Geophysical survey to estimate the 3D sliding surface and the 4D evolution of the water pressure on part of a deep seated landslide

Geophysical surveys were conducted on the very unstable front part of the La Clapière landslide in the French Alps (Alpes Maritimes). The electrical resistivity survey was carried out to obtain, for the first time on this deep-seated landslide, 3D information on the slipping surface and the vertical drained faults. Moreover, we planned to follow within time (6 months) the evolution of the saturated zones (presence of gravitational water) and their percolation into the shearing zones. Our 4D results showed the importance of the complex water channelization within the slope and relation to geological discontinuities.     

Isotope measurements and ground water flow modeling using MODFLOW for understanding environmental changes caused by a well field in semiarid Brazil

Measurements of the environmental isotopes carbon-14 and oxygen-18 and of the electrical conductivity in ground water, together with MODFLOW-88 (DOS) simulations of pumping tests, were used to achieve a detailed understanding of the functioning of an aquifer in the area of a well field. The methodology was applied in the sedimentary basin of the Cariri region, in the south of Ceará State in Brazil. Localized hydraulic connections between adjacent aquifer units could be detected, and mixing ratios for the contributions from the units involved were determined. Cone of depression simulations for a three-year drought period revealed well interference and a drastic lowering of the piezometric level, thereby explaining the hydrogeologic changes and transformations in vegetation that were observed in the area of the well field. The combined use of the modeling tools and the geochemical field observations is shown to provide more detailed insight into the conceptual model of the groundwater flow system.     

L'érosion chimique et l'érosion mécanique à long terme du substrat granitique (Vendée,France)

We calculate the chemical depletion fraction of the granitic bedrock by analysing the rock-soil enrichment of zirconium. In Vendée (France), chemical weathering rates account for 26% of the denudation rates. Such a chemical depletion fraction characterizes temperate regimes. It is three times lower than that of humid tropical regimes. To cite this article: J.-C. Maurin et al., C. R. Geoscience 337 (2005).     

Responses of Ras El Bar seafloor characteristics to the protective engineering structures, Nile delta, Egypt

Bathymetry of the seafloor in the area in front of Ras El Bar coast, the characters of the seafloor sediments and the effects of protective structures on seafloor bathymetry were examined. Seafloor depths in front of Ras El Bar seawall ranged between 2 and 4 m. These depths, coupled with wave climate, result in waves breaking directly onto the wall and exerting high, dynamic pressures on the area at the structure’s toe. The sandy seafloor in front of the wall has been scoured. Sea water has undermined the wall causing removal of sediment, destabilization of its slope and the whole face of the wall has slipped. Toe protection in the form of a rocky apron is required to prevent such damage. West of the seawall, the constructed breakwater system has affected the bathymetry of the seafloor in the area. Shoaling and submerged spits have been formed in the shadow of each breakwater unit. The gaps between the breakwater units have attained deep depths and steep slopes. Scours and steep slopes adjacent to the head of the breakwater units have been recorded. Seaward of the breakwater system, deeper depths and gentle slopes characterize the seafloor. Offshore–onshore current and sediment movements toward the northeast is inferred from the configuration of the bottom contour lines.     

Geoelectrical and hydrogeochemical studies for delineating seawater intrusion in the outlet of Wadi Ham, UAE

The Quaternary aquifer of Wadi Ham, UAE has been overexploited during the last two decades to meet the increasing water demands. As a result, the dynamic balance between freshwater and seawater has been disturbed and the quality of the groundwater has deteriorated. In this paper, a 2D earth resistivity survey was conducted in Wadi Ham in the area between Fujairah and Kalba to delineate the seawater intrusion. Existing monitoring wells were used to measure the horizontal and vertical variations in water salinity and thus to improve the interpretation of earth resistivity imaging data. Results of vertical electrical soundings and chemical analyses of collected water samples were used to obtain an empirical relationship between the inferred earth resistivity and the amount of total dissolved solids. This relationship was used along with the true resistivity sections resulting from the inversion of 2D resistivity data to identify three zones of water-bearing formation (fresh, brackish, and salt-water zones). Along the four 2D resistivity profiles, the depth to the fresh-brackish interface exceeded 50 m at the western part of the area and was in the order of 10 m or less in the eastern side near the shoreline. Depth to the brackish-saline water interface reached about 70 m in the western side and was in the order of 20 m in the eastern side. The thickness of the fresh water zone decreases considerably in the farming areas toward Kalba and thus the degree of seawater intrusion increases.     

Stratigraphy of the Middle Devonian boundary: Formal definition of the susceptibility magnetostratotype in Germany with comparisons to sections in the Czech Republic, Morocco and Spain

One major difficulty in geology is high-resolution correlation among widely separated sections, especially in the Paleozoic where magnetostratigraphy polarity is not well established because rocks are often remagnetized, where critical biostratigraphic zonation may be poor or lacking, or where structural complexities make correlations very difficult. To address this problem, we have been using magnetostratigraphy susceptibility measurements. Here, we report our work from the Middle Devonian in Europe and North Africa. The Middle Devonian (Emsian–Eifelian) global boundary stratotype section and point (GSSP), located in the Eifel Hills, western Germany, was ratified by the International Subcommission on Stratigraphy in 1985, after careful evaluation of the biostratigraphy for this and many other sections. The boundary interval has been characterized using biostratigraphy, and the beginning of the Eifelian stage has been specifically defined by the first occurrence of the conodont Polygnathus costatus partitus. We have collected the Eifel Hills section for magnetic susceptibility (MS) measurement and here we establish it as the magnetostratotype for the Emsian–Eifelian stage boundary, by formally defining the magnetostratigraphy susceptibility for the section. We then collected, measured and compared the magnetostratotype to four other sections for which conodont biostratigraphy has been studied and where P. costatus partitus is present; two Emsian–Eifelian sections in Morocco and two sections in the Czech Republic (including the Emsian–Eifelian parastratotype). Finally, we have measured the MS for the El Puerto Creek section in the Cantabrian Mountains of Spain and identified the location of the Emsian–Eifelian boundary within the section based on MS comparison to the GSSP in conjunction with excellent biostratigraphic indicators, primarily brachiopods. While the conodont zonation in the El Puerto Creek section is poorly defined, we believe that the correspondence between the MS and biostratigraphy in the section allows the identification of the Emsian–Eifelian boundary. These results indicate that this method can be successfully applied to marine sequences where ambiguities in correlation exist.     

Plate Motion of India and Interseismic Strain in the Nepal Himalaya from GPS and DORIS Measurements

We analyse geodetically estimated deformation across the Nepal Himalaya in order to determine the geodetic rate of shortening between Southern Tibet and India, previously proposed to range from 12 to 21 mm yr^?1. The dataset includes spirit-levelling data along a road going from the Indian to the Tibetan border across Central Nepal, data from the DORIS station on Everest, which has been analysed since 1993, GPS campaign measurements from surveys carried on between 1995 and 2001, as well as data from continuous GPS stations along a transect at the logitude of Kathmandu operated continuously since 1997. The GPS data were processed in International Terrestrial Reference Frame 2000 (ITRF2000), together with the data from 20 International GNSS Service (IGS) stations and then combined using quasi- observation combination analysis (QOCA). Finally, spatially complementary velocities at stations in Southern Tibet, initially determined in ITRF97, were expressed in ITRF2000. After analysing previous studies by different authors, we determined the pole of rotation of the Indian tectonic plate to be located in ITRF2000 at 51.409±1.560° N and ?10.915±5.556°E, with an angular velocity of 0.483±0.015°. Myr^?1. Internal deformation of India is found to be small, corresponding to less than about 2 mm yr^?1 of baseline change between Southern India and the Himalayan piedmont. Based on an elastic dislocation model of interseismic strain and taking into account the uncertainty on India plate motion, the mean convergence rate across Central and Eastern Nepal is estimated to 19±2.5 mm yr^?1, (at the 67% confidence level). The main himalayan thrust (MHT) fault was found to be locked from the surface to a depth of about 20 km over a width of about 115 km. In these regions, the model parameters are well constrained, thanks to the long and continuous time-series from the permanent GPS as well as DORIS data. Further west, a convergence rate of 13.4±5 mm yr^?1, as well as a fault zone, locked over 150 km, are proposed. The slight discrepancy between the geologically estimated deformation rate of 21±1.5 mm yr^?1 and the 19±2.5 mm yr^?1 geodetic rate in Central and Eastern Nepal, as well as the lower geodetic rate in Western Nepal compared to Eastern Nepal, places bounds on possible temporal variations of the pattern and rate of strain in the period between large earthquakes in this region.     

Seasonal ecosystem variability in remote mountain lakes: implications for detecting climatic signals in sediment records

Weather variation and climate fluctuations are the main sources of ecosystem variability in remote mountain lakes. Here we describe the main patterns of seasonal variability in the ecosystems of nine lakes in Europe, and discuss the implications for recording climatic features in their sediments. Despite the diversity in latitude and size, the lakes showed a number of common features. They were ice-covered between 5–9 months, and all but one were dimictic. This particular lake was long and shallow, and wind action episodically mixed the water column throughout the ice-free period. All lakes showed characteristic oxygen depletion during the ice-covered-period, which was greater in the most productive lakes. Two types of lakes were distinguished according to the number of production peaks during the ice-free season. Lakes with longer summer stratification tended to have two productive periods: one at the onset of stratification, and the other during the autumn overturn. Lakes with shorter stratification had a single peak during the ice-free period. All lakes presented deep chlorophyll maxima during summer stratification, and subsurface chlorophyll maxima beneath the ice. Phosphorus limitation was common to all lakes, since nitrogen compounds were significantly more abundant than the requirements for the primary production observed. The major chemical components present in the lakes showed a short but extreme dilution during thawing. Certain lake features may favour the recording of particular climatic fluctuations, for instance: lakes with two distinct productive periods, climatic fluctuations in spring or autumn (e.g., through chrysophycean cysts); lakes with higher oxygen consumption, climatic factors affecting the duration of the ice-cover (e.g., through low-oxygen tolerant chironomids); lakes with higher water retention time; changes in atmospheric deposition (e.g., through carbon or pigment burial); lakes with longer stratification, air temperature changes during summer and autumn (e.g., through all epilimnetic species).     

Simultaneous inversion for velocity structure and hypocenters in Slovenia

We use nearly 2100 P-wave arrival times from 166 local earthquakes to investigate the 3-D compressional velocity structure of the upper crust of Slovenia using the simultaneous inversion algorithm developed by (Michelini and McEvilly, 1991). Remarkable and stable features of the resolved model are the relatively high velocities in western Slovenia and the low velocities in central Slovenia, SE of the Ljubljana basin. The boundary between these two anomalies follows approximately the NNW-SSE direction that coincides with the general strike of the External Dinarides. We interpret this feature as the upper crustal expression caused by the tectonic processes occurring along the active margin of the Adria promontory/microplate.