Effects of lossy compression on remote sensing image classification of forest areas

Lossy compression is being increasingly used in remote sensing; however, its effects on classification have scarcely been studied. This paper studies the implications of JPEG (JPG) and JPEG 2000 (J2K) lossy compression for image classification of forests in Mediterranean areas. Results explore the impact of the compression on the images themselves as well as on the obtained classification. The results indicate that classifications made with previously compressed radiometrically corrected images and topoclimatic variables are not negatively affected by compression, even at quite high compression ratios. Indeed, JPG compression can be applied to images at a compression ratio (CR, ratio between the size of the original file and the size of the compressed file) of 10:1 or even 20:1 (for both JPG and J2K). Nevertheless, the fragmentation of the study area must be taken into account: in less fragmented zones, high CR are possible for both JPG and J2K, but in fragmented zones, JPG is not advisable, and when J2K is used, only a medium CR is recommended (3.33:1 to 5:1). Taking into account that J2K produces fewer artefacts at higher CR, the study not only contributes with optimum CR recommendations, but also found that the J2K compression standard (ISO 15444-1) is better than the JPG (ISO 10918-1) when applied to image classification. Although J2K is computationally more expensive, this is no longer a critical issue with current computer technology.     

Evaluating a thermal image sharpening model over a mixed agricultural landscape in India

Fine spatial resolution (e.g., <300 m) thermal data are needed regularly to characterise the temporal pattern of surface moisture status, water stress, and to forecast agriculture drought and famine. However, current optical sensors do not provide frequent thermal data at a fine spatial resolution. The TsHARP model provides a possibility to generate fine spatial resolution thermal data from coarse spatial resolution (≥1 km) data on the basis of an anticipated inverse linear relationship between the normalised difference vegetation index (NDVI) at fine spatial resolution and land surface temperature at coarse spatial resolution. The current study utilised the TsHARP model over a mixed agricultural landscape in the northern part of India. Five variants of the model were analysed, including the original model, for their efficiency. Those five variants were the global model (original); the resolution-adjusted global model; the piecewise regression model; the stratified model; and the local model. The models were first evaluated using Advanced Space-borne Thermal Emission Reflection Radiometer (ASTER) thermal data (90 m) aggregated to the following spatial resolutions: 180 m, 270 m, 450 m, 630 m, 810 m and 990 m. Although sharpening was undertaken for spatial resolutions from 990 m to 90 m, root mean square error (RMSE) of <2 K could, on average, be achieved only for 990–270 m in the ASTER data. The RMSE of the sharpened images at 270 m, using ASTER data, from the global, resolution-adjusted global, piecewise regression, stratification and local models were 1.91, 1.89, 1.96, 1.91, 1.70 K, respectively. The global model, resolution-adjusted global model and local model yielded higher accuracy, and were applied to sharpen MODIS thermal data (1 km) to the target spatial resolutions. Aggregated ASTER thermal data were considered as a reference at the respective target spatial resolutions to assess the prediction results from MODIS data. The RMSE of the predicted sharpened image from MODIS using the global, resolution-adjusted global and local models at 250 m were 3.08, 2.92 and 1.98 K, respectively. The local model consistently led to more accurate sharpened predictions by comparison to other variants.     

A literature synthesis of LiDAR applications in transportation: feature extraction and geometric assessments of highways

Interest in using Light Detection and Ranging (LiDAR) technology in Transportation Engineering has grown over the past decade. The high accuracy of LiDAR datasets and the efficiency by which they can be collected has led many transportation agencies to consider mobile LiDAR as an alternative to conventional tools when surveying roadway infrastructure. Nonetheless, extracting semantic information from LiDAR datasets can be extremely challenging. Although extracting roadway features from LiDAR has been considered in previous research, the extraction of some features has received more attention than others. In fact, for some roadway design elements, attempts to extract those elements from LiDAR have been extremely scarce. To document the research that has been done in this area, this paper conducts a thorough review of existing studies while also highlighting areas where more research is required. Unlike previous research, this paper includes a thorough review of the previous attempts at data extraction from LiDAR while summarizing the detailed steps of the extraction procedure proposed in each study. Moreover, the paper also identifies common tools and techniques used to extract information from LiDAR for transportation applications. The paper also highlights common limitations in existing algorithms that could be improved in future research. This paper represents a valuable resource for researchers and practitioners interested in knowing the current state of research on the applications of LiDAR in the field of Transportation Engineering while also understanding the opportunities and challenges that lie ahead.     

Finding and sharing GIS methods based on the questions they answer

Geographic information has become central for data scientists of many disciplines to put their analyzes into a spatio-temporal perspective. However, just as the volume and variety of data sources on the Web grow, it becomes increasingly harder for analysts to be familiar with all the available geospatial tools, including toolboxes in Geographic Information Systems (GIS), R packages, and Python modules. Even though the semantics of the questions answered by these tools can be broadly shared, tools and data sources are still divided by syntax and platform-specific technicalities. It would, therefore, be hugely beneficial for information science if analysts could simply ask questions in generic and familiar terms to obtain the tools and data necessary to answer them. In this article, we systematically investigate the analytic questions that lie behind a range of common GIS tools, and we propose a semantic framework to match analytic questions and tools that are capable of answering them. To support the matching process, we define a tractable subset of SPARQL, the query language of the Semantic Web, and we propose and test an algorithm for computing query containment. We illustrate the identification of tools to answer user questions on a set of common user requests.     

Geomasking sensitive health data and privacy protection: an evaluation using an E911 database

Geomasking is used to provide privacy protection for individual address information while maintaining spatial resolution for mapping purposes. Donut geomasking and other random perturbation geomasking algorithms rely on the assumption of a homogeneously distributed population to calculate displacement distances, leading to possible under-protection of individuals when this condition is not met. Using household data from 2007, we evaluated the performance of donut geomasking in Orange County, North Carolina. We calculated the estimated k-anonymity for every household based on the assumption of uniform household distribution. We then determined the actual k-anonymity by revealing household locations contained in the county E911 database. Census block groups in mixed-use areas with high population distribution heterogeneity were the most likely to have privacy protection below selected criteria. For heterogeneous populations, we suggest tripling the minimum displacement area in the donut to protect privacy with a less than 1% error rate.     

Entropy-based fuzzy classification parameter optimization using uncertainty variation across spatial resolution

In the past researchers have suggested hard classification approaches for pure pixel remote sensing data and to handle mixed pixels soft classification approaches have been studied for land cover mapping. In this research work, while selecting fuzzy c-means (FCM) as a base soft classifier entropy parameter has been added. For this research work Resourcesat-1 (IRS-P6) datasets from AWIFS, LISSIII and LISS-IV sensors of same date have been used. AWIFS and LISS-III datasets have been used for classification and LISS-III and LISS-IV data were used for reference data generation, respectively. Soft classified outputs from entropy based FCM classifiers for AWIFS and LISS-III datasets have been evaluated using sub-pixel confusion uncertainty matrix (SCM). It has been observed that output from FCM classifier has higher classification accuracy with higher uncertainty but entropy-based classifier with optimum value of regularizing parameter generates classified output with minimum uncertainty.     

Kinematic precise point positioning at remote marine platforms

Precise kinematic differential positioning using the global positioning system (GPS) at a marine platform usually requires a relatively short distance (e.g. <500 km) to a land-based reference station. As an alternative, precise point positioning (PPP) is normally considered free from this limiting requirement. However, due to the prerequisite of network-based satellite products, PPP at a remote marine platform may still be affected by its distance to the reference network. Hence, this paper investigates this scenario by configuring rings of reference stations with different radii centered on a to-be-positioned marine platform. Particularly, we applied ambiguity resolution at a single station to PPP by estimating uncalibrated phase delays (UPDs). We used three rings of reference stations centered on a vessel, with radii of roughly 900, 2,000 and 3,600 km, to determine satellite clocks and UPDs independently. For comparison, we also performed differential positioning based on a single reference station with baseline lengths of about 400, 1,700 and 2,800 km. We demonstrate that, despite the increasing ring-network radius to a few 1,000 km, the overall change in accuracy of the satellite clocks that are used at the vessel is smaller than 0.02 ns, and the RMS values of differences between the three sets of narrow-lane UPD estimates are around 0.05 cycles only. Moreover, the kinematic positioning accuracy of PPP is affected by the increasing ring-network radius, but can still achieve several centimeters after ambiguity resolution when the vessel is over a few 1,000 km away from the ring network, showing better performance than that of differential positioning. Therefore, we propose that ambiguity-fixed PPP can be used at remote marine platforms that support precise oceanographic and geophysical applications in open oceans.     

Assessment of the LandStar Real-Time DGPS Service under Several Operational Conditions

LandStar is a differential global positioning service (DGPS) that provides 24-h real-time positioning for various applications on land, water, and air in North America, Australia, New Zealand, Europe, and Africa. Its focus is on real-time applications requiring a submeter positioning capability such as agriculture, forestry, Geospatial Information Systems (GIS), survey/mapping, and land/vehicular navigation. LandStar uses a Wide Area Network of reference stations to derive DGPS corrections to model the variation of GPS error sources over a large area. These model parameters are used by the Virtual Reference Station processors to calculate standard corrections that are available for all predefined locations in the network. The corrections are transmitted to the user by L-band satellite communication in the standard RTCM SC104 DGPS correction format. This article investigates the performance of the LandStar Mk III system under various operational conditions and assesses its performance in both static and kinematic modes. Four field tests were conducted during 12 months that tested the sysem in clear static and kinematic conditions as well as suboptimal environments associated with low and heavy foliage conditions. Both the accuracy and availability of the system under these conditions is investigated, with an emphasis on whether the above variables are caused by the LandStar system differential corrections, the GPS measurements, or a combination of both. ? 1999 John Wiley & Sons, Inc.     

Preparation of volume table of SAL (Shorea robusta) - an approach using satellite data

Sal (Shorea robusta) is an important forest tree species in north and north-eastern India. Large-scale plantations of this species have been raised there under taungya and coppice system of management. The conventional volume table prepared for high sal forest is referred to infer the volume of production of this species. Earlier workers have used aerial remote sensing data to develop volume tables of this species. In the present study a volume table for sal is developed based on remotely sensed satellite data using a regression technique. A two-step method was developed to estimate mean tree volume from satellite data. In step 1, mean crown diameter — an intermediate variable - was estimated from satellite data. In step 2, the estimated mean crown diameter was used to estimate the mean tree volume. Addition of age of the crop as an independent variable improved the predictive ability of the regression equation.     

Important considerations about space‐time data: Modeling,scrutiny, and ratification

Space‐time data are becoming more abundant as time goes by, with hands‐on interest in them becoming more prevalent. These data have a very sensitive ordering in space and time, one that the simplest of recording errors can scramble. These data are also complex, containing both spatial and temporal autocorrelation coupled with their interaction. One goal of many researchers is to disentangle and account for these autocorrelation components in a parsimonious way. This article presents three competing model specifications to achieve this end. In addition, it outlines seven best practices for vetting space‐time datasets. This article cites a publicly available corrupt (containing at least errors of omission) rabies dataset to illustrate how a large volume of potentially valuable data can be rendered meaningless. In addition, it exemplifies postulated contentions about the United States National Cancer Institute Surveillance, Epidemiology, and End Results Program’s 1969–2018 population‐by‐county dataset, a collection of population counts held in high esteem. One major empirical finding is that this particular dataset exhibits traits that may merit remedial revisions action. A key conceptual finding is a suggested set of best practices for space‐time data proofreading. These two findings contribute to an ultimate goal of a large collection of certified open access space‐time datasets supporting repeatable and replicable scientific analyses.