A DIAGNOSTIC ANALYSIS OF AIR TEMPERATURE ANOMALY MODE OVER CHINA IN 2009/2010 WINTER BASED ON GENERALIZED EQUILIBRIUM FEEDBACK ASSESSMENT (GEFA) METHOD

By using the observed monthly mean data over 160 stations of China and NCAR/NCEP reanalysis data, the generalized equilibrium feedback assessment(GEFA) method, combined with the methods of EOF analysis, correlation and composite analysis, is used to explore the influence of different SST modes on a wintertime air temperature pattern in which it is cold in the northeast and warm in the southwest in China. The results show that the 2009/2010 winter air temperature oscillation mode between the northern and southern part of China is closely related to the corresponding sea surface temperature anomalies(SSTA) and its associated atmospheric circulation anomalies. Exhibiting warming in Northeast China and cooling in Southwest China, the mode is significantly forced by the El Nio mode and the North Atlantic SSTA mode, which have three poles. Under the influence of SSTA modes, the surface northerly flow transported cold air to North and Northeast China, resulting in low temperatures in the regions. Meanwhile, the mid-latitude westerlies intensify and the polar cold air stays in high latitudes and cannot affect the Southwest China, resulting in the warming there.     

基于CORS数据反演江苏上空电离层电子密度

本文利用IRI2007模型和江苏CORS网数据,结合附加约束的同时迭代重构算法,反演了地磁平静日江苏上空电子密度的结构分布。结果表明,整个研究区域电子密度在不同纬度和不同高度上存在明显的日变特征,电子密度最大值出现在北京时13～15时,随着时间推移,峰值幅度衰减;白天出现明显的E层,夜晚消失;反演结果说明了电离层三维层析技术为监测电离层时空结构提供了一种强有力的实验支持。     

流空间邻近关系约束下的流行病分布空间异常探测方法

针对现有流行病空间异常探测方法在全面探测多因素导致的潜在空间异常方面的局限性,本文提出一种流空间邻近约束关系下的流行病分布空间异常探测方法.首先,基于地理探测器识别与传播中心人群流出强度因素具有显著关联关系的疫情专题属性;然后,基于流空间邻近关系度量自适应构建流空间权重矩阵;最后,构造疫情属性空间局部变化梯度变量刻画空...     

沉积物中硬质粘土层的研究进展

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。     

山东省蓬莱市蝎子顶金矿地质特征

蓬莱市蝎子顶金矿容矿构造为NW向断裂,具NW向成串分布的特点。NW向压扭性断裂与其派生的断裂裂隙系统是该区金矿床赋存空间的重要构造标志,构造破碎带中的钾化、硅化、黄铁绢英岩化等蚀变是一种直接找矿标志。通过对矿床地质特征的研究,认为该矿床属岩浆低中温热液充填交代蚀变岩型金矿床。     

岷县漳县6.6级地震前区域地壳运动变形背景与断层形变异常特征

利用甘肃岷县漳县6.6级地震区所在的青藏块体东北缘地区的区域水准、GPS、流动重力和跨断层短测线等地形变监测资料,结合地质构造、动力环境和已往的研究结果,分析了不同类型资料反映的震前区域性地壳变形背景、断层形变异常特征和可能的机理.结果认为：（1）岷县漳县6.6级地震前西秦岭、六盘山等构造区不同程度地存在着GPS水平挤压闭锁高应变积累、垂直隆升异常高梯度带和重力升、降差异剧烈变化等中长期背景;（2）震前到震时发震断裂附近及其外围相关构造区域断层形变异常在空间和时间上的起伏波动变化显著,尤其是汶川地震以来的波动变化在一定程度上反映了与本区构造比邻的龙门山断裂带剧烈右旋错动对本区的影响,与本次岷县6.6级地震过程有关;（3）本区有地形变监测资料积累以来缺乏6级以上震例,虽然存在不同程度的中长期形变背景异常,但何时进入短期-短临阶段确实很难把握,需要不断积累总结和探索提高.     

低周反复荷载下Q460钢材框架柱抗震性能分析

为了进一步完善Q460钢材在抗震设计规范中相关限值的要求,本文利用有限元软件ABAQUS,以轴压比、翼缘宽厚比、腹板高厚比和壁板宽厚比为变量,建立了共48根“工”字型框架柱和“箱”型框架柱,分析了其抗震性能。结果表明:翼缘宽厚比对框架柱的能量耗散系数影响较小;能量耗散系数随轴压比、腹板高厚比（“工”字型）和壁板宽厚比（“箱”型）增大而明显减小;框架柱的极限承载力随轴压比的减小及壁板宽厚比和翼缘宽厚比的增大而逐渐增大,当腹板高厚比接近规范限值时,承载力下降趋势明显增大。与采用Q235钢材的框架柱相比,Q460钢材框架柱的延性较小,仅为2左右;当采用Q460钢材时,“工”字型框架柱的极限位移角限值建议取为0.03,“箱”型框架柱的极限位移角限值建议取为0.032。规范中对翼缘宽厚比限值的规定偏于保守,其值最大可取至9。无论是“工”字型框架柱还是“箱”型框架柱,其腹板高厚比均不宜过大。Q460钢材框架柱的刚度退化率随轴压比的增大而增强,且翼缘宽厚比越大,腹板高厚比越小,柱的初始刚度越大,刚度退化程度越明显。     

热力强迫对台风次级环流的作用

本文利用无量纲的台风次级环流方程,用西太平洋地区11年的综合台风资料,计算了热力因子强迫的次级环流。通过计算,得到主要结论如下: 1.非绝热加热和积云热量垂直混合是主要的热力强迫因子,二者的作用具有同样量级。 2.热量的湍流涡旋通量及积云的热量水平输送作用都比较小。 3.Ekman抽吸与积云热量垂直混合是相互促进,共同发展的。有利于次级环流的增强。     

Effect of the Coefficient on the Performance of A Two-Layer Boussinesq-Type Model

The coefficients embodied in a Boussinesq-type model are very important since they are determined to optimize the linear and nonlinear properties.In most conventional Boussinesq-type models,these coefficients are assigned the specific values.As for the multi-layer Boussinesq-type models with the inclusion of the vertical velocity,however,the effect of the different values of these coefficients on linear and nonlinear performances has never been investigated yet.The present study focuses on a two-layer Boussinesq-type model with the highest spatial derivatives being 2 and theoretically and numerically examines the effect of the coefficient on model performance.Theoretical analysis show that different values for(0.13≤α≤0.25)do not have great effects on the high accuracy of the linear shoaling,linear phase celerity and even third-order nonlinearity for water depth range of 0相似文献   

Methods and procedures to determine the outer limits of the continental shelf beyond 200 nautical miles

This paper establishes techniques and methods to determine a variety of boundaries associated with 200 nautical miles beyond the continental shelf. The methods, based on topography, slope and second-deriv- ative profile integrated analysis, are now able to identify automatically the foot of the continental slope （FOS）. By analyzing the sedimentary profile, the points of 1% sediment thickness are recognized. Through the intersection, cut, deletion and mergence calculation of the extrapolated data set of fLxed-point series, the method succeeds in generating automatically the extrapolated boundaries, including the FOS＋60 M line, the 350 M line, and the 2500 m＋100 M line. In addition, based on the automatic analysis of the topographic profile, it can be applied to determine rapidly the points of maximum water depth. Taking the northern Okinawa Trough （OT） as an example, these methods are used to calculate and examine the boundaries in- cluded in the Submission by the People＇s Republic of China Concerning the Outer Limits of the Continental Shelf beyond 200 Nautical miles in Part of the East China Sea （ECS）; the boundaries thus derived have a solid scientific and rational basis.