Hydrological and hydrodynamic modeling for flood damage mitigation in Brahmani–Baitarani River Basin,India

Stream flow forecast and its inundation simulations prior to the event are an effective and non-structural method of flood damage mitigation. In this paper, a continuous simulation hydrological and hydrodynamic model was developed for stream flow forecast and for spatial inundation simulation in Brahmani–Baitarani river basin, India. The hydrologic modelling approach includes rainfall-run-off modelling, flow routing, calibration and validation of the model with the field discharge data. CARTOSAT Digital Elevation Model of 30 m resolution, land use/land cover derived from the Indian Remote Sensing Satellite (IRS-P6) AWiFS and soil textural data of the study area were used in the modelling to compute topographic and hydraulic parameters. The hydrological model was calibrated with the help of field observed discharge data of 2006 and 2009 and validated with the data of 2008 and 2011. From the results, it is found that computed discharges are very well matching well with the observed discharges. The developed model can provide the stream flow forecast with more than 30 h lead time. Possible flood inundations were simulated using hydrodynamic modelling approach. CARTO Digital Elevation Model of 10 m resolution, landuse and the computed flood hydrographs were used in inundation simulations.     

A comparative analysis of pansharpening techniques on QuickBird and WorldView-3 images

Nowadays, different image pansharpening methods are available, which combine the strengths of different satellite images that have different spectral and spatial resolutions. These different image fusion methods, however, add spectral and spatial distortions to the resultant images depending on the required context. Therefore, a careful selection of the fusion method is required. Simultaneously, it is also essential that the fusion technique should be efficient to cope with the large data. In this paper, we investigated how different pansharpening algorithms perform, when applied to very high-resolution WorldView-3 and QuickBird satellite images effectively and efficiently. We compared these 27 pansharpening techniques in terms of quantitative analysis, visual inspection and computational complexity, which has not previously been formally tested. In addition, 12 different image quality metrics available in literature are used for quantitative analysis purpose.     

Analysis of urban built-up areas and surface urban heat island using downscaled MODIS derived land surface temperature data

Regional scale urban built-up areas and surface urban heat islands (SUHI) are important for urban planning and policy formation. Owing to coarse spatial resolution (1000 m), it is difficult to use Moderate Resolution Imaging Spectroradiometer (MODIS) Land surface temperature (LST) products for mapping urban areas and visualization, and SUHI-related studies. To overcome this problem, the present study downscaled MODIS (1000 m resolution)-derived LST to 250 m resolution to map and visualize the urban areas and identify the basic components of SUHI over 12 districts of Punjab, India. The results are compared through visual interpretation and statistical procedure based on similarity analysis. The increased entropy value in the downscaled LST signifies higher information content. The temperature variation within the built-up and its environs is due to difference in land use and is depicted better in the downscaled LST. The SUHI intensity analysis of four cities (Ludhiana, Patiala, Moga and Vatinda) indicates that mean temperature in urban built-up core is higher (38.87 °C) as compared to suburban (35.85 °C) and rural (32.41 °C) areas. The downscaling techniques demonstrated in this paper enhance the usage of open-source wide swath MODIS LST for continuous monitoring of SUHI and urban area mapping, visualisation and analysis at regional scale. Such initiatives are useful for the scientific community and the decision-makers.     

Motion Analysis in SAR Images of Unfocused Objects Using Time–Frequency Methods

Synthetic aperture radar (SAR) image formation processing assumes that the scene is stationary, and to focus an object, one coherently sums a large number of independent returns. Any target motion introduces phases that distort and/or translate the target's image. Target motion produces a smear primarily in the azimuth direction of the SAR image. Time-frequency (TF) modeling is used to analyze and correct the residual phase distortions. An interactive focusing algorithm based on TF modeling demonstrates how to correct the phase and to rapidly focus the mover. This is demonstrated on two watercraft observed in a SAR image. Then, two time-frequency representations (TFRs) are applied to estimate the motion parameters of the movers or refocus them or both. The first is the short-time Fourier transform, from which a velocity profile is constructed based on the length of the smear. The second TFR is the time-frequency distribution series, which is a robust derivative of the Wigner-Ville distribution that works well in this SAR environment. The smear is a modulated chirp, from which a velocity profile is plotted and the phase corrections are integrated to focus the movers. The relationship between these two methods is discussed. Both methods show good agreement on the example.     

Evaluating a thermal image sharpening model over a mixed agricultural landscape in India

Fine spatial resolution (e.g., <300 m) thermal data are needed regularly to characterise the temporal pattern of surface moisture status, water stress, and to forecast agriculture drought and famine. However, current optical sensors do not provide frequent thermal data at a fine spatial resolution. The TsHARP model provides a possibility to generate fine spatial resolution thermal data from coarse spatial resolution (≥1 km) data on the basis of an anticipated inverse linear relationship between the normalised difference vegetation index (NDVI) at fine spatial resolution and land surface temperature at coarse spatial resolution. The current study utilised the TsHARP model over a mixed agricultural landscape in the northern part of India. Five variants of the model were analysed, including the original model, for their efficiency. Those five variants were the global model (original); the resolution-adjusted global model; the piecewise regression model; the stratified model; and the local model. The models were first evaluated using Advanced Space-borne Thermal Emission Reflection Radiometer (ASTER) thermal data (90 m) aggregated to the following spatial resolutions: 180 m, 270 m, 450 m, 630 m, 810 m and 990 m. Although sharpening was undertaken for spatial resolutions from 990 m to 90 m, root mean square error (RMSE) of <2 K could, on average, be achieved only for 990–270 m in the ASTER data. The RMSE of the sharpened images at 270 m, using ASTER data, from the global, resolution-adjusted global, piecewise regression, stratification and local models were 1.91, 1.89, 1.96, 1.91, 1.70 K, respectively. The global model, resolution-adjusted global model and local model yielded higher accuracy, and were applied to sharpen MODIS thermal data (1 km) to the target spatial resolutions. Aggregated ASTER thermal data were considered as a reference at the respective target spatial resolutions to assess the prediction results from MODIS data. The RMSE of the predicted sharpened image from MODIS using the global, resolution-adjusted global and local models at 250 m were 3.08, 2.92 and 1.98 K, respectively. The local model consistently led to more accurate sharpened predictions by comparison to other variants.     

Hyperspectral anomaly detection within the signal subspace

This letter describes the extension of signal subspace processing (SSP) to the arena of anomaly detection. In particular, we develop an SSP-based, local anomaly detector that exploits the rich information available in the multiple bands of a hyperspectral (HS) image. This SSP approach is based on signal processing considerations, and its entire formulation reduces to a straightforward (and intuitively pleasing) geometric and algebraic development. We extend the basic SSP concepts to the HS anomaly detection problem, develop an SSP HS anomaly detector, and evaluate this algorithm using multiple HS data files.     

Remote sensing study of granulitic terrain in parts of Gujarat and Rajasthan

The geology of northwestern part of Indian peninsula is considered to be important due to complete preservation of rocks from Archaean to Upper Proterozoic. Further, these rocks have served as ideal host of varieties of economic minerals. The present work is an attempt to study the structurally deformed granulitic terrain in parts of Gujarat and Rajasthan in light of remote sensing. The study area falls under Sirohi, Banas Kantha and Sabar Kantha districts of Rajasthan and Gujarat. Remote sensing technique is utilized for the understanding of structural geology and deciphering the shear pattern. The methods adopted in this study include generation of False Color Composite (FCC) of satellite data, interpretation of lineaments from FCC and study the drainage pattern, structural basin delineation, profiling, and field mapping. It is observed that the area has undergone extensive deformation. There are two major sets of lineaments interpreted in the granulitic terrain such as WNW-ESE and NE-SW directions. Majority of the WNW-ESE lineaments are brittle in nature and N-S, NE-SW trending lineaments are ductile in nature. Overall the study area bifurcated into seven structural basins comprises of basic granulites, calc granulites and pelitic granulites.     

Application of S-SEBI model for crop evapotranspiration using Landsat-8 data over parts of North India

Estimation and monitoring of crop evapotranspiration (ET_c) or consumptive water use over large-area holds the key to irrigation management plans and regional drought preparedness. The objective of this study was to estimate ET_c by applying the simplified-surface energy balance index (S-SEBI) model to Landsat-8 data for the 2014–2015 period in parts of North India. An average ET_c was estimated 2.72 and 2.47 in mm day^?1 with 0.22, 0.18 standard deviation and 0.11, 0.07 standard error for Kharif and Rabi crops, respectively. On validation part, a close relationship was observed between S-SEBI derived and scintillometer observed evaporative fraction with 0.85 correlation coefficient and 0.86 agreement index. The statistical analysis also endorses the results accuracy and reliability with 0.026 and 0.602, relative root-mean square errors and model efficiency for wheat crop, respectively. The study showed that normalized difference vegetation index and LST are closely related and serve as a proxy for qualitative representation of ET_c.     

Estimating surface ice velocity on Chhota Shigri glacier from satellite data using Particle Image Velocimetry (PIV) technique

Information about the surface ice velocity is one of the important parameters for Mass balance and Glacier dynamics. This study estimates the surface ice velocity of Chhota Shigri glacier using Landsat (TM/ETM+) and ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) temporal data-sets from a period of 2009 to 2016 and 2006 to 2007, respectively. A correlation based Particle Image Velocimetry (PIV) technique has been used for the estimation of surface ice velocity. This technique uses multiple window sizes in the same data-set. Four window sizes (low, medium, high, very high) are used for each image pair. Estimated results have been compared with the published data. The outcomes attained from the medium window size closely matches with the published results. The estimated mean surface ice velocities of medium window size are 24 and 28.5 myr^?1 for 2009/2010 and 2006/2007 images pair. Highest velocity is observed in middle part of the glacier while lowest in the accumulation zone of the glacier.     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.