Light curve and O−C diagram analysis of RZ Cassiopeiae

The aim of the present paper is to analyze the light variation as well as the period changes of the eclipsing binary RZ Cas. New photometric elements are computed using the frequency-domain method. The possibility of the light-time effect and the apsidal motion is discussed.     

Hα Photometry of Two Contact Binaries

We carried out optical and Hα photometry of two contact binaries (V861 Herculis, EQ Tauri). The light curve modeling revealed stellar spots in both contact systems and strong Hα excess in the position of the observed stellar spots. A correlation was found between the V−R and R−H_α colour indices of V861 Her.     

Beam Mode Expansion of Corrugated Conical Horns with Phase Correcting Lens: Application to Radioastronomy Receivers

A classical radioastronomy receiver is fed with a corrugated horn and an independent lens, both placed in a cryostat to lower the noise temperature. The beam is focused and directed using a combination of elliptical and plane mirrors. This paper proposes modifying the initial feeding system by placing the lens onto the horn aperture, thereby allowing a size reduction of the horn and lens, and a simplification of their mechanical design. The profiled lens is shaped to correct the phase error on the horn aperture. A quasi-optical model of the horn-plus-lens system has been developed using a Beam Mode Expansion (BME). Results using both a hyperbolic-planar lens and a spherical-elliptical lens, as well as results obtained by using Geometrical Optics (GO) with a Kirchoff–Huygens integration to get the far-field pattern, have been compared with measurements. As a direct application, a full focusing system for the new 40-m radiotelescope at the “Centro Astronómico de Yebes” is presented for the 22, 30 and 45 GHz bands. This paper has developed a QO model for a corrugated conical horn with a phase-correcting lens. This revised version was published online in July 2006 with corrections to the Cover Date.     

Geochemical specialization of the tin-bearing granitoid massifs of NW Bohemia

The geochemistry of Hercynian tin-bearing granitoid massifs of the Krune hory Mts. (Erzgebirge), Slavkovský les Forest (Kaiserwald) and Smriny (eastern Fichtelgebirge) is compared by statistical processing of 270 analyses including a wide spectrum of major and trace elements. Seven different types of granites are distinguished. Out of these, five types represent the successive differentiation of the largest massif of NW Bohemia: the Karlovy Vary (Karlsbad) massif. This comprises strongly differentiated peraluminous granites evolving towards extreme Li-Rb-Cs-F-and Sn-enrichment in the youngest members, which are albite-topaz-zinwaldite lithium granites. The sixth and seventh types are different from the former by their location in the eastern Krune hory and tectonic setting, and they display geochemical features of anorogenic granites: they are metaluminous albite-zinwaldite granites with marked enrichment of Nb, Y, and HREE in addition to Li, Rb, Cs, F and Sn, indicating contamination by sub-crustal material. Sn-W mineralizations, including flat peri-contact greisen bodies, steep greisen veins and tourmalinized phyllites, are all intimately associated with the most strongly differentiated granites — the Li-granite and the Cinovec-granite respectively.     

Impact evaluation on groundwater of the infiltration of an urban wastewater geopurification system placed over a detrital aquifer in a semiarid region (Spain)

Over a period of 4 years and 4 months, the geopurification installations at Dehesas de Guadix (Granada, Spain) were monitored to determine the impact on soil and groundwater of the controlled discharge of urban wastewater, and also to identify the best indicators of the entry of the recharged water into the aquifer. The installations are located in an area where the climate is Mediterranean sub-arid, with an average precipitation of less than 287 mm/year, and a rate of evapotranspiration that is almost three times greater. The system was controlled by determining the balance of majority nutrients and boron in the soil and in the groundwater, both at the points affected directly by the wastewater discharge and at others. The quantity of mass discharged was relatively large (COD 14,656 g/m², NO₃ 85 g/m², NO₂ 4 g/m², NH₄ 2,425 g/m², PO₄ 1,143 g/m², K 1,531 g/m², B 63 g/m²). It was observed that the elimination of nutrients within the soil (COD 97.5%, PO₄ 94.4%, K 59.17%, N _total 18.8%, B 12.69%) was very efficient except for the nitrogen, which nevertheless did not reach the groundwater, as it was eliminated at deep levels of the unsaturated zone. Only 12.69% of the boron was removed, and appreciable, increasing amounts of this element did reach the groundwater. Unexpectedly, none of the majority nutrients behaved as a reliable indicator of the impact on groundwater; despite this, the boron and the bicarbonate did clearly reflect the arrival of the recharged water, and are proposed as the best indicators.     

Experimental investigation of the effects of temperature and ionic strength on Mo isotope fractionation during adsorption to manganese oxides

The Mo stable isotope system is being applied to study changes in ocean redox. Such applications implicitly assume that Mo isotope fractionation in aqueous systems is relatively insensitive to frequently changing environmental variables such as temperature (T) and ionic strength (I). A major driver of fractionation is the adsorption of Mo to Mn oxyhydroxide surfaces [Barling J. and Anbar A. D. (2004) Molybdenum isotope fractionation during adsorption by manganese oxides. Earth Planet. Sci. Lett.217(3-4), 315-329]. Here, we report the results of experiments that determine the extent to which Mo isotope fractionation during adsorption of Mo to the Mn oxyhydroxide mineral birnessite is sensitive to T and I. The results are compared to new predictions from quantum chemical computations. We measured fractionation from 1 to 50 °C at I = 0.1 m and found that Δ^97/95Mo_{dissolved-adsorbed} varies from 1.9‰ to 1.6‰ over this temperature range. Experiments were also performed at 25 °C in synthetic seawater (I = 0.7); fractionation at this condition was the same within analytical error as in low ionic strength experiments. These findings confirm that the Mo isotope fractionation during adsorption to Mn oxyhydroxides is relatively insensitive to variations and T and I over environmentally relevant ranges. To relate these findings to potential mechanisms of Mo isotope fractionation, we also report results for density functional theory computations of the fractionation between and various possible structures of molybdic acid as a function of temperature. Because no plausible species fractionates from with a magnitude matching the experiments, we are left with three possibilities to explain the fractionation: (1) solvation effects on the vibrational frequencies of aqueous species considered thus far are significant, such that our calculations in vacuo yield inaccurate fractionations; (2) a trace aqueous species not yet considered fractionates from and then adsorbs to birnessite; or (3) a surface complex not present in solution forms on birnessite in which Mo is not tetrahedrally coordinated. Our findings help validate assumptions underlying paleoceanographic applications of the Mo isotope system and also lead us closer to understanding the mechanism of isotope fractionation during adsorption of Mo to Mn oxyhydroxides.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

On the basic principles of geophysical radioactive measurements

Summary The process of radon diffusion in space and time through rocks is treated in detail from the point of view of radiometric prospecting for oil. Taking into account the depth and diffusivity conditions encountered in nature it is stated that vertical radon diffusion reaching from the oil deposits up to the surface cannot be expected. Time intervals as required for setting in of a stationary concentration state and decay conditions of the radon lead to the conclusion that the penetration of emanometric measurements seldom exceeds the depth of 5–10 m.     

Zur Ermittlung der bestanschmiegenden Ebene zu einer Anzahl von,aus Erdbeben bestimmten Richtungen

Zusammenfassung Es werden mit Hilfe der sphärischen Trigonometrie und der Ausgleichsrechnung Methoden angegeben, die die Berechnung der bestanschmiegenden Ebene an eine Anzahl von Geraden mit einem gemeinsamen Punkt ermöglichen.

---

Summary With the aid of the spherical trigonometry and the adjustment, methods are given to determin the best-fitting plane for a given set of directions through a common point.