Uplift rates defined by U-series and 14C ages of serpulid-encrusted speleothems from submerged caves near Siracusa,Sicily (Italy)

We have established a plausible rate of uplift near Siracusa in southeastern Sicily (Italy) over the last glacial–interglacial cycle using U-series ages of submerged speleothem calcite and ¹⁴C ages of calcite serpulid layers that encrust the speleothems during cave submergence. The precisely determined ages of these sea level benchmarks were compared with expected relative sea level position based on glacio-hydro-isostatic modeling to assess the rate of uplift in this region. When combined with the age of various late Holocene archaeological sites that have been recently described and characterized in terms of their functional position relative to sea level these data collectively define a rate of uplift ≤0.4 mm a^?1 along this portion of the Sicilian coastline. These results are consistent with an age assignment of marine isotope stage (MIS) 5.3 or 5.5 for the Akradina terrace, which in turn places temporal constraints on paleoshorelines above and below this level.     

A flume experiment to examine underwater sound generation by flowing water

The hydrogeomorphology and ecology of rivers and streams has been subject of intensive research for many decades. However, hydraulically-generated acoustics have been mostly neglected, even though this physical attribute is a robust signal in fluvial ecosystems. Physical generated underwater sound can be used to quantify hydro-geomorphic processes, to differentiate among aquatic habitat types, and it has implications on the behavior of organisms. In this study, acoustic signals were quantified in a flume by varying hydro-geomorphic drivers and the related turbulence and bubble formation. The acoustic signals were recorded using two hydrophones and analyzed using a signal processing software, over 31 third-octave bands (20 Hz–20 kHz), and then combined in 10 octave bands. The analytical method allowed for a major improvement of the signal-to-noise ratio, therefore greatly reducing the uncertainty in our analyses. Water velocity, relative submergence, and flow obstructions were manipulated in the flume and the resultant acoustic signals recorded. Increasing relative submergence ratio and water velocity were important for reaching a turbulence threshold above which distinct sound levels were generated. Increases in water velocity resulted in increased sound levels over a wide range of frequencies. The increases in sound levels due to relative submergence of obstacles were most pronounced in midrange frequencies (125 Hz–2 kHz). Flow obstructions in running waters created turbulence and air bubble formation, which again produced specific sound signatures.     

Stress protein expression in Ampelisca abdita (Amphipoda) exposed to sediments from San Francisco Bay

Stress proteins (heat shock proteins, hsps) form part of the cellular protein repair system, and are induced by a wide variety of Stressors. To determine their suitability as tools for assessing sublethal sediment toxicity, we measured levels of members of the stress protein families hsp60 and hsp70 in benthic estuarine amphipods (Ampelisca abdita) exposed to sediments from 23 different sampling sites in San Francisco Bay for 10 d. Concentrations of sediment-associated xenobiotics were determined. Per cent survival was recorded and surviving animals were analysed for stress proteins using western blotting techniques. An inverse correlation (r² = 0.44) was seen between amphipod survival and hsp64 levels, and hsp64 levels were positively correlated with concentrations of total polycyclic aromatic hydrocarbons (PAHs) (r² = 0.5). Principal component analysis revealed that amphipod mortality was linked to a combination of several PAHs (phenanthrene, fluoranthene, pyrene, benzo(a)pyrene) and di-n-butylphthalate at southern San Francisco Bay sites. At northern San Francisco Bay sites, negative correlations were found between hsp64 levels and organotin compounds (MBT, DBT, TBT), and between hsp71 levels and the PAHs, benzo (b,k)fluoranthene and benzo(G,H,I)perylene, suggesting an inhibitory effect of these compounds on stress protein expression.     

Camera system considerations for geomorphic applications of SfM photogrammetry

The availability of high‐resolution, multi‐temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three‐dimensional topographic point measurements acquired from structure‐from‐motion (SfM) photogrammetry have been shown to be highly accurate and cost‐effective compared to laser‐based alternatives in some environments. Use of consumer‐grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM‐ and LiDAR‐derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. Greater information capacity of source imagery was found to increase pixel matching quality, which produced eight times greater point density and six times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100 000 m³) on an unvegetated fluvial surface; change detection determined from repeat LiDAR and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post‐processing techniques increased point density by 5–25% and decreased processing time by 10–30%. Regression analysis of 67 reviewed datasets revealed that the best explanatory variable to predict accuracy of SfM data is photographic scale. Despite the prevalent use of object distance ratios to describe scale, nominal ground sample distance is shown to be a superior metric, explaining 68% of the variability in mean absolute vertical error. Published 2016. This article is a U.S. Government work and is in the public domain in the USA     

On High-Frequency Topography-Implied Gravity Signals for a Height System Unification Using GOCE-Based Global Geopotential Models

National height reference systems have conventionally been linked to the local mean sea level, observed at individual tide gauges. Due to variations in the sea surface topography, the reference levels of these systems are inconsistent, causing height datum offsets of up to ±1–2 m. For the unification of height systems, a satellite-based method is presented that utilizes global geopotential models (GGMs) derived from ESA’s satellite mission Gravity field and steady-state Ocean Circulation Explorer (GOCE). In this context, height datum offsets are estimated within a least squares adjustment by comparing the GGM information with measured GNSS/leveling data. While the GNSS/leveling data comprises the full spectral information, GOCE GGMs are restricted to long wavelengths according to the maximum degree of their spherical harmonic representation. To provide accurate height datum offsets, it is indispensable to account for the remaining signal above this maximum degree, known as the omission error of the GGM. Therefore, a combination of the GOCE information with the high-resolution Earth Gravitational Model 2008 (EGM2008) is performed. The main contribution of this paper is to analyze the benefit, when high-frequency topography-implied gravity signals are additionally used to reduce the remaining omission error of EGM2008. In terms of a spectral extension, a new method is proposed that does not rely on an assumed spectral consistency of topographic heights and implied gravity as is the case for the residual terrain modeling (RTM) technique. In the first step of this new approach, gravity forward modeling based on tesseroid mass bodies is performed according to the Rock–Water–Ice (RWI) approach. In a second step, the resulting full spectral RWI-based topographic potential values are reduced by the effect of the topographic gravity field model RWI_TOPO_2015, thus, removing the long to medium wavelengths. By using the latest GOCE GGMs, the impact of topography-implied gravity signals on the estimation of height datum offsets is analyzed in detail for representative GNSS/leveling data sets in Germany, Austria, and Brazil. Besides considerable changes in the estimated offset of up to 3 cm, the conducted analyses show that significant improvements of 30–40% can be achieved in terms of a reduced standard deviation and range of the least squares adjusted residuals.     

The informal Australian city

In recent years, a vibrant literature on urban informality has emerged in urban geography. A key claim of this literature is that informality is not only present in cities in the Global South, and that the concept can be usefully applied to understand important dimensions of urbanisation in cities in the Global North. In this paper, we apply insights from that literature to an examination of informality in Australian cities, as a means of deepening our understanding of changes currently underway in urban governance and politics. Drawing on that literature and our own research into informal practices in Australian cities, we examine the forces that help to produce informality, the diverse forms and agents of informality, the forms of authority that they enact, and their relationship to formal economies, regulations and politics. We use examples of informal housing, informal labour, do-it-yourself music venues, graffiti and its regulation, food foraging, and queer community building in Sydney to illustrate our arguments. We conclude by reflecting on the lessons learnt across these diverse cases for our understanding of urban governance and politics in Australia, and offer an agenda for further research on this issue.     

Productivity, trophic levels and size spectra of zooplankton in northern Norwegian shelf regions

Many studies have been conducted in northern Norwegian shelf regions to assess distributions and abundances of zooplankton in the last decade using towed Scanfish-conductivity, temperature and depth sensors (CTD)–optical plankton counter (OPC), and plankton nets. Significant progresses have been made in understanding dominant species, life histories and behavior, and in using size-structured data to identify dominant species in a certain size range. Using these Scanfish–CTD–OPC data, the analysis of zooplankton community size structures, compositions and their relationships with water types is made along the shelf region from Lofoten, North Cape to Varangerfjorden. From the relationships between the water types and zooplankton communities, the transports and exchanges of zooplankton communities between the Norwegian Coastal and Norwegian Atlantic Waters in regions near Malangsgrunnen and Nordvestbanken are examined. The biovolume (biomass) spectra are further analyzed for the productivity, trophic levels and seasonality of communities in these regions, indicating a steeper slope of the biovolume spectrum for a community dominated by herbivorous species in spring and a flatter slope for a community dominated by carnivorous–omnivorous species in winter. The comparison with the zooplankton biovolume spectra obtained in areas west of Antarctic Peninsula is made to examine and understand the differences in the zooplankton biovolume spectra, their trophic dynamics and potential human impacts between different regions.     

Petrology of chlorite-spinel marbles from NW Spitsbergen (Svalbard)

Small dolomite marble lenses and bands occur in the vast Caledonian migmatite and gneiss area of NW Spitsbergen (Svalbard archipelago). The fine-banded marbles contain numerous assemblages of minerals: calcite, dolomite, olivine, clinohumite, diopside, amphibole, chlorite, spiner and phologopite. The coexistence of calcite + dolomite + olivine + chlorite + spinel over the entire area indicates metamorphic temperatures of 600 to 680° at an estimated pressure of 4 kilobars. A temperature of near 600°C for the peak of metamorphism is suggested by mineral assemblages at the southernmost locality, Jäderinfjellet. Calcite-dolomite geothermometry indicated 595°C at the same locality. The spatial distribution of the marble assemblages suggests that metamorphism occurred under nearly isothermal conditions over an area of at least 25 by 30 kilometres.