Distribution of the C37 tetra-unsaturated alkenone in Lake Qinghai, China: A potential lake salinity indicator

The alkenone unsaturation index U^K′₃₇ has been applied to reconstruct past temperature changes in both marine and lacustrine systems. However, few studies have addressed whether the relative abundance of the C_37:4 alkenone to the total C₃₇ production (%C_37:4) can reflect surface salinity changes in lacustrine systems. Here we present long-chain C₃₇ alkenone distribution patterns in surface sediments from Lake Qinghai, China. Surface sediments were sampled over a large range of surface salinity changes (1.7-25 g/l) within Lake Qinghai and its surrounding lakes, while temperature differences at these sampling locations should be relatively small. We have found that %C_37:4 varies from 15% to 49% as surface salinity decreases. We tentatively describe this %C_37:4-salinity link with a general linear regression: %C_37:4 = 53.4 (±7.8) − 1.73 (±0.45) × S (n = 28, r² = 0.62), although step-wise %C_37:4 changes in response to salinity variation may exist. U^K′₃₇ values vary between 0.10 and 0.16 at these sites and the inferred range of lake water temperature changes is ∼2-3 °C, suggesting that U^K′₃₇ largely reflects temperature signal across a large salinity range, consistent with previous findings that U^K′₃₇ can indicate temperature changes over a large diversity of environmental settings. We have also found that U^K′₃₇ values are correlated with salinity changes (r² = 0.4), and thus cannot exclude potential temperature effect on %C_37:4 and salinity effect on U^K′₃₇ in this study. However, even extreme estimates of temperature differences within the lake are still unable to explain the observed %C_37:4 changes. We therefore suggest that %C_37:4 could be used to infer past lake salinity changes at a regional scale.     

Exurbia from the bottom-up: Confronting empirical challenges to characterizing a complex system

We describe empirical results from a multi-disciplinary project that support modeling complex processes of land-use and land-cover change in exurban parts of Southeastern Michigan. Based on two different conceptual models, one describing the evolution of urban form as a consequence of residential preferences and the other describing land-cover changes in an exurban township as a consequence of residential preferences, local policies, and a diversity of development types, we describe a variety of empirical data collected to support the mechanisms that we encoded in computational agent-based models. We used multiple methods, including social surveys, remote sensing, and statistical analysis of spatial data, to collect data that could be used to validate the structure of our models, calibrate their specific parameters, and evaluate their output. The data were used to investigate this system in the context of several themes from complexity science, including have (a) macro-level patterns; (b) autonomous decision making entities (i.e., agents); (c) heterogeneity among those entities; (d) social and spatial interactions that operate across multiple scales and (e) nonlinear feedback mechanisms. The results point to the importance of collecting data on agents and their interactions when producing agent-based models, the general validity of our conceptual models, and some changes that we needed to make to these models following data analysis. The calibrated models have been and are being used to evaluate landscape dynamics and the effects of various policy interventions on urban land-cover patterns.     

储量计算与勘探线剖面计算机辅助成图一体化

引入关系教据库和GIS自动编图技术,改进传统的垂直断面法储量计算过程,可实现矿山储量计算和勘探线剖面计算机辅助成图的同步和一体化.在共用的矿山地矿信息点源数据库平台基础上.通过设置本地数据库,形成GIS操作时的外挂属性库,用来保存储量计算和机助成图过程中的动态数据.储量计算中的每一步骤中,用户以GIS为操作界面来同步实现对空间图元和外挂属性的操作,这其中对工程样段组合、矿体边界圈连和剖面制图综合等开发了大量自动化辅助功能.储量计算的各步完成后,勘探线剖面图和储量报表即同步生成.这种改进的工作方式实现了垂直断面法全过程的计算机辅助化,将提高这一传统方法的应用效率.     

跨孔电阻率法有限元数值模拟及反演

油气资源和矿产资源勘探中,常需要较大的勘探深度和较高的深部分辨能力.充分利用现有钻孔的井地或跨孔电阻率成像技术适应这种要求,但引起的视电阻率响应复杂,从而给资料的正确处理与解释带来一定的困难,为此有必要通过正演数值模拟和反演相结合的手段,对理论模型井地或跨孔装置的响应异常规律进行研究.文章通过设计一个典型地质模型,利用Ansys有限元软件对模型进行2D跨孔电阻率法有限元正演计算,并将模拟的响应视电阻率作为反演的输入,结合平滑约束最小二乘反演,分析了异常特征和分布规律.     

利用MC-ICPMS对水样中硼同位素比值的测定

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).     

邹平王家庄铜矿床成矿地球化学及成因探讨

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。     

碳酸盐岩裂缝与岩溶作用研究

从构造与非构造作用角度出发,突出研究断层对裂缝的控制作用、断裂与岩溶的关系和裂缝与岩溶之间的关系,揭示碳酸盐岩裂缝与岩溶的发育规律。研究表明：构造裂缝为岩溶发育提供岩溶作用进行的有利通道,非构造裂缝则可以加速溶蚀作用的进行,促进岩溶的发育;裂缝与岩溶之间的关系始终是相辅相成、相互促进的关系。     

河南省栾川县罗村钼矿成矿特征及找矿

通过对河南省栾川县罗村钼矿区域地质背景、矿床地质特征与南泥湖、三道庄及东沟超大型钼矿的综合对比、分析、研究,总结归纳了矿区NWW构造形迹、小岩体与钼矿成矿关系、围岩对成矿的控制作用、围岩蚀变与成矿的关系、地球化学异常与钼矿床的关系等成矿特征.根据罗村钼矿的成矿特征,初步指出今后的找矿方向.     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.