Food with a visible face: Traceability and the public promotion of private governance in the Japanese food system

The years since 2000 have seen a constant stream of high-profile scandals relating to food safety and food labeling in Japan. One response of Japan’s Ministry of Agriculture, Forestry and Fisheries (MAFF) has been to promote food traceability as a mechanism to improve food safety and to provide reliable information to consumers about their food. MAFF’s main approach to traceability promotion, however, has not involved making traceability mandatory (as has been done in the EU) but encouraging private companies to adopt it. These actions constitute, I argue, an example of the public promotion of private governance. When viewed against the literature on the private governance of food safety and quality, MAFF’s traceability activities are surprising for three reasons: their forms and extent, the relative lack of interest the Ministry has shown in third-party certification, and the way MAFF has responded to concerns about the safety of imported food by focusing almost entirely on domestic traceability. I also argue, however, that looking at the literature from a Japanese perspective suggests that public encouragement is more central to the rise of private governance in the global agri-food system than is usually appreciated.     

Visualization-based analysis of structural and dynamical properties of simulated hydrous silicate melt

We have explored first-principles molecular dynamics simulation data for hydrous MgSiO₃ liquid (with 10 wt% water) to gain insight into its structural and dynamical behavior as a function of pressure (0–150 GPa) and temperature (2,000–6,000 K). By visualizing/analyzing a number of parameters associated with short- and mid-range orders, we have shown that the melt structure changes substantially on compression. The speciation of the water component at low pressures is dominated by the isolated structures (with over 90% hydrogen participated) consisting of hydroxyls, water molecules, O–H–O bridging and four-atom (O–H–O–H and H–O–H–O) groups, where every oxygen atom may be a part of polyhedron or free (i.e., bound to only magnesium atom). Hydroxyls favor polyhedral sites over magnesium sites whereas molecular water is almost entirely bound to magnesium sites, and also interpolyhedral bridging (Si–O–H–O–Si) dominates other types of bridging. Water content is shown to enhance and suppress, respectively, the proportions of hydroxyls and molecular water. As compression increases, these isolated structures increasingly combine with each other to form extended structures involving a total of five or more O and H atoms and also containing threefold coordination species, which together consume over 80% hydrogen at the highest compression studied. Our results show that water lowers the mean coordination numbers of different types including all cation–anion environments. The hydrous melt tends to be more tetrahedrally coordinated but with the Si–Si network being more disrupted compared to the anhydrous melt. Protons increase the content of non-bridging oxygen and decrease the contents of bridging oxygen as well as oxygen triclusters (present at pressures above 10 GPa). The calculated self-diffusion coefficients of all atomic species are enhanced in the presence of water compared to those of the anhydrous melt. This is consistent with the prediction that water depolymerizes the melt structure at all pressures. Our analysis also suggests that proton diffusion involves two processes—the transfer of H atoms (requiring the rupture and formation of O–H bonds) and the motion of hydroxyls as hydrogen carriers (requiring the rupture and formation of Si–O and/or Mg–O bonds). Both the processes are operative at low compression whereas only the first process is operative at high compression.     

EPR investigation of NO2 and CO2 − and other radicals in beryl

A number of different impurities are located in the open channels of natural beryl crystals. The rare Maxixe beryl contains an unusual amount of NO₂. The isoelectronic CO₂ ⁻ radical is found in the irradiated Maxixe-type beryl. The NO₂ radicals are distributed in the Be–Al plane of the crystal, with the nitrogen atom close to the oxygens of the beryl cavity wall. These oxygens repel the negative CO₂ ⁻ radical, which is located at the center of the beryl cavity and rotates around its O–O axis, which is parallel to the crystal c-axis. When there is a nearby alkali ion at the center of the beryl channel, it reorients the CO₂ ⁻ radical so that its bisector is parallel to the c-axis and points toward the positive ion. Different signals are analyzed for Li⁺, Na⁺, and another counter-ion, which probably is Cs⁺. The related NO₃ and CO₃ ⁻ radicals are the color centers in the investigated deep blue beryls. The slow decay of the color, which makes these beryls useless as gem stones, is related to the decay of the hydrogen atoms which are present in these crystals. Evidence is given that NO₃ is created in Maxixe beryl by a natural process, while CO₃ ⁻ in Maxixe-type beryl has been created by irradiation. The temperature dependence of the EPR signals of these two radicals was investigated, but a definitive proof that they rotate at the center of the beryl cavity could not be given. EPR signals from some other radicals in beryl have been observed and described.     

Raman spectroscopic study of PbCO3 at high pressures and temperatures

Cerussite (PbCO₃) has been investigated by high-pressure and high-temperature Raman spectroscopy up to pressures of 17.2 GPa and temperatures of 723 K. Two pressure induced phase transitions were observed at about 8.0(2) and 16.0(2) GPa, respectively. The post-aragonite transition (PbCO₃-II) at 8.0(2) GPa is accompanied by softening of the v ₂-out-of-plane mode of the CO ₃ ^2? group and disappearance of the B_1g (v ₄-in-plane band of the CO ₃ ^2? group) mode. Stronger shifts of the carbonate group modes after the phase transition suggest that the new structure is more compressible. The formation of a second high-pressure polymorph begins at about 10 GPa. It is accompanied by the occurrence of three new bands at different pressures and splitting of the v ₁-symmetric C–O stretching mode of the CO ₃ ^2? group. The transitions are reversible on pressure release. A semi-quantitative phase diagram for PbCO₃ as a function of pressure and temperature is proposed.     

Hydrodynamic Performance of A Porous-Type Land-Fixed Oscillating Water Column Wave Energy Converter

A hybrid, porous breakwater-Oscillating Water Column(OWC) Wave Energy Converter(WEC) system is put forward and its hydrodynamic performance is investigated using the fully nonlinear, open-source computational fluid dynamics(CFD) model, OpenFOAM. The permeable structure is positioned at the weather side of the OWC device and adjoined to its front wall. A numerical modelling approach is employed in which the interstices within the porous structure are explicitly defined. This permits the flow fiel...     

Buried pockmarks on the Top Chalk surface of the Danish North Sea and their potential significance for interpreting palaeocirculation patterns

Three-dimensional (3D) seismic data from the southern Danish North Sea were used to analyse the morphology and spatial distribution of depressions in the Danian Chalk deposit. Previously, these depressions were either interpreted as karst structures or pockmarks. The observed depressions occur in an interval from 25 ms below to 12 ms above the Top Chalk surface. Three types of depressions were differentiated based on their plan-view geometry and their degree of symmetry: Type 1, comprising sub-circular and symmetrical depressions, is the dominant group (ca. 70 %). Type 2, elongated and symmetrical depressions, represents only a small fraction (ca. 5 %). The elongated and asymmetrical depressions of Type 3 compose ca. 25 %. In cross section, each depression type can be either characterised by a V- or a U-shape. The maximum size of the depressions ranges from 50 to 580 m, with an average internal depth of 10 m. We interpret the depressions as pockmarks formed by the expulsion of biogenic or thermogenic fluids at the Danian seafloor. Likely, the initial form of the pockmarks has been circular (Type 1) and was subsequently modified for Types 2 and 3 to an elongated form by currents. The long axis of the pockmarks is interpreted to represent the effective current direction. The inferred direction is sub-parallel to the palaeobathymetric contours. The 3D seismic interpretation of pockmarks presented in this paper contributes to the understanding of fluid migration and palaeocirculation patterns during the sedimentation of the terminal Chalk Group in the southern Danish North Sea.     

Archean to Recent aeolian sand systems and their sedimentary record: Current understanding and future prospects

The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand‐sea or dunefield (erg) deposits, whereas coastal systems are primarily known from the Cenozoic. The complexity of aeolian sedimentary processes and facies variability are under‐represented and excessively simplified in current facies models, which are not sufficiently refined to reliably account for the complexity inherent in bedform morphology and migratory behaviour, and therefore cannot be used to consistently account for and predict the nature of the preserved sedimentary record in terms of formative processes. Archean and Neoproterozoic aeolian successions remain poorly constrained. Palaeozoic ergs developed and accumulated in relation to the palaeogeographical location of land masses and desert belts. During the Triassic, widespread desert conditions prevailed across much of Europe. During the Jurassic, extensive ergs developed in North America and gave rise to anomalously thick aeolian successions. Cretaceous aeolian successions are widespread in South America, Africa, Asia, and locally in Europe (Spain) and the USA. Several Eocene to Pliocene successions represent the direct precursors to the present‐day systems. Quaternary systems include major sand seas (ergs) in low‐lattitude and mid‐latitude arid regions, Pleistocene carbonate and Holocene–Modern siliciclastic coastal systems. The sedimentary record of most modern aeolian systems remains largely unknown. The majority of palaeoenvironmental reconstructions of aeolian systems envisage transverse dunes, whereas successions representing linear and star dunes remain under‐recognized. Research questions that remain to be answered include: (i) what factors control the preservation potential of different types of aeolian bedforms and what are the characteristics of the deposits of different bedform types that can be used for effective reconstruction of original bedform morphology; (ii) what specific set of controlling conditions allow for sustained bedform climb versus episodic sequence accumulation and preservation; (iii) can sophisticated four‐dimensional models be developed for complex patterns of spatial and temporal transition between different mechanisms of accumulation and preservation; and (iv) is it reasonable to assume that the deposits of preserved aeolian successions necessarily represent an unbiased record of the conditions that prevailed during episodes of Earth history when large‐scale aeolian systems were active, or has the evidence to support the existence of other major desert basins been lost for many periods throughout Earth history?     

Glacial and periglacial buzzsaws: fitting mechanisms to metaphors

The buzzsaw hypothesis refers to the potential for glacial and periglacial processes to rapidly denude mountains at and above glacier Equilibrium Line Altitudes (ELAs), irrespective of uplift rates, rock type or pre-existing topography. Here the appropriateness of the buzzsaw metaphor is examined alongside questions of the links between glacial erosion and ELAs, and whether the glacial system can produce low-relief surfaces or limit summit heights. Plateau fragments in mountains on both active orogens and passive margins that have been cited as products of glacial and periglacial buzzsaw erosion instead generally represent dissected remnants of largely inherited, pre-glacial relief. Summit heights may correlate with ELAs but no causal link need be implied as summit erosion rates are low, cirque headwalls may not directly abut summits and, on passive margins, cirques are cut into pre-existing mountain topography. Any simple links between ELAs and glacial erosion break down on passive margins due to topographic forcing of ice-sheet growth, and to the km-scale vertical swaths through which ELAs have shifted through the Quaternary. Glaciers destroy rather than create low-relief rock surfaces through the innate tendency for ice flow to be faster, thicker and warmer along valleys. The glacial buzzsaw cuts down.     

Whipple telescope observations of LS I +61 303: 2004–2006

In this paper we present the results of the past two years observations on the galactic microquasar LS I +61 303 with the Whipple 10 m gamma-ray telescope. The recent MAGIC detection of the source between 200 GeV and 4 TeV suggests that the source is periodic with very high energy (VHE) gamma-ray emission linked to its orbital cycle. The entire 50-hour data set obtained with Whipple from 2004 to 2006 was analyzed with no reliable detection resulting. The upper limits obtained in the 2005–2006 season covered several of the same epochs as the MAGIC Telescope detections, albeit with lower sensitivity. Upper limits are placed on emission during the orbital phases of 0→0.1 and 0.8→1, phases which are not included in the MAGIC data set.