Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.     

A Review of Catalogues of Chinese Earthquakes

In the past decade, the most authoritative catalogues of Chinese earthquakes and the most popular with seismologists in China are the following:(1) Gu Gongxu, 1983, Catalogue of Chinese Earthquakes;(2) Min Ziqun, 1988, Concise Catalogue of Chinese Earthquakes;(3) Xie Yusuou, 1989, Catalogue of Chinese Earthquakes (M≥ 4.7) from 1900-1980 with Uniform Magnitudes; and(4) Min Ziqun, 1995, Catalogue of Chinese Historical Strong Earthquakes. Earthquakes that occurred before 1900 are mainly documented in historical records.Since 1950s, more recent earthquakes were documented in two major compilations of historical records finished in 1956 and 1983-1987. Separately this effort resulted in two chronicles: two volumes for the first one and five volumes for the second one. The magnitudes are converted from the maximum intensity. These magnitudes, by convention, are connected with surface wave magnitudes. However, it is clear that they do not have any strict seismological definition.The period of 1900-1962 documen     

Geochemical surveillance of active volcanoes: data on the fumaroles of Vulcano (Aeolian Islands,Italy)

Temperature and chemical composition of condensates of higher temperature fumaroles, located on the rim of the crater of Vulcano, were studied over a period of one year. Maximum temperature changed from 216°C (June 1977) to 291°C (May 1978). HCl is the main constituent of condensates which, in comparison with data from fumaroles of other volcanoes, contain also noteworthy quantities of boron and bromine. Since these chemical characteristics suggested the possible inflow of water of marine origin into the volcanic conduit, experimental data on seawater-rock reactions at high temperatures and pressures were taken into account. A model is drafted for the volcanic system, in which the occurrence of an aquifer interposed between the magma chamber and the surface is considered. The vaporization of this aquifer would feed the fumaroles giving rise, through different mixing processes with surface waters, to the observed differences in temperature and chemical composition. However, data available at present are not sufficient to support the proposed model, which must be mainly considered as a working hypothesis.     

Distribution, source and evolution of nitrate in a glacial till of southern Alberta, Canada

This paper addresses the distribution, origin and controls upon nitrate in a 30-km² area of the Interior Great Plains Region of southern Alberta, Canada. High concentrations of nitrate (> 100 mg l⁻¹ NO⁻₃-N) occurred in several isolated enclaves below the water table in brown weathered till. Nitrate concentrations of over 300 mg l⁻¹-N were encountered in groundwater samples collected from these enclaves. Low nitrate concentrations (< 1.1 mg l⁻¹ NO⁻₃-N) were also encountered in the weathered till upgradient and downgradient of the nitrate enclaves. Groundwater samples collected from the underlying grey nonweathered till and bedrock had NO⁻₃-N concentrations of < 1.1 mg l⁻¹.

Through the application of geochemical (NO⁻₃-N and NH⁺₄-N) studies, environmental isotope studies (tritium), microbial analyses (nitrifiers) and laboratory experiments, it was shown that the high nitrates found in the weathered till are the result of the oxidation of ammonium present within the tills. It is postulated that this oxidation occurred during the Holocene epoch when water tables were much lower than present-day levels (5–18 m, and 2 m below ground, respectively).

Through the use of Eh measurements, the enumeration of denitrifying bacteria and laboratory experiments, the potential for denitrification was shown to exist below the present-day water table in the weathered till as well as in the nonweathered till and bedrock. Isotopic data showed that less denitrification may be occurring within the nitrate enclaves than in adjacent downgradient areas.     

Application of statistical methods for predicting uniaxial compressive strength of limestone rocks using nondestructive tests

Uniaxial compressive strength (UCS) of an intact rock is an important geotechnical parameter for engineering applications. Using standard laboratory tests to determine UCS is a difficult, expensive and time-consuming task. The main purpose of this study is to develop a general model for predicting UCS of limestone samples and to investigate the relationships among UCS, Schmidt hammer rebound and P-wave velocity (V _P). For this reason, some samples of limestone rocks were collected from the southwestern Iran. In order to evaluate a correlation, the measured and predicted values were examined utilizing simple and multivariate regression techniques. In order to check the performance of the proposed equation, coefficient of determination (R ²), root-mean-square error, mean absolute percentage error, variance accounts for (VAF %), Akaike Information Criterion and performance index were determined. The results showed that the proposed equation by multivariate regression could be applied effectively to predict UCS from its combinations, i.e., ultrasonic pulse velocity and Schmidt hammer hardness. The results also showed that considering high prediction performance of the models developed, they can be used to perform preliminary stages of rock engineering assessments. It was evident that such prediction studies not only provide some practical tools but also contribute to better understanding of the main controlling index parameters of UCS of rocks.     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

Diatom assemblages from Costa Rican lakes: an initial ecological assessment

We compared the distributions of 59 diatom species in surface sediments of 25 Costa Rican lakes with 21 environmental variables using canonical correspondence analysis (CCA). The distribution of taxa was related to the chemical and physical characteristics of the lakes. The most influential chemical variables were cation concentrations (especially magnesium) and related variables such as water hardness, pH, and temperature. Lake area and lake depth were among the most important physical variables.A number of taxa were identified as potential environmental indicators. The diatoms Brachysira serians var. brachysira and Frustulia rhomboides seem to be associated with low values of alkalinity, hardness, Ca, Mg, and SiO2. Cymbella minuta var. silesiaca is associated with low to moderate values of alkalinity, hardness, Ca, and Mg. Nitzschia cf. amphibia may be an indicator of moderate-to-high concentrations of Mg. Pinnularia braunii var. amphicephala seems to prefer low values of hardness, Ca, Mg, and SiO2.In many closed lakes, these environmental variables (Mg/Ca/hardness/alkalinity) increase with effective evaporation. Consequently, these diatoms may be indirectly tracking P:E ratios. Results from this initial, small data set indicate the potential of diatoms for inferring lake paleochemistry, and perhaps P:E ratios, in Costa Rica.     

Stratigraphic record of thrust propagation, Carboniferous foreland basin, Pyrenees, with emphasis on Pays-de-Sault (France/Spain)

The Carboniferous culm of the Pays-de-Sault is divided into two diachronous and synshortening series. These series are dated Late Visean (Pic d'Ourtiset series in a northern overthrust unit) and Early Namurian E2 (La Fajolle series in a southern underthrust unit) from an association of foraminifers, algae, and microproblematica identified in clasts of conglomerates. According to structural positions and facies criteria, these two series are interpreted as two turbiditic depocenters which were generated by southward thrust propagation during Late Visean and Early Namurian. At the scale of the Pyrenean Hercynian range, this evolution is consistent with a thrust and depocenter sequence propagating on the wedge-top depozone of a foreland basin system from the northeast (Mouthoumet subpyrenean massif) to the southwest (end of the High Primary Range) during Late Visean to Westphalian C time interval.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.