Ammonium regeneration in intertidal sediments of the Yangtze estuary during air-exposure

The influences of exposure to the atmosphere on ammonium cycle in the intertidal surface sediments were in situ studied with a geochemical approach at a typical station in the Yangtze Estuary during three tidal cycles in September 2003. During an about 8-h emersion period of each diurnal tide, six high-resolution vertical profiles of adsorbed and dissolved ammonium were measured. It was observed that both adsorbed and dissolved ammonium generally had an increasing trend in sediment cores during the exposure. The rate of ammonium regeneration in sediments was estimated using the accumulation amount of ammonium including adsorbed and soluble fractions during the daytime emersion. The calculation result showed that there was relatively high ammonification rate (˜500 nmol N cm⁻³ day⁻¹), which reflected that organic nitrogen in sediments was quickly decomposed with a residence time of ˜52.7 days. Due to the dramatic temperature difference observed in sediment profiles, free convection was considered an important mechanism of regulating the efflux of produced ammonium into overlying waters. The total estimated amount of regenerated ammonium was ˜1.35×10⁵ t N year⁻¹ in the intertidal flat of the Yangtze Estuary, which occupied 7.6% of the total inorganic nitrogen annually transported to the estuarine ecosystem.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

MODIS数据在广西生态环境监测及评价中的应用方法

利用MODIS数据广西遥感影像,用监督分类法做出了地物覆盖分类图,用主成分分析法做出了土壤侵蚀强度图和生态环境质量综合评价指数图。     

电子地图中多尺度地图数据显示的研究

将计算机三维模型简化中的LOD思想引入到电子地图的组织和显示中,提出了同一比例尺数字地图不同详细程度的分层显示方法和不同比例尺数字地图嵌套显示方法,实现了电子地图的多级缩放。     

多时相组合分类法在土地利用动态监测中的应用

介绍了土地利用遥感动态监测的基本概念，简述了遥感土地利用变化信息提取等遥感监测方法．重点探讨了多时相组合分类方法的相关技术。对广西2002年和2003年两个时相的MODIS数据．采用多时相直接分类法对土地利用变化状况进行了遥感动态监测。对不同方式波段组合的试验表明。经过差值、比值处理的波段组合具有较差的试验效果(总体精度只有30％～40％)，而经过PCA变换的波段组合则具有相对较好的试验效果(总体精度超过70％)。     

青藏高原东缘龙门山晚新生代剥蚀厚度与弹性挠曲模拟

龙门山是青藏高原东缘边界山脉,具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元。利用数字高程模式图像和裂变径迹年代测定方法研究和计算龙门山晚新生代剥蚀厚度与剥蚀速率,结果表明:3.6 Ma以来龙门山的剥蚀厚度介于1.91-2.16 km之间,剥蚀速率介于0.53-0.60 mm/a之间。在此基础上,开展了该地区岩石圈的弹性挠曲模拟,结果表明龙门山的隆升机制具有以构造缩短隆升和剥蚀卸载隆升相叠合的特点。3.6 Ma之前,龙门山的隆升与逆冲推覆构造负载有关,以构造缩短驱动的构造隆升为特色;3.6 Ma之后,龙门山的隆升与剥蚀卸载驱动的抬升有关,并以剥蚀卸载隆升为特色,进而提出了龙门山晚新生代以来的隆升机制以剥蚀成山作用为主的认识。     

H-90B微机γ能谱比活度测量仪

本介绍了H-90B微机γ能谱比活度测量仪的研制方案、仪器组成特点及主要技术指标；简述了仪器的工作原理，工作条件及测量方法；最后，介绍了其在现场检测建筑材料放射性比活度方面的应用情况。     

GPS RTK技术及其在管线勘控中的应用

针对GPS RTK技术应用中的工作条件、数据链传输、误差特性及质量控制等问题,结合管线勘控测量的作业特点,提出了提高RTK作业精度若干方法.     

Characterization and quantification of data voids in the shuttle Radar topography mission data

The goal of this study was to characterize and quantify the occurrence of data voids in data from the Shuttle Radar Topography Mission (SRTM) for the conterminous United States. For this purpose, SRTM data and corresponding data from the national elevation data were downloaded in 21 samples spatially organized to cover the main topography of the U.S. Void locations in SRTM data were compared to terrain attributes and subsequently the area of individual data voids to the same attributes. It was found that data voids amounted to 0.3% of the total dataset. Data voids were found in all topographic settings but more often in slopes steeper than approximately 20/spl deg/ that face south (170/spl deg/), and also in flat areas such as lakes and rivers. It was also found that more than 50% of all data voids were composed of connected pixels in groups less than six pixels. The largest data voids could be attributed to water bodies, while the rest could be explained by terrain-radar interaction characteristics.     

The negative alpha filter: a new Processing technique for polarimetric SAR interferometry

In this letter we develop a new concept, the negative alpha filter, which we suggest has application for quantitative estimation of surface parameters beneath vegetation using polarimetric synthetic aperture radar (SAR) interferometry (POLInSAR). We first derive the filter and then validate it using simulations of L-band coherent forest scattering. We then show initial results of applying the filter to airborne data from the German Aerospace Center's E-SAR L-band sensor.