Fluvial processes and settlement in arid environments

The impact of fluvial geomorphic processes on settlement in deserts is tie d to two conflicting factors: the extreme rarity of geomorphic events on the one hand, and the violence of the geomorphic forces coupled with a minimal resistance to erosion on the other.The unique character of desert floods calls for a careful geomorphic evaluation in the siting of settlements and transportation facilities. On the beneficial sid e, the geomorphic processes involved enable, under some conditions, the local exploitation of floodwaters which percolate in the alluvium of the upper tributaries, as well as the utilization of the hydraulic geometry for estimating discharge characteristics.On a larger scale, human interference often disrupts the delicate quasi-equilbrium between erosion and sedimentation in deserts. Although our poor understanding of many aspects of the mechanism of response makes it difficult to separate the effects from those of climatic changes, enough information is available to document the detrimental effect of inconsiderate management on both the regional and local levels.     

Natural vibrations of shear wall buildings on flexible supports

A shear wall building is considered as an assembly of plane and curvilinear shear walls tied together by floor slabs to act as a composite unit. Based on this conception and the continuous medium approach, the governing dynamic equations and boundary conditions are derived from energy principles, using Vlasov's theory of thin-walled beams. All primary and secondary inertia forces, as well as the influence of elastic foundation flexibility, have been taken into consideration. A numerical solution of the dynamic equations is achieved by employing the Ritz-Galerkin technique, yielding both natural frequencies and mode shapes. The technique is applicable to buildings containing coupled and non-coupled, open section shear walls oriented in plan in any arbitrary manner. The use of the method is illustrated by the example of a complex building with unsymmetric plan, and the analytical natural frequencies of two shear wall building models are compared with those obtained experimentally by other investigators.     

Lagrangian measurements and modelling of fluid advection in the inner surf and swash zones

New laboratory and field data are presented on fluid advection into the swash zone. The data illustrate the region of the inner surf zone from which sediment can be directly advected into the swash zone during a single uprush, which is termed the advection length. Experiments were conducted by particle tracking in a Lagrangian reference frame, and were performed for monochromatic breaking waves, solitary bores, non-breaking solitary waves and field conditions. The advection length is normalised by the run-up length to give an advection ratio, A, and different advection ratios are identified on the basis of the experimental data. The data show that fluid enters the swash zone from a region of the inner surf zone that can extend a distance seaward of the bore collapse location that is approximately equal to half of the run-up length. This region is about eight times wider than the region predicted by the classical swash solution of Shen and Meyer [Shen, M.C., Meyer, R.E., 1963. Climb of a bore on a beach. Part 3. Runup. Journal of Fluid Mechanics 16, 113–125], as illustrated by Pritchard and Hogg [Pritchard, D., Hogg, A.J., 2005. On the transport of suspended sediment by a swash event on a plane beach. Coastal Engineering 52, 1–23]. Measured advection ratios for periodic waves show no significant trend with Iribarren number, consistent with self-similarity in typical swash flows. The data are compared to recent characteristic solutions of the non-linear shallow water wave (NLSW) equations and both finite difference and finite volume solutions of the NLSW equations.     

Spatial Variation of Sea Level Trend Along the Bangladesh Coast

The Bangladesh coast is threatened by rising sea level due to various factors. The results based on the analysis of past 22 years of tidal data of the Bangladesh coast reveal that the annual mean tidal level in the eastern Bangladesh coast is rising at an alarmingly high rate of 7.8 mm/year, which is almost twice the observed rate in the western region. This type of sea level trend seems to be the result of changing local conditions like increased precipitation and land subsidence during the recent decades. It seems that the higher rate of land subsidence in the eastern Bangladesh coast is the main causative factor for the steeper sea level trends there. The differential sea level trends show that the subsidence component in the sea level rise may be as high as 4 mm/year in the eastern Bangladesh coast. However, this needs to be verified with actual geological observations.     

Using Spatial Statistics to Examine the Pattern of Urban Land Development in Halifax–Dartmouth

This article examines the locational patterns of population and employment and the resultant changes in urban form in the Halifax–Dartmouth region between 1970 and 1996. The article employs the univariate and bivariate K function to measure spatial dependence or clustering within and between the classes of residential and commercial land parcels. The results of the K function estimates suggest that residential land parcels cluster together, commercial land parcels cluster together, and residential and commercial land parcels have become more clustered over time. Evidence of clustering provides insight into the changing urban form of the region and possible multinucleation.     

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.     

Exhumation of the Dayman dome metamorphic core complex, eastern Papua New Guinea

The ～750 km² Dayman dome of the Late Cretaceous Suckling‐Dayman massif, eastern Papua New Guinea, is a domed landform that rises to an elevation of 2850 m. The northern edge of the dome is a fault scarp >1000 m high that is now part of an active microplate boundary separating continental crust of the New Guinea highlands from continental and oceanic crust of the Woodlark microplate. Previous work has shown that a parallel belt of eclogite‐bearing core complexes north‐east of the Dayman dome were exhumed from up to 24–28 kbar in the last few millions of years. The remarkably fresh and lightly eroded scarp of the Dayman dome exposes shallowly‐dipping mylonitic (S1) metabasite rocks (500 m thick) on the northern flank of Mount Dayman. Field relationships near the base of this scarp show a cross cutting suite of ductile and brittle meso‐structures that includes: (i) rare ductile S2 folia with a shallowly ESE‐plunging mineral elongation lineation defined by sodic‐calcic blue amphibole; (ii) narrow steeply‐dipping ductile D2 shear zones; and (iii) semi‐brittle to brittle fault zones. Pumpellyite‐actinolite facies assemblages reported by previous workers to contain local aragonite, lawsonite and/or glaucophane are found in the core of the complex at elevations greater than 2000 m. These assemblages indicate peak metamorphic pressures of 6–9.5 kbar, demonstrating exhumation of the core of the Dayman dome from depths of 20–30 km. The S1 metamorphic mineral assemblage in metabasite includes actinolite‐chlorite‐epidote‐albite‐quartz‐calcite‐titanite, indicative of greenschist facies conditions for the main deformation. New mineral equilibria modelling suggests that this S1 assemblage evolved at 5.9–7.2 kbar at ～425 °C. Modelling variable Fe³⁺ indicates that the sodic‐calcic blue amphibole (D2) formed under a higher oxidation state compared with the S1 assemblage, probably at <4.5 kbar. A SE‐dipping, Mio‐Pliocene sedimentary sequence (Gwoira Conglomerate) forms a hangingwall block juxtaposed by low‐angle fault contact with the metabasite footwall. Prehnite‐bearing D3 brittle fault zones separate the two blocks and likely accommodated the final exhumation of the S1 greenschist facies assemblage in the footwall. These results indicate that the extensive Mt Dayman fault surface coincides with a domed S1 greenschist facies foliation that was last active at >20 km depth. Exhumation of this foliation must therefore be controlled by brittle faults of the active microplate boundary that are largely not observed in the study area. The structural record of the final exhumation of the Dayman dome to the surface was likely lost as a result of erosion, poor exposure or wide spacing of semi‐brittle to brittle fault zones.     

Surface water–groundwater interaction and chemistry in a mineral-armored hydrothermal outflow channel, Yellowstone National Park, USA

Small quantities of groundwater interact with hydrothermal surface water to drive in-stream geochemical processes in a silica-armored hot-spring outflow channel in Yellowstone National Park, USA. The objective of this study was to characterize the hydrology and geochemistry of this unique system in order to (1) learn more about the Yellowstone Plateau’s subsurface water mixing between meteoric and hydrothermal waters and (2) learn more about the chemical and physical processes that lead to accumulation of streambed cements, i.e., streambed armor. A combination of hydrological, geochemical, mineralogical, microscopic, and petrographic techniques were used to identify groundwater and surface-water exchange. Interaction could be identified in winter because of differences in surface water and groundwater composition but interaction at other times of the year cannot be ruled out. Dissolved constituents originating from groundwater (e.g., Fe(II) and Mg) were traced downstream until oxidation and/or subsequent precipitation with silica removed them, particularly where high affinity substrates like cyanobacterial surfaces were present. Because the stream lies in a relatively flat drainage basin and is fed mainly by a seasonally relatively stable hot spring, this system allowed study of the chemical processes along a stream without the obscuring effects of sedimentation.