Intra‐ and interannual export of nitrogen and phosphorus in the subtropical Richmond River catchment,Australia

Nitrogen and phosphorus concentrations were measured and exports were calculated in the subtropical Richmond River catchment between July 1994 and June 1996. A stratified sampling approach was adopted owing to the extreme and rapid changes in riverine discharge, which varied by up to 10 000 times over the study period. Nutrient concentrations were lowest during baseflow. During storm discharge, dissolve inorganic and organic and particulate nitrogen and phosphorus concentrations increased two‐ to five fold, and followed hysteresis patterns that were attributed to the integration and/or depletion of catchment nutrient sources during an event. Dissolved organic nitrogen and particulate phosphorus were the dominant nutrient forms. Land use and antecedent conditions had a large influence on nutrient concentrations and exports. During the 1995–96 year (slightly above the mean annual discharge) 96% of nitrogen and 98% of phosphorus loads were transported in less than 6% of the time. When averaged across the catchment, monthly riverine nutrient loads varied by up to 1061‐fold during the study and exports were approximately four‐fold greater during the second year relative to the first. The subtropical Richmond River catchment has greater intra‐ and potential interannual variability in nutrient loads and exports when compared with temperate catchments from other parts of the world. It is suggested that in tropical and subtropical Australian catchments with large intra‐ and interannual variation in discharge, the need for parameterizing the antecedent conditions, such as the degree of nutrient storage, may make it difficult to model spatial and temporal (short time‐scale) nutrient exports. Copyright © 2000 John Wiley & Sons, Ltd.     

The prehistoric and preindustrial deforestation of Europe

Humans have transformed Europe's landscapes since the establishment of the first agricultural societies in the mid-Holocene. The most important anthropogenic alteration of the natural environment was the clearing of forests to establish cropland and pasture, and the exploitation of forests for fuel wood and construction materials. While the archaeological and paleoecological record documents the time history of anthropogenic deforestation at numerous individual sites, to study the effect that prehistoric and preindustrial deforestation had on continental-scale carbon and water cycles we require spatially explicit maps of changing forest cover through time. Previous attempts to map preindustrial anthropogenic land use and land cover change addressed only the recent past, or relied on simplistic extrapolations of present day land use patterns to past conditions. In this study we created a very high resolution, annually resolved time series of anthropogenic deforestation in Europe over the past three millennia by 1) digitizing and synthesizing a database of population history for Europe and surrounding areas, 2) developing a model to simulate anthropogenic deforestation based on population density that handles technological progress, and 3) applying the database and model to a gridded dataset of land suitability for agriculture and pasture to simulate spatial and temporal trends in anthropogenic deforestation. Our model results provide reasonable estimations of deforestation in Europe when compared to historical accounts. We simulate extensive European deforestation at 1000 BC, implying that past attempts to quantify anthropogenic perturbation of the Holocene carbon cycle may have greatly underestimated early human impact on the climate system.     

Improvements and Corrections to AT123D Code

Although based on exact analytical solutions, semi‐analytical solute transport models can have significant numerical error in applications with high frequency oscillatory source terms and when parameter value combinations cause series solution approximations to converge slowly. Methods for correcting these numerical errors are presented and implemented in the AT123D code, which employs Green's functions to represent point, linear, and rectangular prismatic source zones. In order to increase its computational accuracy, a Romberg numerical integration scheme was added to AT123D with prespecified error criteria, variable time stepping, and partitioning of the integral to handle rapidly changing source terms. More rapidly converging series solution approximations for the Green's functions were also incorporated to improve both accuracy and computational efficiency for finite‐depth aquifers. AT123D also has been modified to eliminate redundant calculations at points where approximate steady‐state conditions have been reached to improve computational efficiency during numerical integration. These modifications help to decrease computer run times that can be excessive for three‐dimensional problems with large numbers of computational points, small time steps, and/or long simulation time periods. Errors in the original AT123D code also were corrected in this modified version, AT123D‐AT, in order to accurately simulate finite‐duration (pulse) source releases.     

Impacts of stormwater runoff in the Southern California Bight: Relationships among plume constituents

The effects from two winter rain storms on the coastal ocean of the Southern California Bight were examined as part of the Bight ‘03 program during February 2004 and February–March 2005. The impacts of stormwater from fecal indicator bacteria, water column toxicity, and nutrients were evaluated for five major river discharges: the Santa Clara River, Ballona Creek, the San Pedro Shelf (including the Los Angeles, San Gabriel, and Santa Ana Rivers), the San Diego River, and the Tijuana River. Exceedances of bacterial standards were observed in most of the systems. However, the areas of impact were generally spatially limited, and contaminant concentrations decreased below California Ocean Plan standards typically within 2–3 days. The largest bacterial concentrations occurred in the Tijuana River system where exceedances of fecal indicator bacteria were noted well away from the river mouth. Maximum nitrate concentrations (~40 μM) occurred in the San Pedro Shelf region near the mouth of the Los Angeles River. Based on the results of general linear models, individual sources of stormwater differ in both nutrient concentrations and the concentration and composition of fecal indicator bacteria. While nutrients appeared to decrease in plume waters due to simple mixing and dilution, the concentration of fecal indicator bacteria in plumes depends on more than loading and dilution rates. The relationships between contaminants (nutrients and fecal indicator bacteria) and plume indicators (salinity and total suspended solids) were not strong indicating the presence of other potentially important sources and/or sinks of both nutrients and fecal indicator bacteria. California Ocean Plan standards were often exceeded in waters containing greater than 10% stormwater (<28–30 salinity range). The median concentration dropped below the standard in the 32–33 salinity range (1–4% stormwater) for total coliforms and Enterococcus spp. and in the 28–30 salinity range (10–16% stormwater) for fecal coliforms. Nutrients showed a similar pattern with the highest median concentrations in water with greater than 10% stormwater. Relationships between colored dissolved organic matter (CDOM) and salinity and between total suspended solids and beam attenuation indicate that readily measurable, optically active variables can be used as proxies to provide at least a qualitative, if not quantitative, evaluation of the distribution of the dissolved, as well as the particulate, components of stormwater plumes. In this context, both CDOM absorption and the beam attenuation coefficient can be derived from satellite ocean color measurements of inherent optical properties suggesting that remote sensing of ocean color should be useful in mapping the spatial areas and durations of impacts from these contaminants.     

The ionospheric signature of transient dayside reconnection and the associated pulsed convection return flow

Three SuperDARN coherent HF radars are employed to investigate the excitation of convection in the dayside high-latitude ionosphere in response to transient reconnection occurring in the cusp region. This study demonstrates the existence of transient antisunward-propagating backscatter features at the expected location of the ionospheric footprint of the cusp region, which have a repetition rate near 10 min. These are interpreted as the ionospheric signature of flux transfer events. Moreover, transient sunward-propagating regions of backscatter are observed in the convection return flow regions of both the pre- and post-noon sectors. These patches are observed to propagate towards the noon sector from at least as far around the auroral zone as 07 MLT in the pre-noon sector and 17 MLT in the post-noon sector, travelling with a veloCity of approximately 1.5 to 2 km s⁻¹. These return flow patches have a repetition rate similar to that of the transient features observed at local noon. While providing supporting evidence for the impulsive nature of convection flow, the observation of sunward-propagating features in the return flow region is not consistent with current conceptual models of the excitation of convection.     

The science of European marine reserves: Status,efficacy, and future needs

The ecologically and socio-economically important marine ecosystems of Europe are facing severe threats from a variety of human impacts. To mitigate and potentially reverse some of these impacts, the European Union (EU) has mandated the implementation of the Marine Strategy Framework Directive (MSFD) in order to achieve Good Environmental Status (GES) in EU waters by 2020. The primary initiative for achieving GES is the implementation of coherent networks of marine protected areas (MPAs). Marine reserves are an important type of MPA in which no extraction is allowed, but their usefulness depends upon a number of ecological, management, and political factors. This paper provides a synthesis of the ecological effects of existing European marine reserves and the factors (social and ecological) underlying their effectiveness. Results show that existing European marine reserves foster significant positive increases in key biological variables (density, biomass, body size, and species richness) compared with areas receiving less protection, a pattern mirrored by marine reserves around the globe. For marine reserves to achieve their ecological and social goals, however, they must be designed, managed, and enforced properly. In addition, identifying whether protected areas are ecologically connected as a network, as well as where new MPAs should be established according to the MSFD, requires information on the connectivity of populations across large areas. The adoption of the MSFD demonstrates willingness to achieve the long-term protection of Europe's marine ecosystems, but whether the political will (local, regional, and continent wide) is strong enough to see its mandates through remains to be seen. Although the MSFD does not explicitly require marine reserves, an important step towards the protection of Europe's marine ecosystems is the establishment of marine reserves within wider-use MPAs as connected networks across large spatial scales.     

The relationship between VHF radar auroral backscatter amplitude and Doppler velocity: a statistical study

A statistical investigation of the relationship between VHF radar auroral backscatter intensity and Doppler velocity has been undertaken with data collected from 8 years operation of the Wick site of the Sweden And Britain Radar-auroral Experiment (SABRE). The results indicate three different regimes within the statistical data set; firstly, for Doppler velocities <200 m s⁻¹, the backscatter intensity (measured in decibels) remains relatively constant. Secondly, a linear relationship is observed between the backscatter intensity (in decibels) and Doppler velocity for velocities between 200 m s⁻¹ and 700 m s⁻¹. At velocities greater than 700 m s⁻¹ the backscatter intensity saturates at a maximum value as the Doppler velocity increases. There are three possible geophysical mechanisms for the saturation in the backscatter intensity at high phase speeds: a saturation in the irregularity turbulence level, a maximisation of the scattering volume, and a modification of the local ambient electron density. There is also a difference in the dependence of the backscatter intensity on Doppler velocity for the flow towards and away from the radar. The results for flow towards the radar exhibit a consistent relationship between backscatter intensity and measured velocities throughout the solar cycle. For flow away from the radar, however, the relationship between backscatter intensity and Doppler velocity varies during the solar cycle. The geometry of the SABRE system ensures that flow towards the radar is predominantly associated with the eastward electrojet, and flow away is associated with the westward electrojet. The difference in the backscatter intensity variation as a function of Doppler velocity is attributed to asymmetries between the eastward and westward electrojets and the geophysical parameters controlling the backscatter amplitude.     

Width control on event-scale deposition and evacuation of sediment in bedrock-confined channels

In mixed bedrock–alluvial rivers, the response of the system to a flood event can be affected by a number of factors, including coarse sediment availability in the channel, sediment supply from the hillslopes and upstream, flood sequencing and coarse sediment grain size distribution. However, the impact of along-stream changes in channel width on bedload transport dynamics remains largely unexplored. We combine field data, theory and numerical modelling to address this gap. First, we present observations from the Daan River gorge in western Taiwan, where the river flows through a 1 km long 20–50 m wide bedrock gorge bounded upstream and downstream by wide braidplains. We documented two flood events during which coarse sediment evacuation and redeposition appear to cause changes of up to several metres in channel bed elevation. Motivated by this case study, we examined the relationships between discharge, channel width and bedload transport capacity, and show that for a given slope narrow channels transport bedload more efficiently than wide ones at low discharges, whereas wider channels are more efficient at high discharges. We used the model sedFlow to explore this effect, running a random sequence of floods through a channel with a narrow gorge section bounded upstream and downstream by wider reaches. Channel response to imposed floods is complex, as high and low discharges drive different spatial patterns of erosion and deposition, and the channel may experience both of these regimes during the peak and recession periods of each flood. Our modelling suggests that width differences alone can drive substantial variations in sediment flux and bed response, without the need for variations in sediment supply or mobility. The fluctuations in sediment transport rates that result from width variations can lead to intermittent bed exposure, driving incision in different segments of the channel during different portions of the hydrograph. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

The relationship between electric fields, conductances and currents in the high-latitude ionosphere: a statistical study using EISCAT data

The relationship between electric fields, height-integrated conductivities and electric currents in the high-latitude nightside electrojet region is known to be complex. The tristatic nature of the EISCAT UHF radar facility provides an excellent means of exploring this interrelationship as it enables simultaneous estimates to be made of the full electric field vector and the ionospheric Hall and Pedersen conductances, further allowing the determination of both field-perpendicular electric current components. Over 1300 h of common programme observations by the UHF radar system provide the basis of a statistical study of electric fields, conductances and currents in the high-latitude ionosphere, from which preliminary results are presented. Times at which there is significant solar contribution to the ionospheric conductances have been excluded by limiting the observations according to solar zenith angle. Initial results indicate that, in general, the times of peak conductance, identified from the entire set of EISCAT observations, do not correspond to the times of the largest electric field values; the relative contribution of ionospheric conductance and electric field to the electrojet currents therefore depends critically on local time, a conclusion which corroborates work by previous authors. Simultaneous measurements confirm a tendency for a decrease in both Hall and Pedersen conductances to be accompanied by an increase in the electric field, at least for moderate and large electric field value, a tendency which is also identified to some extent in the ratio of the conductances, which acts as an indicator of the energy of precipitating particles.     

Characterization of Turkish coals: a nationwide perspective

The U.S. Geological Survey (USGS) and the Turkish General Directorate of Mineral Research and Exploration (Maden Tetkik ve Arama Genel Müdürlügü, MTA) are working together to provide a better understanding of the chemical properties of Turkish coals from major Turkish lignite producing areas.The coals in Turkey are generally low rank (lignite or subbituminous) formed in several different depositional environments at different geologic times and have differing chemical properties. Eocene coals are limited to northern Turkey; Oligocene coals, found in the Thrace Basins of northwestern Turkey, are intercalated with marine sediments; Miocene coals are generally located in Western Turkey. The coal deposits, which have limnic characteristics, have relatively abundant reserves. Pliocene–Pleistocene coals are found in the eastern part of Turkey. Most of these coals have low calorific values, high moisture, and high ash contents.Analysis of 143 coal channel samples (most are lignite and subbituminous in rank, but a few are bituminous and one is anthracitic in rank) has been completed for up to 54 elements and other coal properties using a variety of analytical techniques, including inductively coupled plasma emission and mass spectrometry, instrumental neutron activation analysis, and various single element techniques and ASTM standard procedures. Many of these coals have elemental concentrations similar to U.S. lignites found in the Gulf Coast and Fort Union regions. However, maximum or mean concentrations of B, Cr, Cs, Ni, As, Br, Sb, Cs, and U in Turkey are higher than the corresponding maximum or mean values found in either the Fort Union or Gulf Coast regions.