Laboratory tests with interferometric optical fibre sensors to monitor shallow landslides triggered by rainfalls

Optical fibre–based sensors have now established their place in the field of geohazard monitoring due to their sensitivity to strain and temperature changes. Progressive development in the technology leads to the availability of novel, accurate and durable sensors at a relatively limited cost. This creates room for original monitoring applications that have been, so far, impeded by the shortcomings of conventional monitoring tools. In this work, we explore the applicability of an interferometric optical fibre sensor as a vibration sensing tool at laboratory scale. We tested the ability of the sensor to identify precursors of instability in a downscaled model of a rainfall-induced landslide composed of granular material. We carried out four experimental tests which involved different sensor deployments and soil mixtures. The recorded signals were processed by means of a time–frequency analysis and we identified two frequency-domain parameters—the spectral centroid and band power—that could provide information on the development of instability. Their ratio yielded a unique parameter through which a precursory stage could be outlined by defining a threshold value based on the data collected at the beginning of the experiment. In our lab tests, precursors of instability were detected 2–3 min before a crack was observed at the surface. This may upscale to a lead time of about 20–30 min or more in the field, classifying our monitoring approach in between an alarm and a warning system. The work presented here can be considered a first promising step towards an innovative monitoring system and shows the potential of optical fibre sensing as a shallow landslide monitoring technique, encouraging further testing, especially in real-case studies.

     

Comet classification with new methods for gas and dust spectroscopy

We present the results of a program of comet long-slit spectroscopy with the Kast Dual Spectrograph on the 3-m Shane Telescope at Lick Observatory. A total of 26 comets, from a variety of dynamical families, were observed on 39 different nights from 1996 to 2007. A new statistical method extracted the twilight sky from comet frames, because traditional sky subtraction techniques were inadequate. Because previously published Haser model parent and daughter scale lengths did not fit the data well, unbiased ranges of scale lengths were searched for the best-fitting pairs. Coma gas production rates for OH, CN, C₂, C₃, NH, NH₂, and OH confirmed the widely reported carbon-chain depletion for a sub-class of comets, most notably high-perihelion Jupiter-family comets observed at r_h > 1.5 AU, with different behaviors for C₂ and C₃. Our long-slit spectroscopy data was also adapted for the A(θ)fρ dust production parameter. The assumption that A(θ)fρ is constant throughout the nucleus was not upheld. High dust-to-gas ratios for comets with large perihelia were not a selection effect, and suggest that the dust was released earlier in the formation of the coma than the gas. The dust-to-gas ratio did not exhibit any evolutionary traces between different comet dynamical families. The comet survey illuminates the diversity among comets, including the unusually carbon poor Comet 96P/Machholz.     

Sediment and particulate phosphorus characteristics in grassed waterways from row crop corn and alfalfa fields collected by manual University of Exeter samplers and automatic sampling

Phosphorus (P) export from agricultural lands above known threshold levels can result in adverse impacts to receiving water quality. Phosphorus loss occurs in dissolved and sediment‐bound, or particulate phosphorous (PP), forms, with the latter often dominating losses from row‐cropped systems. To target practices, land managers need good computer models and model developers need good monitoring data. Sediment monitoring data (e.g. radiometric finger printing and sediment P sorption capacity) can help identify sediment source areas and improve models, but require more sediment mass than is typically obtained by automatic sampling. This study compares a simple suspended sediment sampler developed at the University of Exeter (UE) with automatic sampling in intermittent channels draining corn and alfalfa fields. The corn field had a greater runoff coefficient (27%) than alfalfa (11%). No differences were found in enrichment ratios (sediment constituent/soil constituent) in PP (PP_ER) or percent loss on ignition (LOI_ER) between paired UE samplers on corn. The median LOI_ER for the UE samplers (1·9%) did not differ significantly (p > 0·13) from the automatic sampler (2·0%). The PP_ER from the UE samplers was on average 20% lower than the automatic samplers. A correlation (r² = 0·75) was found between sediment PP and % LOI from automatic samplers and UE samplers for particles < 50 µm, while for > 50 µm PP concentration did not change with changes in % LOI. Sediment ammonium‐oxalate extractable metals were similarly related to LOI, with the strongest correlation for iron (r² = 0·71) and magnesium (r² = 0·70). Copyright © 2011 John Wiley & Sons, Ltd.     

The droughts of 1996–1997 and 2004–2005 in Amazonia: hydrological response in the river main‐stem

Severe hydrological droughts in the Amazon have generally been associated with strong El Niño events. More than 100 years of stage record at Manaus harbour confirms that minimum water levels generally coincide with intense warming in the tropical Pacific sea waters. During 2005, however, the Amazon experienced a severe drought which was not associated with an El Niño event. Unless what usually occurs during strong El Niño events, when negative rainfall anomalies usually affect central and eastern Amazon drainage basin; rainfall deficiencies in the drought of 2005 were spatially constrained to the west and southwest of the basin. In spite of this, discharge stations at the main‐stem recorded minimum water levels as low as those observed during the basin‐wide 1996–1997 El Niño‐related drought. The analysis of river discharges along the main‐stem and major tributaries during the drought of 2004–2005 revealed that the recession on major tributaries began almost simultaneously. This was not the case in the 1996–1997 drought, when above‐normal contribution of some tributaries for a short period during high water was crucial to partially counterbalance high discharge deficits of the other tributaries. Since time‐lagged contributions of major tributaries are fundamental to damp the extremes in the main‐stem, an almost coincident recession in almost all tributaries caused a rapid decrease in water discharges during the 2005 event. Copyright © 2010 John Wiley & Sons, Ltd.     

The El Teniente porphyry Cu–Mo deposit from a hydrothermal rutile perspective

Mineralogical, textural, and chemical analyses (EPMA and PIXE) of hydrothermal rutile in the El Teniente porphyry Cu–Mo deposit help to better constrain ore formation processes. Rutile formed from igneous Ti-rich phases (sphene, biotite, Ti-magnetite, and ilmenite) by re-equilibration and/or breakdown under hydrothermal conditions at temperatures ranging between 400°C and 700°C. Most rutile nucleate and grow at the original textural position of its Ti-rich igneous parent mineral phase. The distribution of Mo content in rutile indicates that low-temperature (∼400–550°C), Mo-poor rutile (5.4 ± 1.1 ppm) is dominantly in the Mo-rich mafic wallrocks (high-grade ore), while high-temperature (∼550-700°C), Mo-rich rutile (186 ± 20 ppm) is found in the Mo-poor felsic porphyries (low-grade ore). Rutile from late dacite ring dikes is a notable exception to this distribution pattern. The Sb content in rutile from the high-temperature potassic core of the deposit to its low-temperature propylitic fringe remains relatively constant (35 ± 3 ppm). Temperature and Mo content of the hydrothermal fluids in addition to Mo/Ti ratio, modal abundance and stability of Ti-rich parental phases are key factors constraining Mo content and provenance in high-temperature (≥550°C) rutile. The initial Mo content of parent mineral phases is controlled by melt composition and oxygen fugacity as well as timing and efficiency of fluid–melt separation. Enhanced reduction of SO₂-rich fluids and sulfide deposition in the Fe-rich mafic wallrocks influences the low-temperature (≤550°C) rutile chemistry. The data are consistent with a model of fluid circulation of hot (>550°C), oxidized (ƒO₂ ≥ NNO + 1.3), SO₂-rich and Mo-bearing fluids, likely exsolved from deeper crystallizing parts of the porphyry system and fluxed through the upper dacite porphyries and related structures, with metal deposition dominantly in the Fe-rich mafic wallrocks.     

Free cupric ion concentrations and Cu complexation in selected Swiss lakes and rivers

[Cu²⁺] and Cu complexation parameters in some selected freshwater systems in Switzerland were determined by the technique of ligand-exchange and DPCSV. Results from the water columns of some eutrophic and oligotrophic lakes are presented and compared to small acid lakes. Cu is strongly complexed by organic ligands which with very high stability constants at low concentrations are probably biologically produced, as indicated by the seasonal variations in the eutrophic lakes and by the relationship between Cu complexation and algal activity in the eutrophic (pCu=15–16), oligotrophic (pCu=13–14) and acidic (pCu=9–10) lakes. The extent of Cu complexation in river waters was generally lower than in the eutrophic lakes, at similar DOC levels. No obvious correlation between Cu complexation and DOC was observed, indicating that Cu complexing ligands are specific organic compounds.     

Hydrologic,geomorphic and climatic processes controlling willow establishment in a montane ecosystem

Willow communities dominate mid‐elevation riparian areas throughout the Rocky Mountains of North America. However, many willow stands are rapidly declining in aerial cover and individual plants in stature. A poor understanding of the processes that control willow establishment hinders identifying the causes of this decline. We analysed the processes that have facilitated or limited willow establishment over the last half of the 20th century on two large floodplains in Rocky Mountain National Park in Colorado by addressing two questions: (1) How does hydrologic regime control willow establishment on different fluvial landforms? (2) How might climate‐driven variations in hydrologic regime affect future willow establishment? We precisely aged willows on the three most common fluvial landforms, stream point bars, drained beaver ponds, and abandoned channels, and statistically related establishment dates to patterns of annual stream peak flow. The role of peak flow on willow establishment varied significantly by landform. Willow recruitment had occurred nearly every year on point bars. In former beaver complexes, most willows had established following dam breaches, whereas willows had established on abandoned channels for several years following channel avulsion. Establishment on point bars and abandoned channels was driven by peak flows of 2‐ to 5‐year return intervals, whereas in abandoned beaver ponds most establishment was associated with flow events of >5‐year return interval. Models of climate change suggest that temperatures will increase and precipitation seasonality will shift over the coming decades in the Rocky Mountains, leading to earlier spring runoff, lower summer and fall flows, decreased snowpack and decreased soil moisture. Such changes are likely to diminish opportunities for willow establishment. Copyright © 2005 John Wiley & Sons, Ltd.