Metamorphic condition of a regional metamorphic complex in the Omuta district in northern Kyushu,southwest Japan

A high‐temperature (T) metamorphic complex occurs in the Omuta district, northern Kyushu, Japan. Three metamorphic zones are defined based on pelitic mineral assemblage, i.e. chlorite–biotite zone, muscovite–andalusite zone and sillimanite–K‐feldspar zone with ascending metamorphic grade from north to south. Two isograds trend approximately east–west, which is oblique to the boundary between the metamorphic complex and the Tamana Granodiorite located on the southeast. The metamorphic condition of two pelitic rocks that occur in the muscovite–andalusite zone and sillimanite–K‐feldspar zone are estimated as 510 ±30 °C, 300 ±60 MPa and 720 ±30 °C, 620 ±60 MPa, respectively. Thermodynamic consideration reveals that use of the same geothermobarometer enables precise determination of the difference in pressure between the samples as 320 ±10 MPa. This indicates that the pelitic samples were metamorphosed at different depth by 11–12 km that is significantly larger than the geographic distance of 6.8 km between the sample localities. This also suggests that crustal thinning took place after the high‐T metamorphism. The high‐T metamorphic complex is, therefore, not of static contact metamorphism but of dynamic regional metamorphism. The present result combined with petrological and chronological similarities implies that this complex suffered the regional Ryoke metamorphism.     

Progressive changes in lithological association of the Sanbagawa metamorphic complex,Southwest Japan: Relict clinopyroxene and detrital zircon perspectives

The main tectono‐stratigraphic unit (Shirataki unit) of the Sanbagawa metamorphic complex in central Shikoku is characterized by abundant mafic schist layers that show the mid‐ocean ridge basalt (MORB) affinity. These MORB‐derived schist layers are absent in a southern (structurally lower) domain within the unit. Instead, sporadic occurrences of small metabasite lenses that contain relict igneous minerals (Ti‐rich augite and kaersutite) indicative of alkali basalt magmatism are newly recognized in the southern domain. Compositions of relict clinopyroxene in metabasalt are useful to identify the tectonic setting and origin of the protolith basalt, and those in each unit of the Sanbagawa metamorphic complex are presented. The metamorphic grade of the Shirataki unit generally increases structurally upwards in the southern side of the highest‐grade zone, and metamorphic zonation is subparallel to lithostratigraphic succession. The protolith assemblage of the Shirataki unit shows a distinct change from the southern low‐grade domain (lower Shirataki subunit) composed of terrigenous sedimentary rocks (mudstone and sandstone) with minor alkali basalt to the northern higher‐grade domain (upper Shirataki subunit) consisting of terrigenous and pelagic sedimentary rocks with abundant MORB. The youngest detrital zircon U–Pb ages (ca 95–90 Ma) suggest that both domains have Late Cretaceous depositional ages at the trench. Progressive peeling of oceanic plate stratigraphy during subduction can account for the observed change of lithological association in the Shirataki unit.     

Scoria cone formation through a violent Strombolian eruption: Irao Volcano, SW Japan

Scoria cones are common volcanic features and are thought to most commonly develop through the deposition of ballistics produced by gentle Strombolian eruptions and the outward sliding of talus. However, some historic scoria cones have been observed to form with phases of more energetic violent Strombolian eruptions (e.g., the 1943–1952 eruption of Parícutin, central Mexico; the 1975 eruption of Tolbachik, Kamchatka), maintaining volcanic plumes several kilometers in height, sometimes simultaneous with active effusive lava flows. Geologic evidence shows that violent Strombolian eruptions during cone formation may be more common than is generally perceived, and therefore it is important to obtain additional insights about such eruptions to better assess volcanic hazards. We studied Irao Volcano, the largest basaltic monogenetic volcano in the Abu Monogenetic Volcano Group, SW Japan. The geologic features of this volcano are consistent with a violent Strombolian eruption, including voluminous ash and fine lapilli beds (on order of 10^?1 km³ DRE) with simultaneous scoria cone formation and lava effusion from the base of the cone. The characteristics of the volcanic products suggest that the rate of magma ascent decreased gradually throughout the eruption and that less explosive Strombolian eruptions increased in frequency during the later stages of activity. During the eruption sequence, the chemical composition of the magma became more differentiated. A new K–Ar age determination for phlogopite crystallized within basalt dates the formation of Irao Volcano at 0.4?±?0.05 Ma.     

Full-scale dynamic testing of response-controlled buildings and their components: concepts,methods, and findings

A series of shake-table tests was conducted by inserting and replacing 4 different types of dampers, or by removing them in a full-scale 5-story steel frame building. The objective is to validate response-control technologies that are increasingly adopted for major Japanese buildings without being attested to-date by a major earthquake. Test results are briefly described, and good performance of the dampers and frame demonstrated. The concepts of the full-scale building tests and various contributions are discussed. The difficulty associated with full-scale dynamic testing is explained.     

Critical notch depths for failure of coastal limestone cliffs: case study at Kuro‐shima Island,Okinawa, Japan

Development of a notch at the base of a cliff reduces cliff stability and often induces a collapse. Pleistocene limestone coastal cliffs of elevation 5?m in Kuro‐shima, Ryukyu Islands, have a prominent notch with a depth of 3–4?m at their bases. Around these coastal cliffs, collapses different from previous studies of cliff collapses in the Ryukyu Islands were found; collapses in Kuro‐shima have a horizontal failure surface. The horizontal failure surface, situated at the height of the failure surface corresponding to the retreat point of the notch, is bounded by vertical joints cutting the whole cliff and the reef flat in front of the cliff. Two types of horizontal failure surface were found, triangular and quadrangular; the distinction appears to depend on the angle between the vertical joints and the front face of the cliff. Prior to collapse, these cliffs appear to have been separated from the adjacent cliffs by the development of vertical joints. Consequently, a cliff that will collapse can be identified in advance; cliff instability is strongly dependent on the development of a notch. To study the effect of notch development on cliff collapse, the notch depth at which collapse occurs was calculated using stability analysis. Instability of a cliff increases with notch depth; collapse occurs at the horizontal failure surface when the ratio of the notch depth to the seaward length of the cliff is approximately 0·5–0·7 for a triangular failure surface, and 0·7–0·9 for a quadrangular failure surface. Copyright © 2010 John Wiley & Sons, Ltd.     

Instability of coral limestone cliffs due to extreme waves

Many boulders are located around the coastal cliffs with height of below 5 m made of coral limestone at Kuro‐shima, Okinawa, Japan. The origin of the boulders appears to be coral limestone cliffs which show developed notches. We undertook stability analysis, involving the wave pressure due to tsunamis, of wave‐induced collapse of the cliffs. We find that extreme waves are capable of inducing cliff collapse, as observed in circumstances where gravity is insufficient. Copyright © 2010 John Wiley and Sons, Ltd.     

Detection and isolation of p-nitrophenol-lowering bacteria from intestine of marine fishes caught in Japanese waters

To determine the existence of p-nitrophenol (PNP)-lowering bacteria in intestine of Japanese coastal fish, the gastro-intestinal contents were incubated in Brain Heart Infusion (BHI) broth and minimal medium (MM) broths containing 1 mmol/L PNP at 30 °C for 7 days. Among 26 samples of 19 fish species, 17 samples showed a decrease in PNP of 0.5-0.8 mmol/L in BHI broth, but no decrease was shown in MM broth. Eighteen PNP-lowering bacterial strains were isolated from four fishes. All of the strains were identified as Lactococcus lactis subsp. lactis. Three L. lactis strains JS1-3 isolated from Japanese seabass Lateolabrax japonicus showed the highest PNP-lowering activity (0.44 mmol/L). Optimum temperature and pH for the growth and PNP decreasing corresponded with the marine environment. These results suggested that marine fishes have PNP decreasing bacteria in their intestine. These bacteria might protect host fish from toxicities of PNP and PNP related compounds.     

Crystal bending,subgrain boundary development,and recrystallization in orthopyroxene during granulite-facies deformation

A prominent feature of a granulite-facies shear zone from the Hidaka Main Zone (Japan) is the folding of orthopyroxene (opx) porphyroclasts. Dislocation density estimated by transmission electron microscope (TEM) and chemical etching in homogeneously folded domains is too low to account for the amplitude of crystallographic bending, leading us to propose a model similar to “flexural slip” folding, where folded layers are micrometer-wide opx layers between thin planar clinopyroxene (cpx) exsolutions. Extension (compression) in the extrados (intrados) of the folded layer is accommodated by dislocations at the cpx–opx interfaces. Alternatively to distributed deformation, crystal bending also localizes in grain boundaries (GBs), mostly oriented close to the (001) plane and with various misorientation angles but misorientation axes consistently close to the b-axis. For misorientation up to a few degrees, GBs were imaged as tilt walls composed of regularly spaced (100)[001] dislocations. For misorientation angles of 7°, individual dislocations are no longer visible, but high-resolution TEM (HRTEM) observation showed the partial continuity of opx tetrahedral chains through the boundary. For 21° misorientation, the two adjacent crystals are completely separated by an incoherent boundary. In spite of these atomic-scale variations, all GBs share orientation and rotation axis, suggesting a continuous process of misorientation by symmetric incorporation of (100)[001] dislocations. In addition to the dominant GBs perpendicular to the (100) plane, boundaries at low angle with (100) planes are also present, incorporating dislocations with a component of Burgers vector along the a-axis. The two kinds of boundaries combine to delimit subgrains, which progressively rotate with respect to host grains around the b-axis, eventually leading to recrystallization of large porphyroclasts.     

Mixing of magmatic CO2 into volcano groundwater flow at Aso volcano assessed combining carbon and water stable isotopes

To understand deep groundwater flow systems and their interaction with CO₂ emanated from magma at depth in a volcanic edifice, deep groundwater samples were collected from hot spring wells in the Aso volcanic area for hydrogen, oxygen and carbon isotope analyses and measurements of the stable carbon isotope ratios and concentrations of dissolved inorganic carbon (DIC). Relations between the stable carbon isotope ratio (δ¹³C_DIC) and DIC concentrations of the sampled waters show that magma-derived CO₂ mixed into the deep groundwater. Furthermore, groundwaters of deeper areas, except samples from fumarolic areas, show higher δ¹³C_DIC values. The waters' stable hydrogen and oxygen isotope ratios (δD and δ¹⁸O) reflect the meteoric-water origin of that region's deep groundwater. A negative correlation was found between the altitude of the well bottom and the altitude of groundwater recharge as calculated using the equation of the recharge-water line and δD value. This applies especially in the Aso-dani area, where deeper groundwater correlates with higher recharge. Groundwater recharged at high altitude has higher δ¹³C_DIC of than groundwater recharged at low altitude, strongly suggesting that magmatic CO₂ is present to a much greater degree in deeper groundwater. These results indicate that magmatic CO₂ mixes into deeper groundwater flowing nearer the magma conduit or chamber.