RADON DEPTH MIGRATION1

A depth migration method is presented that uses Radon-transformed common-source seismograms as input. It is shown that the Radon depth migration method can be extended to spatially varying velocity depth models by using asymptotic ray theory (ART) to construct wavefield continuation operators. These operators downward continue an incident receiver-array plane wave and an assumed point-source wavefield into the subsurface. The migration velocity model is constrained to have longer characteristic wavelengths than the dominant source wavelength such that the ART approximations for the continuation operators are valid. This method is used successfully to migrate two synthetic data examples:

• 1 a point diffractor, and
• 2 a dipping layer and syncline interface model.

It is shown that the Radon migration method has a computational advantage over the standard Kirchhoff migration method in that fewer rays are computed in a main memory implementation.     

Isotope and trace element evidence for three component mixing in the genesis of the North Luzon arc lavas (Philippines)

Post-3Ma volcanics from the N Luzon arc exhibit systematic variations in ⁸⁷Sr/⁸⁶Sr (0.70327–0.70610), ¹⁴³Nd/¹⁴⁴Nd (0.51302–0.51229) and ²⁰⁸Pb^*/²⁰⁶Pb^* (0.981–1.035) along the arc over a distance of about 500 km. Sediments from the South China Sea west of the Manila Trench also exhibit striking latitudinal variations in radiogenic isotope ratios, and much of the isotopic range in the volcanics is attributed to variations in the sediment added to the mantle wedge during subduction. However, Pb-Pb isotope plots reveal that prior to subduction, the mantle end-member had high 8/4, and to a lesser extent high 7/4, similar to that in MORB from the Indian Ocean and the Philippine Sea Plate. Th isotope data on selected Holocene lavas indicate a source with unusually high Th/U ratios (4.5–5.5). Combined trace element and isotope data require that three end-members were implicated in the genesis of the N Luzon lavas: (1) a mantle wedge end-member with a Dupal-type Pb isotope signature, (2) a high LIL/HFS subduction component interpreted to be a slab-derived hydrous fluid, and (3) an isotopically enriched end-member which reflects bulk addition (<5%) of subducted S China Sea terrigenous sediment. The ⁸⁷Sr/⁸⁶Sr ratios in the volcanics show a restricted range compared with that in the sediments, and this contrasts with ¹⁴³Nd/¹⁴⁴Nd and ²⁰⁸Pb^*/²⁰⁶Pb^*, both of which have similar ranges in the volcanics and sediments. Such differences imply that whereas the isotope ratios of Nd, Pb and Th are dominated by the component from subducted sediment, those of Sr reflect a larger relative contribution from the slab-derived fluid.     

Fractional crystallization and zoning in igneous feldspars: ideal water-buffered liquid fractionation lines and feldspar zoning paths

Diagrams giving plagioclase and sanidine fractionation paths and liquid fractionation lines under conditions of ideal water-buffered fractional crystallization in the ternary feldspar system were constructed graphically using topological reasoning, and experimental data and calculated phase relationships from the literature. The liquidus lines and solidus or solvus paths are unique at constant P and a _{H 2}O. The composition of a liquid evolves with time and moves along a fractionation line by removal of successive crystal fractions, whereas the compositions of each of the crystal fractions lie on and define a solidus or solvus path. Most but not all such water-buffered lines and paths differ only slightly from those in which water is free to build up during crystallization and a _{H 2}O to increase, as in many rocks. Liquid compositions lying along liquidus fractionation lines are not normally preserved, unless erupted as aphyric lavas. The solidus or solvus paths may be preserved either as overgrowth zones in crystals (zoning paths) or as a series of crystal fractions in layered intrusions. The topologies of the lines and paths depend mainly on the nature of the two-feldspar boundary line separating the plagioclase and sanidine fields which is a function of P _{H 2}O or a _{H 2}O at constant P; increases in either progressively lower the liquidi and solidi and cause larger intersections of the solidi with the solvus. One-feldspar solidus paths at high P and a _{H 2}O are simple, whereas they are complex and may bend back on themselves at low P _{H 2}O or low a _{H 2}O at high P. Two-feldspar paths may be simultaneous (cotectic) or sequential (peritectic). The former are simple and do not meet at high P and a _{H 2}O, the critical solution line lying in the gap; they are complex and may bend back or overlap at low P _{H 2}O or low a _{H 2}O at high P, the position of the critical solution line being hard to determine. Liquids which have simultaneously fractionated two feldspars may fractionate only one towards the end, crystallization changing from subsolvus to hypersolvus. Sequential paths may involve overgrowth of an early feldspar by a later one, usually sanidine overgrowths on plagioclase, but plagioclase overgrowths on sanidine occur. These complexities explain in part the difficulties of unravelling the textural and compositional relationships of ternary feldspars in water-poor felsic igneous rocks (even in the absence of alteration or complex magma dynamics) and of trying to deduce phase relationships from natural occurrences of feldspars.C.R.P.G. contribution number 948     

Cesstibtantite—a geologic introduction to the inverse pyrochlores

Summary The crystal structure of cesstibtantite has been solved from diffractometer data collected on samples from Leshaia, Russia and the Tanco pegmatite, Manitoba. Cesstibtantite from the Leshaia pegmatite (type locality) hasa 10.515(2) Å, space groupFd3m, composition Cs_0.31(Sb_0.57Na_0.31Pb_0.02Bi_0.01)_O.91(Ta_1.88Nb_0.12)₂(O_5.69[OH, F]_0.31)₆(OH, F)_0.69, Z 8; its structure was refined toR 3.8,wR 4.3% using 96 observed (F > 3[F]) reflections (MoK). Cesstibtantite from the Tanco pegmatite hasa 10.496(1) Å, space groupFd3m, composition (Cs_0.22K_0.01)_0.23(Na_0.45Sb_0.39Pb_0.14· Ca_0.06Bi_0.02)_1.06(Ta_1.95Nb_0.05)₂(O_5.78[OH,F]_0.22)₆(OH,F)_0.55,Z 8; its structure was refined toR 3.9w R 3.7% using 104 observed reflections. Cesstibtantite differs from the normal pyrochlores in that it contains significant amounts of very large cations such as Cs. As these cations are too large (^VIII[r] > 1.60 Å) for the conventional [8]-coordinated A site, they occupy the [18]-coordinated site, which normally contains monovalent anions. Natural cesstibtantite samples are non-ideal in that both Cs and monovalent anions occur at the site; thus cesstibtantite is intermediate to thenormal pyrochlores (with only monovalent anions at the site) and theinverse pyrochlores (with only large cations at the site).

---

Cesstibtantit—eine geologische Einfiihrung in die inversen Pyrochlore

Zusammenfassung Die Kristallstruktur von Cesstibtantit wurde auf der Basis von Diffraktometerdaten von Proben von Leshaia, Russland and dem Tanco Pegmatit, Manitoba, gelöst. Cesstibtantit aus dem Leshaia Pegmatit (Typlokalität) hat a 10.515(2) Å, RaumgruppeFd3m, die Zusammensetzung CS_0.31(Sb_0.57Na_0.31Pb_0.02Bi_0.01)_0.91(Ta_1.88Nb_0.12)₂· (O_5.69OH, F_0.31)₆(OH, F)_0.69 Z 8; die Struktur wurde aufR 3.8,wR 4.3% verfeinert unter Benützung von 96 beobachteten Reflexen. Cesstibtantit vom Tanco Pegmatit hat a 10.496(1) Å, RaumgruppeFd3m, die Zusammensetzung (Cs_0.22K_0.01)_0.23(Na_0.45· Sb_0.39Pb_0.14Ca_0.06Bi_0.02)_1.06(Ta_1.95Nb_0.05)₂(O_5.78OH,F_0.22)₆(OH,F)_0.55,Z 8; seine Struktur wurde aufR 3.9wR 3.7% auf der Basis von 104 beobachteten Rettexen verfeinert. Cesstibtantit unterscheidet sich von normalen Pyrochloren insofern, als er signifikante Mengen von sehr großen Kationen, wie z.B. Cs enthält. Da these Kationen zu groß sind (^VIII r 1.60 Å) für eine konventionelle [8]-koordinierteA Stelle, nehmen she die [18]-koordinierten Positionen ein, welche normalerweise monovalente Anionen enthalten. Natürliche Cesstibtantitproben sind nicht ideal insofern als sowohl Cs als auch monovalente Anionen in der Position vorkommen. Somit ist Cesstibtantit intermediär zu den normalen Pyrochloren (mit nur monovalenten Anionen auf der Position) and den inversen Pyrochloren (mit ausschließlichen großen Kationen an der Position).

     

An occurrence of ardennite in quartz veins in piemontite schist,Western Otago,New Zealand

Summary Ardennite of complex composition: (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916916 Fe³⁺ _0.165 Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 occurs in crack-seal quartz veins in quartz-albite-piemontite-spessartine-phengitehematite-chlorite-rutile-tourmaline ± calcite schist of the Haast Schist Group near Arrow Junction, western Otago, New Zealand. The Mn²⁺/Mn³⁺-ratio is sensitive to calculations and to accuracy of analyses. Boron is detected in ardennite for the first time. Other properties include = 1.734(3), = 1.735(3), = 1.751(3), 2V_Z = 30(2)°;a = 8.721(1),b = 5.816(1),c = 18.545(3) Å,V = 940.7(2) ų. Associated mineral phases are spessartine, hematite, piemontite containing 0.7% SrO and 0.06% PbO, and phengite. Later-stage vein minerals comprise chlorite, albite, and manganoan calcite which were deposited under less highly oxidizing conditions. Digenite with minor intergrown covellite occurs in small amount with manganoan calcite and quartz in a cross-cutting late-stage veina chalcopyrite and native copper occur in other late-stage veins. Arsenic and other components of the ardennite and associated minerals are derived from highly oxidized ferromanganese oxide- and hydroxide-bearing siliceous pelagic sediments that formed the protolith for the piemontite schist. The veins formed at a relatively early stage after metamorphism peaked in the chlorite zone of the greenschist facies under conditions that have been estimated at about 4.5 kbar, 390 °C.

---

Vorkommen von Ardennit in Quarzgängen aus Piemontit-Schiefern, West-Otago, Neuseeland

Zusammenfassung Ardennit mit der Zusammensetzung (Mn²⁺ _3.488Ca_0.509Ba_0.002)₌₄(Mg_0.916Fe³⁺ _0.165Mn³⁺ _0.099Cu_0.033Ni_0.009Zn_0.006 Ti_0.008Al_4.764)₌₆(As⁵⁺ _0.823V⁵⁺ _0.022P_0.005B_0.069Al_0.042Si_5.039)₌₆O_21.81(OH)_6.17 tritt in Crack-seal-Quarzgängen in Quarz-Albit-Piemontit-Spessartin-Phengit-Hämatit-Chlorit-Rutil-Turmalin ± Calcit-Schiefern der Haast Schiefer-Gruppe nahe der Arrow Junction, West-Otago, Neuseeland, auf. Die Proportionen von Mn²⁺/Mn³⁺ hängen von der Kalkulation und der Genauigkeit der Analyse ab. Bor wird zum ersten Mal im Ardennit bestimmt. Andere Eigenschaften sind: = 1.734(3), = 1.735(3), = 1.751(3), 2Vz = 30(2)°; a = 8.721(1), b = 5.816(1), c = 18.545(3) Å, V = 940.7(2) Å3. Assoziierte Mineralphasen sind Spessartin, Hämatit, Piemontit, der 0.7% SrO und 0.06% PbO enthält und Phengit. Spät gebildete Gangmineralien, wie Chlorit, Albit und Mn-Calcit, sind unter geringer oxidierenden Bedingungen entstanden. Digenit mit etwas Covellin tritt in kleinen Mengen zusammen mit Mn-Calcit und Quartz in einem querschlägigen Gang auf, Chalcopyrit und gediegenes Kupfer kommen in anderen späten Gängen vor. Arsen und andere Komponenten des Ardennites and der assoziierten Minerale können von hochoxidierten, Fe-Mn-Oxid- und Hydroxyd-führenden, Sireichen, pelagischen Sedimenten hergeleitet werden, die das Ausgangsgestein für den Piemontit darstellen. Die Gänge wurden in einem relativ frühen Stadium, nach dem Metamorphosehöhepunkt, innerhalb der Chloritzone der Grünschiefer-Fazies, unter ungefähr 4.5 kbar und 390°C, gebildet.

---

---

With 4 Figures     

Boron isotope variations in nature: a synthesis

The large relative mass difference between the two stable isotopes of boron, ¹⁰B and ¹¹B, and the high geochemical reactivity of boron lead to significant isotope fractionation by natural processes. Published ¹¹B values (relative to the NBS SRM-951 standard) span a wide range of 90. The lowest ¹¹B values around — 30 are reported for non-marine evaporite minerals and certain tourmalines. The most ¹¹B-enriched reservoir known to date are brines from Australian salt lakes and the Dead Sea of Israel with ¹¹B values up to +59. Dissolved boron in present-day seawater has a constant world-wide ¹¹B value of + 39.5. In this paper, available ¹¹B data of a variety of natural fluid and solid samples from different geological environments are compiled and some of the most relevant aspects, including possible tracer applications of boron-isotope geochemistry, are summarized.

---

Résumé La grande différence relative de masse entre les isotopes stables du bore, ¹⁰B et ¹¹B, et la grande réactivité geochimique du bore ont pour conséquence un fractionnement isotopique naturel important. Les valeurs de ¹¹B publiées (par rapport au standard NBS SRM-951) varient de 90. Les valeurs de ¹¹B les plus basses (–30) correspondent aux evaporites non-marines et à certaines tourmalines. Le réservoir le plus enrichi en ¹¹B est représenté par les saumures des lacs salés d' Australie et par la Mer Morte en Israël, qui ont des valuers de ¹¹B allent jusqu'à + 59. L'eau de mer a une valeur de ¹¹B mondialement constante de + 39.5. Des valeurs de ¹¹B des solutions naturelles ainsi que des roches et minéraux de différentes origines, publiées jusqu'à présent, sont présentées ici. En outre quelques aspects importants concernant la géochimie des isotopes du bore y compris quelques applications sont exposés.

     

H2 in interstellar and extragalactic ices: infrared characteristics, ultraviolet production, and implications

H2 is the most abundant molecule in the universe. We demonstrate that this molecule may be an important component of interstellar and possibly intergalactic ices, both because it can be formed in situ, within the ices, and because gas phase H2 can freeze out onto dust grains in some astrophysical environments. The condensation-sublimation and infrared spectral properties of ices containing H2 are presented. We show that solid H2 in H20-rich ices can be detected by an infrared absorption band at 4137 cm-1 (2.417 micrometers). The surface binding energy of H2 to H2O ice was measured to the delta Hs/k = 555 +/- 35 K. Surface binding energies can be used to calculate the residence times of H2 on grain surfaces as a function of temperature. Some of the implications of these results are considered.     

The starburst in the Wolf-Rayet nucleus of the Liner NGC 6764

We present high resolution millimeter, near-infrared, and optical data on the Wolf-Rayet nucleus of the Liner NGC 6764. The millimeter¹²CO(1-0) maps were obtained using the Nobeyama Millimeter Interferometer. Near-infrared images in the K-band continuum and the 2.12µm H₂, 2.06µm He I, 2.17µm Br, and 1.64µm [Fe II] lines were taken with the MPE imaging spectrometer FAST at the William Herschel Telescope on La Palma, Spain. The optical data were obtained at the 3.5m telescope on Calar Alto, Spain. The measurements indicate a strong concentration of molecular gas and a massive starburst at the nucleus of NGC 6764. The interferometric position velocity map of the nucleus shows the presence of distinct molecular cloud complexes with an apparently asymmetric velocity field shifted towards the blue with respect to the systemic velocity of 2420 km s^–1. The distribution of the 2.12µm H₂ line flux exhibits extensions approximately perpendicular to the bar which are in agreement with structural features in VLA radio maps and IRAM 30m maps of the¹²CO(2–1) line emission. This may represent evidence for combination of a nuclear outflow and a central oval distortion of gas predicted by gas dynamical calculations as a response to a bar like potential. A detailed investigation of the Wolf-Rayet-feature at 466 nm indicates that it is spatially extended on a scale of a few arcseconds.     

Masses of macroscopic quark configurations in metric and dynamic theories of gravitation

Within the bounds of the general relativity and in gravidynamics, spherically-symmetric configurations are considered with the limit equation of state (P = ( - 4B)/3) and with the density increasing to the center. It is shown that unlike GR, where the existence of strange stars only is permissible (u-, d-, s-quarks), in the consistent dynamic theory of gravitation the existence ofstable configuration withr ^–2 (quark star) is possible with a bag out of quark-gluon plasma which includes all possible quark flavors (u, d, s, c, b, t, .. .). The total mass of such a compact object with the bag of the radius of 10 km (whose surface consists of the strange self-bound matter) must be 6 - 7M .     

Cross section parameterizations for cosmic-ray nuclei. I. Single nucleon removal

Parameterizations of single nucleon removal from the electromagnetic and strong interactions of cosmic rays with nuclei are presented. These parameterizations are based upon the theoretical models developed by Baur, Bertulani, Benesh, Cook, Vary, Norbury, and Townsend. They should be very suitable for use in cosmic-ray propagation through interstellar space, Earth's atmosphere, lunar samples, meteorites, spacecraft walls, and lunar and martian habitats.