsis stylifera, respectively), December salinity during season and May temperature prior to season resulted in the best correlation (r = 0.87). Landings of these two species also correlated well with spring and summer temperatures. Under normal conditions, late winter or early spring temperatures prior to fishing season influence recruitment of the green tiger prawn, whereas December salinities during harvest season influence the abundance of jinga–kiddi shrimps. With further reductions in the Shatt Al-Arab discharge and the elimination of flood events, Kuwait’s shrimp landings will most likely decrease over time.     

Dynamics of MTBE-degrading activity in porous media using a large-scale laboratory experiment

Methyl tert-butyl ether (MTBE) is an oxygenated organic compound that tends to form large groundwater contamination plumes. If bioaugmentation is used as a remediation technique, the question of the mobility of the bioactive zone (BAZ) with time is of interest. The objective of this experiment was to study the spatial redistribution of MTBE-biodegradation activity through time, following the injection of a bacterial culture in a homogeneous porous media, at high pressures and concentrations. The experiment was performed using a large-scale aquifer physical model, which can incorporate physicochemical heterogeneities similar to those found in the field, under controlled laboratory conditions. The experimental tank was filled with 1.0-mm-diameter glass beads to represent a homogeneous high hydraulic conductivity porous medium. During inoculation, the bacterial culture was distributed in a circular pattern. Initially it appeared that the BAZ was located in the upstream portion of the inoculated zone, where oxygen was available in conjunction with the inoculated bacteria and MTBE. With time, the BAZ moved upgradient through the whole tank towards the inlet. This implies the successful movement of bacteria from the inoculation area against advective flow into previously sterile zones of the tank. A mass balance showed that dissolved oxygen concentrations were likely not a limiting factor during the experiments.     

Examining potential genetic links between Jurassic porphyry Cu–Au ± Mo and epithermal Au ± Ag mineralization in the Toodoggone district of North-Central British Columbia,Canada

The Toodoggone district comprises Upper Triassic to Lower Jurassic Hazelton Group Toodoggone Formation volcanic and sedimentary rocks, which unconformably overlie submarine island-arc volcanic and sedimentary rocks of the Lower Permian Asitka Group and Middle Triassic Takla Group, some of which are intruded by Upper Triassic to Lower Jurassic plutons and dikes of the Black Lake suite. Although plutonism occurred episodically from ca. 218 to 191 Ma, the largest porphyry Cu–Au ± Mo systems formed from ca. 202 to 197 Ma, with minor mineralization occurring from ca. 197 to 194 Ma. Porphyry-style mineralization is hosted by small-volume (<1 km³), single-phase, porphyritic igneous stocks or dikes that have high-K calc-alkaline compositions and are comparable with volcanic-arc granites. The Fin porphyry Cu–Au–Mo deposit is anomalous in that it is 16 m.y. older than any other porphyry Cu–Au ± Mo occurrence in the district and has lower REEs. All porphyry systems are spatially restricted to exposed Asitka and Takla Group basement rocks, and rarely, the lowest member of the Hazelton Group (i.e., the ca. 201 Ma Duncan Member). The basement rocks to intrusions are best exposed in the southern half of the district, where high rates of erosion and uplift have resulted in their preferential exposure. In contrast, low- and high-sulfidation epithermal systems are more numerous in the northern half of the district, where the overlying Hazelton Group rocks dominate exposures. Cogenetic porphyry systems might also exist in the northern areas; however, if they are present, they are likely to be buried deeply beneath Hazelton Group rocks. High-sulfidation epithermal systems formed at ca. 201 to 182 Ma, whereas low-sulfidation systems were active at ca. 192 to 162 Ma. Amongst the studied epithermal systems, the Baker low-sulfidation epithermal deposit displays the strongest demonstrable genetic link with magmatic fluids; fluid inclusion studies demonstrate that its ore fluids were hot (>468°C), saline, and deposited metals at deep crustal depths (>2 km). Sulfur, C, O, and Pb isotope data confirm the involvement of a magmatic fluid, but also suggest that the ore fluid interacted with Asitka and Takla Group country rocks prior to metal deposition. In contrast, in the Shasta, Lawyers, and Griz-Sickle low-sulfidation epithermal systems, there is no clear association with magmatic fluids. Instead, their fluid inclusion data indicate the involvement of low-temperature (175 to 335°C), low-salinity (1 to 11 equiv. wt.% NaCl) fluids that deposited metals at shallow depths (<850 m). Their isotope (i.e., O, H, Pb) data suggest interaction between meteoric and/or metamorphic ore fluids with basement country rocks.     

Radiation-induced defects in quartz. III. Single-crystal EPR,ENDOR and ESEEM study of a peroxy radical

The X- and W-band single-crystal electron paramagnetic resonance spectra of an electron-irradiated natural quartz permit quantitative analysis of a ²⁹Si hyperfine structure (A ~12.6 MHz) and an ²⁷Al hyperfine structure (A ≤ 0.8 MHz) for a previously reported hole-like center. The ²⁹Si hyperfine structure arises from interaction with two equivalent Si atoms and is characterized by the direction of the unique A axis close to a Si–O bond direction. The ²⁷Al hyperfine structure, confirmed by pulsed electron nuclear double resonance and electron spin echo envelope modulation spectra, is characterized by the unique A axis approximately along a twofold symmetry axis. These ²⁹Si and ²⁷Al hyperfine data, together with published theoretical results on peroxy radicals in SiO₂ as well as our own density functional theory (DFT) calculations on model peroxy centers, suggest this hole-like center to have the unpaired spin on a pair of oxygen atoms linked to two symmetrically equivalent Si atoms and a substitutional Al³⁺ ion across the c-axis channel, a first peroxy radical in quartz. The nuclear quadrupole matrix P also suggests that the Al³⁺ ion corresponds closely to the diamagnetic precursor to the [AlO₄]⁰ center. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The influence of topography and land use on water quality of Xiangxi River in Three Gorges Reservoir region

A self-organizing map (SOM) was used to cluster the water quality data of Xiangxi River in the Three Gorges Reservoir region. The results showed that 81 sampling sites could be divided into several groups representing different land use types. The forest dominated region had low concentrations of most nutrient variables except COD, whereas the agricultural region had high concentrations of NO₃N, TN, Alkalinity, and Hardness. The sites downstream of an urban area were high in NH₃N, NO₂N, PO₄P and TP. Redundancy analysis was used to identify the individual effects of topography and land use on river water quality. The results revealed that the watershed factors accounted for 61.7% variations of water quality in the Xiangxi River. Specifically, topographical characteristics explained 26.0% variations of water quality, land use explained 10.2%, and topography and land use together explained 25.5%. More than 50% of the variation in most water quality variables was explained by watershed characteristics. However, water quality variables which are strongly influenced by urban and industrial point source pollution (NH₃N, NO₂N, PO₄P and TP) were not as well correlated with watershed characteristics.