A constitutive model for mechanical and chemo‐mechanical compaction in sedimentary basins and finite element analysis

Compaction and associated fluid flow are fundamental processes in sedimentary basin deformation. Purely mechanical compaction originates mainly from pore fluid expulsion and rearrangement of solid particles during burial, while chemo‐mechanical compaction results from Intergranular Pressure‐Solution (IPS) and represents a major mechanism of deformation in sedimentary basins during diagenesis. The aim of the present contribution is to provide a comprehensive 3D framework for constitutive and numerical modeling of purely mechanical and chemo‐mechanical compaction in sedimentary basins. Extending the concepts that have been previously proposed for the modeling of purely mechanical compaction in finite poroplasticity, deformation by IPS is addressed herein by means of additional viscoplastic terms in the state equations of the porous material. The finite element model integrates the poroplastic and poroviscoplastic components of deformation at large strains. The corresponding implementation allows for numerical simulation of sediments accretion/erosion periods by progressive activation/deactivation of the gravity forces within a fictitious closed material system. Validation of the numerical approach is assessed by means of comparison with closed‐form solutions derived in the context of a simplified compaction model. The last part of the paper presents the results of numerical basin simulation performed in one dimensional setting, demonstrating the ability of the modeling to capture the main features in elastoplastic and viscoplastic compaction. Copyright © 2016 John Wiley & Sons, Ltd.     

High-resolution spectroscopy of gamma-ray bursts

We report on results from the Goddard germanium Gamma-Ray Burst Spectrometer flown on the ISEE-3 spacecraft. Spectral and temporal studies of two events on 4 and 19 November, 1978 are presented. The power law spectral indices were found to be respectively –1.82 and –1.31, the latter being the hardest event thus far detected. Evidence for two lines in the 4 November event is presented — a broad feature at 420 keV and a narrower one at 740 keV. These are consistent with a common redshift if the parent lines are assumed to be the positron annihilation line (511 keV) and the first excited state of iron (847 keV). If this interpretation is correct, it is shown that additional lines from higher levels of iron and possibly other nuclei are expected and that they may represent a significant contribution to the total spectrum above 1 MeV.Paper presented at the Symposium on Cosmic-Ray Bursts, held at Toulouse, France, 26–29 November, 1979.     

Geochemistry and geochronology of proterozoic tholeiite dykes of east antarctica: evidence for mantle metasomatism

Two episodes of tholeiite dyke emplacement have been identified in Archaean high-grade metamorphics of the Napier Complex in Enderby Land. Middle Proterozoic Amundsen dykes are typical continental tholeiites and most of the chemical variation in individual suites can be explained in terms of different degrees of partial melting and low-pressure crystal fractionation. Group I Amundsen tholeiites were derived from a relatively homogeneous source region 1,190±200 m.y. ago, whereas that of the group II Amundsen tholeiites was chemically and isotopically heterogeneous. Group II dykes have various degrees of enrichment in incompatible elements, and commonly show normalised trace element abundance patterns with negative Nb anomalies. These features imply variable metasomatism of the source region by a volatile-rich fluid phase (rather than a melt of any observed igneous composition) enriched in K, Rb, Ba, Th, and possibly La and Ce.Early Proterozoic (2,350±48 m.y.) tholeiites were emplaced at considerable depths in the crust during the waning stages of granulite-facies metamorphism and include a high-Mg suite of possible komatiitic affinity, ranging in composition from hypersthene-rich tholeiite (norite) to quartz-rich tholeiite. They tend to have higher ratios of highly to moderately incompatible elements (e.g., K/Zr, K/Ce), and larger Nb anomalies (i.e., higher K/Nb) compared with middle Proterozoic tholeiites, suggesting derivation from more enriched source regions. Isotopic data are not compatible with significant crustal contamination, but constrain source metasomatism to a time immediately before emplacement. Metasomatism of the source region of the much younger group I tholeiites may have been contemporaneous with that of the high-Mg suite.     

Use of remote sensing in lineament analysis for tectonic evolution and resource study of a part of Vindhyan Basin,Jhalawar area,India

Synoptivity and the exemplified fracture systems exhibited by the space borne imagery data has helped in solving many of the geological enigma in various parts of the world. The study conducted, using such remotly sensed data, in Jhalawar anticline, part of Proterozoic Cratonic Vindhyan Basin, Rajasthan, India, led to infer the history of tectonic evolution of peribasinal deformation which has been a matter of controversy for a century and more. In Landsat MSS data the Jhalawar region displays a panorama of lineaments and their analysis through azimuthal frequency diagrams, isofracture, lineament incidence and lineament intersection incidence density maps shows that the mean orientation of the lineaments fall in NW-SE and NE-SW and the shape of the various lineament density contours also show NE-SW and NW-SE orientations. In aerial photographs the area exhibits four sets of lineaments in NE-SW, NW-SE, N-S and E-W directions. Amongst these the former two sets are expressed as wide open master fracture systems with prolific vegetation fills along them and the latter two sets are characteristically observed as thin vegetation linears with frequent strike slip faulting along them. The further analysis of these fracture/lineament systems derived from multi-level remote sensing data shows that the Jhalawar anticline, which followed the pattern of flexural slip fold mechanism, was evolved by horizontally disposed σ1 (greatest principal stress) and 3σ (least principal stress) with the former oriented in NE-SW and the latter aligned in NW-SE directions with vertically disposed 2σ. The inference of such palaeostress environment of the Jhalawar region lead in the identification of a buried rigid basement high southwest of Jhalawar anticline, beneath the Deccan pile and loci of ground water, silica sand and probable igneous plug.     

The birthplaces of active regions and X-ray bright points

A comparison of soft X-ray pictures of the Sun (S-054 experiment of Skylab) with K-line spectroheliograms (Mount Wilson) shows that the X-ray bright points tend to emerge randomly throughout the Ca network pattern. However, all those bright points that developed into active regions emerged at the boundaries of network cells. This suggests that the magnetic flux of active regions comes from greater depths in the convection zone than the shallow flux that gives rise to the random emergence of bright points.Also Physics Department, C-011, University of California at San Diego, La Jolla, Calif., U.S.A.     

Measuring proton energies and fluxes using EIT (SOHO) CCD areas outside the solar disk images

An indirect proton flux measuring tool based on discrimination of the energy deposited by protons in 128 × 128 pixel EIT CCD areas outside the solar disk images is presented. Single pixel intensity events are converted into proton incident energy flux using modeled energy deposition curves for angles of incidence ±60° in four EIT spatial areas with different proton stopping power. The extracted proton flux is corrected for both the loss of one‐pixel events in the range of angles of incidence as well as for the contribution to the single pixel events resulting from scattered middle‐energy protons (low‐energy or high‐energy particles are stopped by the EIT components or pass through them, accordingly). A simple geometrical approach was found and applied to correct for a non‐unique relation between the proton‐associated CCD output signal and the incident proton energy. With this geometrical approximation four unique proton incident energy ranges were determined as 45–49, 145–154, 297–335, and 390–440 MeV. The indirect proton flux measuring tool has been tested by comparing Solar Energetic Particles (SEP) flux temporal profiles extracted from the EIT CCD frames and downloaded from the GOES database for the Bastille Day (BD) of 2000 July 14 and the more recent 2005 January 20 events. The SEP flux temporal profiles and proton spectra extracted from the EIT in the relatively narrow energy ranges between 45 and 440 MeV reported here are consistent with the related GOES profiles. The four additional EIT extracted ranges provide higher energy resolution of the SEP data. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Removal of Selenium by Adsorption onto Granular Activated Carbon (GAC) and Powdered Activated Carbon (PAC)

The present work involves the study of Se(IV) adsorption onto granular activated carbon (GAC) and powdered activated carbon (PAC). The adsorbents are coated with ferric chloride solution for the effective removal of selenium. The physico-chemical characterization of the adsorbents is carried out using standard methods, e. g., proximate analysis, scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), thermo-gravimetric (TGA) and differential thermal analysis (DTA), etc. The FTIR spectra of the GAC and PAC indicate the presence of various types of functional groups, e. g., free and hydrogen bonded OH groups, silanol groups (Si-OH), alkenes, and CO group stretching from aldehydes and ketones on the surface of adsorbents. Batch experiments are carried out to determine the effect of various factors such as adsorbent dose (w), initial pH, contact time (t), and temperature (T) on the adsorption process. The optimum GAC and PAC dosage is found to be 10 g/L and 8 g/L, respectively, for Se(IV) removal with C₀ = 100 mg/L. The percent removal of Se(IV) increases with increasing adsorbent concentration, while removal per unit weight of adsorbent increases with decreasing adsorbent concentration. Se(IV) adsorption onto both the GAC and PAC adsorbents is high at low pH values, and decreases with increased initial pH. The results obtained are analyzed by various kinetic models. The parameters of pseudo-first order, pseudo-second order kinetics, and Weber-Morris intra particle kinetics are determined. It is seen that the sorption kinetics of Se(IV) onto GAC and PAC can be best represented by the pseudo-second order kinetic model.     

Carbonaceous matter in sulfide-quartz veins at the Kurultyken base-metal deposit,eastern Transbaikal region,Russia

The carbonaceous matter filling cavities in sulfide-quartz veins at the Kurultyken hydrothermal base-metal deposit in the Khapcheranga ore district, Transbaikal region, was studied using chromatography/mass spectrometry, X-ray diffraction, thermal and isotopic analyses, and IR spectroscopy. It was established that carbonaceous matter was a maltha composed of polycyclic aromatic hydrocarbons (PAHs). Chrysene, pyrene, and benzpyrelene identified among PAHs are evidence for the hydrothermal origin of the initial carbonaceous matter of maltha. The main mass of carbonaceous matter was synthesized under reductive conditions and at a low temperature, i.e., at the final stage of base-metal ore formation. Nevertheless, the thermometric data indicate that part of the carbonic compounds could have formed at 480°C, i.e., at the high-temperature stage of the postmagmatic process. The contribution of host rocks as a source of carbonaceous matter was minimal.