A 2-year study of soil tillage and cattle manure application effects on soil fauna populations under Zea Mays cultivation, in western Iran (Sanandaj)

The absence of environmentally sensitive soil management systems can be considered as one of the major risks to sustainability of agricultural soils in Iran. Tillage is the most critical operation in soil management designed to achieve high crop yield, but it can adversely affect the soil fauna in several ways. In the present study, assessment of soil fauna was carried out in Western Iran in 2008 and 2009 in soil subjected to conventional (CT), minimum (MT) and no (NT)-tillage systems and amended with three levels of cattle manure (CM). Earthworm, mite, springtail and nematode populations were measured as indicators of macro, meso and micro fauna groups, respectively. Soil moisture and bulk density were also determined. Generally, low populations of soil fauna were observed consistent with expectations under similar conditions for this region. Earthworm populations were low and had a patchy distribution. Tillage and CM were found to have no effects on soil mites in both years. Soil springtails were reduced by soil tillage, indicating their sensivity to soil disturbance induced by tillage. In 2008, the nematode population was greater with application of 40 ton ha^?1 CM applications (113 N.100 g soil^?1). Soil tillage-induced disturbance reduced nematode population in 2009 (214 N.100 g soil^?1 at CT). Minimum seedbed preparation besides less soil disturbance makes MT a proper tillage system for Zea mays cultivation. Cattle manure application increased Z. mays’ biomass, but according to our results its annual application is not recommended. There were no changes in BD in both years. We conclude that in short-term studies, soil nematode populations are suitable biological indices (under similar soil and climatic conditions) for the ecological comparison of agricultural management systems in Iran.     

A Comprehensive Numerical Study of Hydraulic Fracturing Process and Its Affecting Parameters

Production of hydrocarbons from shale formations has been made possible mainly due to hydraulic fracture (HF) technology. It increases the permeability of reservoir rocks around a well by connecting fractures and improving conductivity. HF behavior especially in presence of natural fractures have recently given much attention in studies. This paper investigates HF propagation and its associated parameters in various conditions. A higher order displacement discontinuity method is used to achieve higher accuracy in the results. First, behavior of crack opening displacement (COD) of an HF i.e. HF width in various conditions is studied. COD is a key parameter in determination of an HF operation success. It is proportional to production rate of oil and gas wells and provides a path for proppant entrance into the fractures. An equation considering many important parameters, based on numerous numerical modellings of various mechanical and geometrical effects on COD is proposed with coefficient of determination and standard error of 94.35% and 4.37 × 10^?4 respectively. The next part of the paper studies the HF propagation in a naturally fractured reservoir. These natural fractures alter the stress fields and hence affect the propagation of a hydraulic fracture. In fact, it is shown that in certain orientations of hydraulic fractures and natural fractures, the effect of natural fractures disappear or completely changes propagation path. Using a combination of several interaction criteria, a new modeling of HFs and NFs interaction is presented. The modellings showed that spacing and angle of intersection can significantly affect HFs propagation. The results of COD and HF propagation in presence of natural fractures may be considered in HG design and primary orientation of perforated fractures.     

Adsorption of BTEX on Surfactant Modified Granulated Natural Zeolite Nanoparticles: Parameters Optimizing by Applying Taguchi Experimental Design Method

In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents.     

Innovative mitigation method for buried pipelines crossing faults

A new remediation technique is proposed to mitigate large deformations imposed on buried pipeline systems subject to permanent ground deformation. With this technique, low-density gravel(LDG) with high porosity, such as pumice,is used as backfill in the trench containing the pipe near an area susceptible to PGD. This countermeasure decreases soil resistance, soil-pipe interaction forces and strain on the pipe as the pipeline deformation mechanism changes to a more desirable shape. Expanded polys...     

Relativistic Behavior and Equitemporal Surfaces in Ultra-Relativistic Prompt Emission Phase of Gamma-Ray Bursts

In this work we study a role of baryon load and interstellarmediumdensity to explain the nature of peaks in the ultra-relativistic prompt emission (UPE) phase of Gamma-ray Bursts (GRBs). We study the behavior of their Γ Lorenz factor fromthe moment of transparency all the way up to interstellarmedium. We finally study the characteristic of equitemporal surfaces in the UPE phase.     

Experimental study of bed topography variations due to placement of a triad series of vertical piers at different positions in a 180° bend

In this study, scouring around piers perpendicular to flow (PPF) and piers toward the flow (PTF) under clear-water condition was examined by placing a set of triad cylindrical piers with a 5-cm diameter and a 15-cm center to center distance at the positions of 60, 90, and 120° of the bend at a constant flow rate of 70 l per second. Natural sand of uniform grain size and average diameter of 1 mm with a uniformity coefficient of 1.3 was used as bed material of the flume. According to the results of this study, the maximum scouring depth occurred in the PPF test situated at the position of 90° of the bend. In such a position, the maximum depth of scouring hole was equal to 1.1 times the depth of the flow at the beginning of the bend. Also, where the piers were positioned in PTF and PPF modes in a 60° angle, the maximum area of scouring hole was observed around piers and sediment piles at the downstream side of the piers. The maximum height of sedimentation occurred in the PPF test situated at the 90° position of the bend. Such a stack was as high as 0.7 times the flow depth at the beginning of the bend and was observed at the 156° position of the bend, at a 20% distance of the flume width from the inner bank. Further results as well as discussion and analysis are among other points presented in the article.     

Utilization of waste coral for biodiesel production via transesterification of soybean oil

In the present study, the waste coral was utilized as a source of calcium oxide for transesterification of soybean oil into biodiesel (methyl esters). Characterization results revealed that the main component of the waste coral is calcium carbonate which transformed into calcium oxide when calcined above 700 °C. The Box–Behnken design of experiment was carried out, and the results were analyzed using response surface methodology. Calcination temperature, methanol– soybean oil molar ratio and catalyst concentration were chosen as variables. The methyl ester content (wt%) was response which must be maximized. A second-order model was obtained to predict methyl ester content as a function of these variables. Each variable was placed in the three low, medium and high levels (calcination temperature of 700, 800 and 900 °C; catalyst concentration of 3, 6 and 9 wt%; methanol-to-oil ratios of 12:1, 18:1 and 24:1). The optimum conditions from the experiment were found that the calcination temperature of 900 °C, catalyst concentration of 6 wt% and methanol-to-oil ratio of 12:1. Under these conditions, methyl ester content reached to 100 wt%. The waste catalyst was capable of being reused up to 4 times without much loss in the activity.     

Uncertainty of climate change impact on crop characteristics: a case study of Moghan plain in Iran

Theoretical and Applied Climatology - Crop yield is one of the most critical factors in the food security chain. Climate plays a crucial role in crop water productivity in rainfed and irrigated...